lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/3] Bluetooth: Power down controller when suspending
Re-send to NXP email addresses for Chin-Ran Lo and Amitkumar Karwar
(Marvell wireless IP acquired by NXP)



On Tue, Nov 24, 2020 at 11:02 AM Abhishek Pandit-Subedi
<abhishekpandit@chromium.org> wrote:
>
> Hi Marcel,
>
>
> On Mon, Nov 23, 2020 at 3:46 AM Marcel Holtmann <marcel@holtmann.org> wrote:
> >
> > Hi Abhishek,
> >
> > > This patch series adds support for a quirk that will power down the
> > > Bluetooth controller when suspending and power it back up when resuming.
> > >
> > > On Marvell SDIO Bluetooth controllers (SD8897 and SD8997), we are seeing
> > > a large number of suspend failures with the following log messages:
> > >
> > > [ 4764.773873] Bluetooth: hci_cmd_timeout() hci0 command 0x0c14 tx timeout
> > > [ 4767.777897] Bluetooth: btmrvl_enable_hs() Host sleep enable command failed
> > > [ 4767.777920] Bluetooth: btmrvl_sdio_suspend() HS not actived, suspend failed!
> > > [ 4767.777946] dpm_run_callback(): pm_generic_suspend+0x0/0x48 returns -16
> > > [ 4767.777963] call mmc2:0001:2+ returned -16 after 4882288 usecs
> > >
> > > The daily failure rate with this signature is quite significant and
> > > users are likely facing this at least once a day (and some unlucky users
> > > are likely facing it multiple times a day).
> > >
> > > Given the severity, we'd like to power off the controller during suspend
> > > so the driver doesn't need to take any action (or block in any way) when
> > > suspending and power on during resume. This will break wake-on-bt for
> > > users but should improve the reliability of suspend.
> > >
> > > We don't want to force all users of MVL8897 and MVL8997 to encounter
> > > this behavior if they're not affected (especially users that depend on
> > > Bluetooth for keyboard/mouse input) so the new behavior is enabled via
> > > module param. We are limiting this quirk to only Chromebooks (i.e.
> > > laptop). Chromeboxes will continue to have the old behavior since users
> > > may depend on BT HID to wake and use the system.
> >
> > I don’t have a super great feeling with this change.
> >
> > So historically only hciconfig hci0 up/down was doing a power cycle of the controller and when adding the mgmt interface we moved that to the mgmt interface. In addition we added a special case of power up via hdev->setup. We never had an intention that the kernel otherwise can power up/down the controller as it pleases.
>
> Aside from the powered setting, the stack is resilient to the
> controller crashing (which would be akin to a power off and power on).
> From the view of bluez, adapter lost and power down should be almost
> equivalent right? ChromeOS has several platforms where Bluetooth has
> been reset after suspend, usually due USB being powered off in S3, and
> the stack is still well-behaving when that occurs.
>
> >
> > Can we ask Marvell first to investigate why this is fundamentally broken with their hardware?
>
> +Chin-Ran Lo and +Amitkumar Karwar (added based on changes to
> drivers/bluetooth/btmrvl_main.c)
>
> Could you please take a look at the original cover letter and comment
> (or add others at Marvell who may be able to)? Is this a known issue
> or a fix?
>
> >Since what you are proposing is a pretty heavy change that might has side affects. For example the state machine for the mgmt interface has no concept of a power down/up from the kernel. It is all triggered by bluetoothd.
> >
> > I am careful here since the whole power up/down path is already complicated enough.
> >
>
> That sounds reasonable. I have landed this within ChromeOS so we can
> test whether a) this improves stability enough and b) whether the
> power off/on in the kernel has significant side effects. This will go
> through our automated testing and dogfooding over the next few weeks
> and hopefully identify those side-effects. I will re-raise this topic
> with updates once we have more data.
>
> Also, in case it wasn't very clear, I put this behind a module param
> that defaults to False because this is so heavy handed. We're only
> using it on specific Chromebooks that are exhibiting the worst
> behavior and not disabling it wholesale for all btmrvl controllers.
>
> Thanks
> Abhishek
>
> > Regards
> >
> > Marcel
> >

\
 
 \ /
  Last update: 2020-11-24 20:07    [W:0.044 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site