lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node to DT
Date
Add poweroff node to allow the board to power itself off after shutdown
by disabling the SYSTEM and CPUX regulators (U5 resp. U6). The RST
button can be used to restart the board.

Signed-off-by: Michael Klein <michael@fossekall.de>
---
arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 4c6704e4c57e..ea2fa48a1647 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -46,6 +46,11 @@ sw4 {
};
};

+ poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ };
+
reg_vdd_cpux: vdd-cpux-regulator {
compatible = "regulator-gpio";
regulator-name = "vdd-cpux";
--
2.29.2
\
 
 \ /
  Last update: 2020-11-24 14:38    [W:0.247 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site