lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH][next] scsi: pm8001: remove space in a debug message
From
Date
On Tue, 2020-11-24 at 09:38 +0000, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> There are two words that need separating with a space in a
> pm8001_dbg message. Fix it.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
> drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c
> b/drivers/scsi/pm8001/pm8001_hwi.c
> index 08d6cc9b50db..c8d4d87c5473 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info
> *pm8001_ha)
> regVal = pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK);
> pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK,
> regVal3);
> pm8001_dbg(pm8001_ha, INIT,
> - "GSM 0x700048 - Write Data Parity Check Enableis set
> to = 0x%x\n",
> + "GSM 0x700048 - Write Data Parity Check Enable is
> set to = 0x%x\n",
> pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK));
>
> /* step 13: bring the IOP and AAP1 out of reset */

Reviewed-by: Ewan D. Milne <emilne@redhat.com>


\
 
 \ /
  Last update: 2020-11-25 00:25    [W:0.062 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site