lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 00/10] Introduced new Cadence USBSSP DRD Driver.
From
Date
On 24/11/20 2:51 PM, Pawel Laszczak wrote:
> Peter,
>
>> On 20-11-19 15:12:57, Pawel Laszczak wrote:
>>> This patch introduce new Cadence USBSS DRD driver to linux kernel.
>>>
>>> The Cadence USBSS DRD Controller is a highly configurable IP Core which
>>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and
>>> Host Only (XHCI)configurations.
>>>
>>> The current driver has been validated with FPGA burned. We have support
>>> for PCIe bus, which is used on FPGA prototyping.
>>>
>>> The host side of USBSS-DRD controller is compliance with XHCI
>>> specification, so it works with standard XHCI Linux driver.
>>>
>>> The device side of USBSS DRD controller is compliant with XHCI.
>>> The architecture for device side is almost the same as for host side,
>>> and most of the XHCI specification can be used to understand how
>>> this controller operates.
>>>
>>> This controller and driver support Full Speed, Hight Speed, Supper Speed
>>> and Supper Speed Plus USB protocol.
>>>
>>> The prefix cdnsp used in driver has chosen by analogy to cdn3 driver.
>>> The last letter of this acronym means PLUS. The formal name of controller
>>> is USBSSP but it's to generic so I've decided to use CDNSP.
>>>
>>> The patch 1: adds support for DRD CDNSP.
>>> The patch 2: separates common code that can be reusable by cdnsp driver.
>>> The patch 3: moves reusable code to separate module.
>>> The patch 4: changes prefixes in reusable code from cdns3 to common cdns.
>>> The patch 5: adopts gadget_dev pointer in cdns structure to make possible
>>> use it in both drivers.
>>> The patches 6-8: add the main part of driver and has been intentionally
>>> split into 3 part. In my opinion such division should not
>>> affect understanding and reviewing the driver, and cause that
>>> main patch (7/8) is little smaller. Patch 6 introduces main
>>> header file for driver, 7 is the main part that implements all
>>> functionality of driver and 8 introduces tracepoints.
>>> The patch 9: Adds cdns3 prefixes to files related with USBSS driver.
>>> the patch 10: Adds USBSSP DRD IP driver entry to MAINTAINERS file.
>>>
>>> Changlog from v2:
>>> - removed not used pdev parameter from cdnsp_read/wite_64 functions
>>> - fixed incorrect value assigned to CDNSP_ENDPOINTS_NUM (32 -> 31)
>>> - replaced some constant value with CDNSP_ENDPOINTS_NUM macro
>>> - replaced 'true' with '1' in bits description in cdnsp-gadget.h file
>>> - fixed some typos
>>> - some other less important changes suggested by Peter Chen
>>
>> Hi Pawel,
>>
>> I have updated my -next tree as the latest usb-next tree which v5.10-rc4
>> is included, would you please rebase my tree and send again, I could apply your
>> patches and test, if test could pass, I will apply it to my -next tree.
>> You don't need to rebase again since it is a huge patch set, will take some
>> efforts for rebase.
>>
>
> I'll try to post it tomorrow.

Pawel, have you tested TI J7 for regressions after this series? After
your latest changes, can you post a tree which someone in TI can test?

Thanks,
Sekhar

\
 
 \ /
  Last update: 2020-11-24 10:39    [W:0.072 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site