lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] clk: tegra30: Use 300MHz for video decoder by default
From
Date
Quoting Dmitry Osipenko (2020-11-15 06:10:04)
> 15.11.2020 00:16, Stephen Boyd пишет:
> > Quoting Dmitry Osipenko (2020-11-04 05:48:10)
> >> The 600MHz is a too high clock rate for some SoC versions for the video
> >> decoder hardware and this may cause stability issues. Use 300MHz for the
> >> video decoder by default, which is supported by all hardware versions.
> >>
> >> Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
> >> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> >> ---
> >
> > Should this go to clk-fixes? Thierry?
> >
>
> Either way should be good. The fix isn't critical because 600MHz seems
> to be working okay on unsupported hardware.
>
> Potentially this could vary depending on a board, but then I don't think
> that there are actively-supported boards which would notice this change.
>

Ok sounds like Thierry can pick it up.

\
 
 \ /
  Last update: 2020-11-25 03:16    [W:0.061 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site