lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ath10k: qmi: Skip host capability request for Xiaomi Poco F1
On Mon 23 Nov 04:28 CST 2020, Amit Pundir wrote:

> Workaround to get WiFi working on Xiaomi Poco F1 (sdm845)
> phone. We get a non-fatal QMI_ERR_MALFORMED_MSG_V01 error
> message in ath10k_qmi_host_cap_send_sync(), but we can still
> bring up WiFi services successfully on AOSP if we ignore it.
>
> We suspect either the host cap is not implemented or there
> may be firmware specific issues. Firmware version is
> QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1
>
> qcom,snoc-host-cap-8bit-quirk didn't help. If I use this
> quirk, then the host capability request does get accepted,
> but we run into fatal "msa info req rejected" error and
> WiFi interface doesn't come up.
>
> Attempts are being made to debug the failure reasons but no
> luck so far. Hence this device specific workaround instead
> of checking for QMI_ERR_MALFORMED_MSG_V01 error message.
> Tried ath10k/WCN3990/hw1.0/wlanmdsp.mbn from the upstream
> linux-firmware project but it didn't help and neither did
> building board-2.bin file from stock bdwlan* files.
>
> This workaround will be removed once we have a viable fix.
> Thanks to postmarketOS guys for catching this.
>
> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
> ---
> We dropped this workaround last time in the favor of
> a generic dts quirk to skip host cap check. But that
> is under under discussion for a while now,
> https://lkml.org/lkml/2020/9/25/1119, so resending
> this short term workaround for the time being.
>

I still want the quirk, because we have this on other machines as well.

> v2: ath10k-check complained about a too long line last
> time, so moved the comment to a new line.
>
> drivers/net/wireless/ath/ath10k/qmi.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
> index ae6b1f402adf..1c58b0ff1d29 100644
> --- a/drivers/net/wireless/ath/ath10k/qmi.c
> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
> @@ -653,7 +653,9 @@ static int ath10k_qmi_host_cap_send_sync(struct ath10k_qmi *qmi)
>
> /* older FW didn't support this request, which is not fatal */
> if (resp.resp.result != QMI_RESULT_SUCCESS_V01 &&
> - resp.resp.error != QMI_ERR_NOT_SUPPORTED_V01) {
> + resp.resp.error != QMI_ERR_NOT_SUPPORTED_V01 &&
> + /* Xiaomi Poco F1 workaround */

If we go with a temporary approach this comment should describe why this
is here. (And it probably shouldn't be in the middle of the expression
list in the conditional.

Regards,
Bjorn

> + !of_machine_is_compatible("xiaomi,beryllium")) {
> ath10k_err(ar, "host capability request rejected: %d\n", resp.resp.error);
> ret = -EINVAL;
> goto out;
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-11-24 18:51    [W:0.034 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site