lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.9 216/252] serial: ar933x_uart: disable clk on error handling path in probe
Date
From: Zheng Zengkai <zhengzengkai@huawei.com>

commit 425af483523b76bc78e14674a430579d38b2a593 upstream.

ar933x_uart_probe() does not invoke clk_disable_unprepare()
on one error handling path. This patch fixes that.

Fixes: 9be1064fe524 ("serial: ar933x_uart: add RS485 support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Link: https://lore.kernel.org/r/20201111124426.42638-1-zhengzengkai@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/tty/serial/ar933x_uart.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -789,8 +789,10 @@ static int ar933x_uart_probe(struct plat
goto err_disable_clk;

up->gpios = mctrl_gpio_init(port, 0);
- if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS)
- return PTR_ERR(up->gpios);
+ if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS) {
+ ret = PTR_ERR(up->gpios);
+ goto err_disable_clk;
+ }

up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS);


\
 
 \ /
  Last update: 2020-11-23 14:09    [W:0.959 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site