lkml.org 
[lkml]   [2020]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] x86/platform/uv: Update sysfs document file
Date
Update sysfs Document file to include moved /proc leaves.

Signed-off-by: Mike Travis <mike.travis@hpe.com>
---
Documentation/ABI/testing/sysfs-firmware-sgi_uv | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
index ca5cdccdb1a8..fa7f7aefa5ed 100644
--- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv
+++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -7,9 +7,24 @@ Description:

Under that directory are a number of read-only attributes:

+ archtype
+ hub_type
+ hubless
partition_id
uv_type

+ The archtype entry contains the UV architecture type that
+ is used to select arch-dependent addresses and features.
+ If can be set via the OEM_ID in the ACPI MADT table or by
+ UVsystab entry both passed from UV BIOS.
+
+ The hub_type entry is used to select the type of hub which is
+ similar to uv_type but encoded in a binary format. Include
+ the file uv_hub.h to get the definitions.
+
+ The hubless entry basically is present and set only if there
+ is no hub. In this case the hub_type entry is not present.
+
The partition_id entry contains the partition id.
UV systems can be partitioned into multiple physical
machines, which each partition running a unique copy
@@ -18,6 +33,7 @@ Description:

The uv_type entry contains the hub revision number.
This value can be used to identify the UV system version:
+ "0.*" = Hubless UV ('*' is subtype)
"3.0" = UV2
"5.0" = UV3
"7.0" = UV4
--
2.21.0
\
 
 \ /
  Last update: 2020-11-25 18:31    [W:0.182 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site