lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v1 2/4] KVM: arm64: GICv4.1: Try to save hw pending state in save_pending_tables
From
Date
On 2020/11/23 17:18, Marc Zyngier wrote:
> On 2020-11-23 06:54, Shenming Lu wrote:
>> After pausing all vCPUs and devices capable of interrupting, in order
>         ^^^^^^^^^^^^^^^^^
> See my comment below about this.
>
>> to save the information of all interrupts, besides flushing the pending
>> states in kvm’s vgic, we also try to flush the states of VLPIs in the
>> virtual pending tables into guest RAM, but we need to have GICv4.1 and
>> safely unmap the vPEs first.
>>
>> Signed-off-by: Shenming Lu <lushenming@huawei.com>
>> ---
>>  arch/arm64/kvm/vgic/vgic-v3.c | 62 +++++++++++++++++++++++++++++++----
>>  1 file changed, 56 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
>> index 9cdf39a94a63..e1b3aa4b2b12 100644
>> --- a/arch/arm64/kvm/vgic/vgic-v3.c
>> +++ b/arch/arm64/kvm/vgic/vgic-v3.c
>> @@ -1,6 +1,8 @@
>>  // SPDX-License-Identifier: GPL-2.0-only
>>
>>  #include <linux/irqchip/arm-gic-v3.h>
>> +#include <linux/irq.h>
>> +#include <linux/irqdomain.h>
>>  #include <linux/kvm.h>
>>  #include <linux/kvm_host.h>
>>  #include <kvm/arm_vgic.h>
>> @@ -356,6 +358,39 @@ int vgic_v3_lpi_sync_pending_status(struct kvm
>> *kvm, struct vgic_irq *irq)
>>      return 0;
>>  }
>>
>> +/*
>> + * With GICv4.1, we can get the VLPI's pending state after unmapping
>> + * the vPE. The deactivation of the doorbell interrupt will trigger
>> + * the unmapping of the associated vPE.
>> + */
>> +static void get_vlpi_state_pre(struct vgic_dist *dist)
>> +{
>> +    struct irq_desc *desc;
>> +    int i;
>> +
>> +    if (!kvm_vgic_global_state.has_gicv4_1)
>> +        return;
>> +
>> +    for (i = 0; i < dist->its_vm.nr_vpes; i++) {
>> +        desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
>> +        irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
>> +    }
>> +}
>> +
>> +static void get_vlpi_state_post(struct vgic_dist *dist)
>
> nit: the naming feels a bit... odd. Pre/post what?

My understanding is that the unmapping is a preparation for get_vlpi_state...
Maybe just call it unmap/map_all_vpes?

>
>> +{
>> +    struct irq_desc *desc;
>> +    int i;
>> +
>> +    if (!kvm_vgic_global_state.has_gicv4_1)
>> +        return;
>> +
>> +    for (i = 0; i < dist->its_vm.nr_vpes; i++) {
>> +        desc = irq_to_desc(dist->its_vm.vpes[i]->irq);
>> +        irq_domain_activate_irq(irq_desc_get_irq_data(desc), false);
>> +    }
>> +}
>> +
>>  /**
>>   * vgic_v3_save_pending_tables - Save the pending tables into guest RAM
>>   * kvm lock and all vcpu lock must be held
>> @@ -365,14 +400,17 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
>>      struct vgic_dist *dist = &kvm->arch.vgic;
>>      struct vgic_irq *irq;
>>      gpa_t last_ptr = ~(gpa_t)0;
>> -    int ret;
>> +    int ret = 0;
>>      u8 val;
>>
>> +    get_vlpi_state_pre(dist);
>> +
>>      list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
>>          int byte_offset, bit_nr;
>>          struct kvm_vcpu *vcpu;
>>          gpa_t pendbase, ptr;
>>          bool stored;
>> +        bool is_pending = irq->pending_latch;
>>
>>          vcpu = irq->target_vcpu;
>>          if (!vcpu)
>> @@ -387,24 +425,36 @@ int vgic_v3_save_pending_tables(struct kvm *kvm)
>>          if (ptr != last_ptr) {
>>              ret = kvm_read_guest_lock(kvm, ptr, &val, 1);
>>              if (ret)
>> -                return ret;
>> +                goto out;
>>              last_ptr = ptr;
>>          }
>>
>>          stored = val & (1U << bit_nr);
>> -        if (stored == irq->pending_latch)
>> +
>> +        /* also flush hw pending state */
>
> This comment looks out of place, as we aren't flushing anything.

Ok, I will correct it.

>
>> +        if (irq->hw) {
>> +            WARN_RATELIMIT(irq_get_irqchip_state(irq->host_irq,
>> +                        IRQCHIP_STATE_PENDING, &is_pending),
>> +                       "IRQ %d", irq->host_irq);
>
> Isn't this going to warn like mad on a GICv4.0 system where this, by definition,
> will generate an error?

As we have returned an error in save_its_tables if hw && !has_gicv4_1, we don't
have to warn this here?

>
>> +        }
>> +
>> +        if (stored == is_pending)
>>              continue;
>>
>> -        if (irq->pending_latch)
>> +        if (is_pending)
>>              val |= 1 << bit_nr;
>>          else
>>              val &= ~(1 << bit_nr);
>>
>>          ret = kvm_write_guest_lock(kvm, ptr, &val, 1);
>>          if (ret)
>> -            return ret;
>> +            goto out;
>>      }
>> -    return 0;
>> +
>> +out:
>> +    get_vlpi_state_post(dist);
>
> This bit worries me: you have unmapped the VPEs, so any interrupt that has been
> generated during that phase is now forever lost (the GIC doesn't have ownership
> of the pending tables).

In my opinion, during this phase, the devices capable of interrupting should have
already been paused (prevent from sending interrupts), such as VFIO migration protocol
has already realized it.

>
> Do you really expect the VM to be restartable from that point? I don't see how
> this is possible.
>

If the migration has encountered an error, the src VM might be restarted, so we have to
map the vPEs back.

>> +
>> +    return ret;
>>  }
>>
>>  /**
>
> Thanks,
>
>         M.

Thanks,
Shenming

\
 
 \ /
  Last update: 2020-11-24 08:44    [W:0.087 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site