lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] RISC-V: Update l2 cache DT documentation to add support for SiFive FU740
Date
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 21 November 2020 18:25
> To: Yash Shah <yash.shah@openfive.com>
> Cc: Paul Walmsley ( Sifive) <paul.walmsley@sifive.com>;
> palmer@dabbelt.com; aou@eecs.berkeley.edu;
> Jonathan.Cameron@huawei.com; wsa@kernel.org; sam@ravnborg.org;
> Sagar Kadam <sagar.kadam@openfive.com>; anup@brainfault.org;
> bp@suse.de; devicetree@vger.kernel.org; linux-riscv@lists.infradead.org;
> linux-kernel@vger.kernel.org; Sachin Ghadi <sachin.ghadi@openfive.com>
> Subject: Re: [PATCH 1/2] RISC-V: Update l2 cache DT documentation to add
> support for SiFive FU740
>
> [External Email] Do not click links or attachments unless you recognize the
> sender and know the content is safe
>
> On Thu, Nov 12, 2020 at 02:41:13PM +0530, Yash Shah wrote:
> > The L2 cache controller in SiFive FU740 has 4 ECC interrupt sources as
> > compared to 3 in FU540. Update the DT documentation accordingly with
> > "compatible" and "interrupt" property changes.
> >
> > Signed-off-by: Yash Shah <yash.shah@sifive.com>
> > ---
> > .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 33
> > +++++++++++++++++-----
> > 1 file changed, 26 insertions(+), 7 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> > b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> > index efc0198..4873d5c 100644
> > --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> > +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

<...>

> > @@ -51,12 +54,6 @@ properties:
> >
> > cache-unified: true
> >
> > - interrupts:
> > - description: |
> > - Must contain entries for DirError, DataError and DataFail signals.
> > - minItems: 3
> > - maxItems: 3
>
> Keep this here and just change maxItems to 4. Really, what each interrupt is
> should be listed out as an 'items' entry.
>

Sure will send a v2 with the above modifications.

<...>

>
> > +
> > +else:
> > + properties:
> > + interrupts:
> > + description: |
> > + Must contain entries for DirError, DirFail, DataError, DataFail signals.
>
> DirFail should be last so you keep the same indices.

Actually, the interrupts have been numbered like that in FU740 SoCs and the driver expects the interrupts to be in this order.
I will keep the same order for v2 as well. Let me know if you still disagree.

Thanks for your review.

- Yash


\
 
 \ /
  Last update: 2020-11-23 11:34    [W:0.057 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site