lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/19] dmaengine/soc: k3-udma: Add support for BCDMA and PKTDMA
On 17-11-20, 12:56, Peter Ujfalusi wrote:
> Hi,
>
> The series have build dependency on ti_sci/soc series (v2):
> https://lore.kernel.org/lkml/20201008115224.1591-1-peter.ujfalusi@ti.com/
>
> Santosh kindly created immutable branch holdinf the series:
> git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.11/drivers-soc

Santosh, Can I have a signed tag for this please?

>
> The unmapped event handling in INTA is already mainline.
>
> Changes since v1:
> - Both DT binding document has been updated to address all comments and
> suggestions from Rob, all checks are passing on them
> - included new patch to fix the normal channel start offset when ultra-high
> capacity channels are available for the UDMA and updated the BCDMA/PKTDMA
> patches along the same line
> - Re-arranged the patches for Vinod so that the preparational patches and fixes
> can be picked up separately (they still have dependency on Santosh's branch):
>
> patch 1-5: Fixes and new features for existing devices using UDMA, but the
> the BCDMA/PKTDMA support is building on top of these.
> Build dependency on Santosh's branch
> patch 6: Optional second stage router configuration callback support in core
> patch 7-9: Per channel coherency support in core and use it in dmatest.
> patch 10-: Initial AM64 BCDMA and PKTDMA support
>
> The DMSS introduced within AM64 as a simplified Data movement engine is built
> on similar grounds as the K3 NAVSS and UDMAP, but with significant architectural
> changes.
>
> - Rings are built into the DMAs
> The DMAs no longer use the general purpose ringacc, all rings has been moved
> inside of the DMAs. The new rings within the DMAs are simplified to be dual
> directional compared to the uni-directional rings in ringacc.
> There is no more of a concept of generic purpose rings, all rings are assigned
> to specific channels or flows.
>
> - Per channel coherency support
> The DMAs use the 'ASEL' bits to select data and configuration fetch path. The
> ASEL bits are placed at the unused parts of any address field used by the
> DMAs (pointers to descriptors, addresses in descriptors, ring base addresses).
> The ASEL is not part of the address (the DMAs can address 48bits).
> Individual channels can be configured to be coherent (via ACP port) or non
> coherent individually by configuring the ASEL to appropriate value.
>
> - Two different DMAs (well, three actually)
> PKTDMA
> Similar to UDMAP channels configured in packet mode.
> The flow configuration of the channels has changed significantly in a way that
> each channel have at least one flow assigned at design time and each flow is
> directly mapped to corresponding ring.
> When multiple flows are set, the channel can only use the flows within it's
> assigned range.
> PKTDMA also introduced multiple tflows which did not existed in UDMAP.
>
> BCDMA
> It has two types of channels:
> - split channels (tchan/rchan): Similar to UDMAP channels configured in TR mode.
> - Block copy channels (bchan): Similar to EDMA or traditional DMA channels, they
> can be used for mem2mem type of transfers or to service peripherals not
> accessible via PSI-L by using external triggers for the TR.
> BCDMA channels do not have support for multiple flows
>
> With the introduction of the new DMAs (especially the BCDMA) we also need to
> update the resource manager code to support the second range from sysfw for
> UDMA channels.
>
> The two outstanding change in the series in my view is
> the handling of the DMAs sideband signal of ASEL to select path to provide
> coherency or non coherency.
>
> The smaller one is the device_router_config callback to allow the configuration
> of the triggers when BCDMA is servicing a triggering peripheral to solve a
> chicken-egg situation:
> The router needs to know the event number to send which in turn depends on the
> channel we got for servicing the peripheral.
>
> Regards,
> Peter
> ---
> Grygorii Strashko (1):
> soc: ti: k3-ringacc: add AM64 DMA rings support.
>
> Peter Ujfalusi (17):
> dmaengine: ti: k3-udma: Correct normal channel offset when uchan_cnt
> is not 0
> dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
> dmaengine: ti: k3-udma: Add support for second resource range from
> sysfw
> dmaengine: ti: k3-udma-glue: Add function to get device pointer for
> DMA API
> dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
> dmaengine: of-dma: Add support for optional router configuration
> callback
> dmaengine: Add support for per channel coherency handling
> dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
> dmaengine: dmatest: Use dmaengine_get_dma_device
> dt-bindings: dma: ti: Add document for K3 BCDMA
> dt-bindings: dma: ti: Add document for K3 PKTDMA
> dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
> dmaengine: ti: k3-psil: Add initial map for AM64
> dmaengine: ti: Add support for k3 event routers
> dmaengine: ti: k3-udma: Initial support for K3 BCDMA
> dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
> dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
>
> Vignesh Raghavendra (1):
> dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
>
> .../devicetree/bindings/dma/ti/k3-bcdma.yaml | 175 ++
> .../devicetree/bindings/dma/ti/k3-pktdma.yaml | 183 ++
> Documentation/driver-api/dmaengine/client.rst | 4 +-
> drivers/dma/dmatest.c | 13 +-
> drivers/dma/of-dma.c | 10 +
> drivers/dma/ti/Makefile | 3 +-
> drivers/dma/ti/k3-psil-am64.c | 75 +
> drivers/dma/ti/k3-psil-priv.h | 1 +
> drivers/dma/ti/k3-psil.c | 1 +
> drivers/dma/ti/k3-udma-glue.c | 294 ++-
> drivers/dma/ti/k3-udma-private.c | 39 +
> drivers/dma/ti/k3-udma.c | 1968 +++++++++++++++--
> drivers/dma/ti/k3-udma.h | 27 +-
> drivers/soc/ti/k3-ringacc.c | 325 ++-
> include/linux/dma/k3-event-router.h | 16 +
> include/linux/dma/k3-psil.h | 16 +
> include/linux/dma/k3-udma-glue.h | 12 +
> include/linux/dmaengine.h | 14 +
> include/linux/soc/ti/k3-ringacc.h | 17 +
> 19 files changed, 2973 insertions(+), 220 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
> create mode 100644 drivers/dma/ti/k3-psil-am64.c
> create mode 100644 include/linux/dma/k3-event-router.h
>
> --
> Peter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

--
~Vinod

\
 
 \ /
  Last update: 2020-11-24 18:39    [W:0.116 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site