lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH][next] scsi: pm8001: remove space in a debug message
Date
From: Colin Ian King <colin.king@canonical.com>

There are two words that need separating with a space in a
pm8001_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 08d6cc9b50db..c8d4d87c5473 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
pm8001_dbg(pm8001_ha, INIT,
- "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
+ "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));

/* step 13: bring the IOP and AAP1 out of reset */
--
2.29.2
\
 
 \ /
  Last update: 2020-11-24 10:44    [W:0.058 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site