lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] Revert "usb: cdns3: core: quit if it uses role switch class"
Date



Best regards,
Peter Chen

> -----Original Message-----
> From: Roger Quadros <rogerq@ti.com>
> Sent: 2020年11月24日 17:39
> To: Peter Chen <peter.chen@nxp.com>
> Cc: pawell@cadence.com; gregkh@linuxfoundation.org; balbi@kernel.org;
> linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH] Revert "usb: cdns3: core: quit if it uses role switch class"
>
> Peter,
>
> On 24/11/2020 08:43, Peter Chen wrote:
> > On 20-11-23 13:50:51, Roger Quadros wrote:
> >> This reverts commit 50642709f6590fe40afa6d22c32f23f5b842aed5.
> >>
> >> This commit breaks hardware based role switching on TI platforms.
> >> cdns->role_sw is always going to be non-zero as it is a pointer
> >> to the usb_role_switch instance. Some other means needs to be used if
> >> hardware based role switching is not required by the platform.
> >>
> >> Signed-off-by: Roger Quadros <rogerq@ti.com>
> >> ---
> >> drivers/usb/cdns3/core.c | 4 ----
> >> 1 file changed, 4 deletions(-)
> >>
> >> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> >> index a0f73d4711ae..4c1445cf2ad0 100644
> >> --- a/drivers/usb/cdns3/core.c
> >> +++ b/drivers/usb/cdns3/core.c
> >> @@ -280,10 +280,6 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
> >> enum usb_role real_role, current_role;
> >> int ret = 0;
> >>
> >> - /* Depends on role switch class */
> >> - if (cdns->role_sw)
> >> - return 0;
> >> -
> >> pm_runtime_get_sync(cdns->dev);
> >>
> >> current_role = cdns->role;
> >> --
> >
> > Hi Roger,
> >
> > I am sorry about that. Do you use role switch /sys entry, if you have
> > used, I prefer using "usb-role-switch" property at dts to judge if SoC
> > OTG signals or external signals for role switch. If you have not used
> > it, I prefer only setting cdns->role_sw for role switch use cases.
> >
>
> We use both hardware role switch and /sys entries for manually forcing a
> certain role.
>
> We do not set any "usb-role-switch" property at DTS.
>
> Currently cdns->role_sw is being always set by driver irrespective of any DT
> property, so this patch is clearly wrong and needs to be reverted.
>
> What do you think?
>

Could you accept below fix?

diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 2e469139769f..fdd52e87a7b2 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -280,8 +280,8 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
enum usb_role real_role, current_role;
int ret = 0;

- /* Depends on role switch class */
- if (cdns->role_sw)
+ /* quit if switch role through external signals */
+ if (device_property_read_bool(cdns->dev, "usb-role-switch"))
return 0;

pm_runtime_get_sync(cdns->dev);

Peter
\
 
 \ /
  Last update: 2020-11-24 11:01    [W:0.698 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site