lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 20/25] coresight: etm4x: Detect system instructions support
On Mon, Nov 23, 2020 at 05:39:43PM +0800, Suzuki K Poulose wrote:
> On 11/23/20 7:58 AM, Tingwei Zhang wrote:
> >Hi Suzuki,
> >
> >On Fri, Nov 20, 2020 at 12:45:42AM +0800, Suzuki K Poulose wrote:
> >>ETM v4.4 onwards adds support for system instruction access
> >>to the ETM. Detect the support on an ETM and switch to using the
> >>mode when available.
> >>
> >>Cc: Mike Leach <mike.leach@linaro.org>
> >>Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> >>Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> >>---
> >> .../coresight/coresight-etm4x-core.c | 39 +++++++++++++++++++
> >> 1 file changed, 39 insertions(+)
> >>
> >>diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> >>b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> >>index 7ac0a185c146..5cbea9c27f58 100644
> >>--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> >>+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> >>@@ -684,6 +684,37 @@ static const struct coresight_ops etm4_cs_ops = {
> >> .source_ops = &etm4_source_ops,
> >> };
> >>
> >>+static inline bool cpu_supports_sysreg_trace(void)
> >>+{
> >>+ u64 dfr0 = read_sysreg_s(SYS_ID_AA64DFR0_EL1);
> >>+
> >>+ return ((dfr0 >> ID_AA64DFR0_TRACEVER_SHIFT) & 0xfUL) > 0;
> >>+}
> >>+
> >>+static bool etm4_init_sysreg_access(struct etmv4_drvdata *drvdata,
> >>+ struct csdev_access *csa)
> >>+{
> >>+ u32 devarch;
> >>+
> >>+ if (!cpu_supports_sysreg_trace())
> >>+ return false;
> >>+
> >>+ /*
> >>+ * ETMs implementing sysreg access must implement TRCDEVARCH.
> >>+ */
> >>+ devarch = read_etm4x_sysreg_const_offset(TRCDEVARCH);
> >>+ if ((devarch & ETM_DEVARCH_ID_MASK) != ETM_DEVARCH_ETMv4x_ARCH)
> >
> >Is this driver suppose to work on ETM 5.0/ETE trace unit before ETE driver
> >is ready?
>
> No, it is not supposed to work on an ETE without the ETE support. That check
> ensures that we only detect ETMv4x for now. The ETE driver support adds the
> ETE_ARCH as one of the supported ETMs. If you hack around it might still
> probe,
> but things could go terribly wrong if we access registers that are not
> available
> on ETE.
>
> Btw, are you able to test this series on an ETMv4.4+ system ?
>
I'm trying to test this series on an ETE. Look like it's not correct.
I'll apply ETE patch on top of this and test.

> Kind regards
> Suzuki
> _______________________________________________
> CoreSight mailing list
> CoreSight@lists.linaro.org
> https://lists.linaro.org/mailman/listinfo/coresight

\
 
 \ /
  Last update: 2020-11-24 01:43    [W:1.147 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site