lkml.org 
[lkml]   [2020]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/4] mmc: sdhci-xenon: use clk only with DT
Hi Ulf


wt., 24 lis 2020 o 12:31 Ulf Hansson <ulf.hansson@linaro.org> napisał(a):
>
> On Fri, 20 Nov 2020 at 04:27, Marcin Wojtas <mw@semihalf.com> wrote:
> >
> > As a preparation for supporting ACPI, modify the driver
> > to use the clk framework only when booting with DT -
> > otherwise rely on the configuration done by firmware.
> > For that purpose introduce also a custom SDHCI get_max_clock
> > callback.
> >
> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
>
> [...]
>
> > @@ -561,9 +574,11 @@ static int xenon_probe(struct platform_device *pdev)
> > pm_runtime_put_noidle(&pdev->dev);
> > xenon_sdhc_unprepare(host);
> > err_clk_axi:
> > - clk_disable_unprepare(priv->axi_clk);
> > + if (dev->of_node)
> > + clk_disable_unprepare(priv->axi_clk);
> > err_clk:
> > - clk_disable_unprepare(pltfm_host->clk);
> > + if (dev->of_node)
> > + clk_disable_unprepare(pltfm_host->clk);
>
> There's no need to check the dev->of_node, I believe. The
> clk_disable_unprepare() is capable of managing a NULL pointer as
> in-parameter.
>

Indeed, clk_disable_unprepare() can handle the NULL pointers. I will
wait a couple of days for other comments/remarks and will update this
patch in v3.

Best regards,
Marcin

\
 
 \ /
  Last update: 2020-11-25 12:52    [W:0.072 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site