lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] kfence: Avoid stalling work queue task without allocations
On Mon, 23 Nov 2020 11:28:12 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:

> I noticed:
>
>
> [ 237.650900] enabling event benchmark_event
>
> In both traces. Could you disable CONFIG_TRACEPOINT_BENCHMARK and see if
> the issue goes away. That event kicks off a thread that spins in a tight
> loop for some time and could possibly cause some issues.
>
> It still shouldn't break things, we can narrow it down if it is the culprit.

[ Added Thomas ]

And that's just one issue. I don't think that has anything to do with the
other one:

[ 1614.162007] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 1614.168625] (detected by 0, t=3752 jiffies, g=3529, q=1)
[ 1614.170825] rcu: All QSes seen, last rcu_preempt kthread activity 242 (4295293115-4295292873), jiffies_till_next_fqs=1, root ->qsmask 0x0
[ 1614.194272]
[ 1614.196673] ================================
[ 1614.199738] WARNING: inconsistent lock state
[ 1614.203056] 5.10.0-rc4-next-20201119-00004-g77838ee21ff6-dirty #21 Not tainted
[ 1614.207012] --------------------------------
[ 1614.210125] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 1614.213832] swapper/0/1 [HC0[0]:SC0[0]:HE0:SE1] takes:
[ 1614.217288] ffffd942547f47d8 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x7c0/0x17a0
[ 1614.225496] {IN-HARDIRQ-W} state was registered at:
[ 1614.229031] __lock_acquire+0xae8/0x1ac8
[ 1614.232203] lock_acquire+0x268/0x508
[ 1614.235254] _raw_spin_lock_irqsave+0x78/0x14c
[ 1614.238547] rcu_sched_clock_irq+0x7c0/0x17a0
[ 1614.241757] update_process_times+0x6c/0xb8
[ 1614.244950] tick_sched_handle.isra.0+0x58/0x88
[ 1614.248225] tick_sched_timer+0x68/0xe0
[ 1614.251304] __hrtimer_run_queues+0x288/0x730
[ 1614.254516] hrtimer_interrupt+0x114/0x288
[ 1614.257650] arch_timer_handler_virt+0x50/0x70
[ 1614.260922] handle_percpu_devid_irq+0x104/0x4c0
[ 1614.264236] generic_handle_irq+0x54/0x78
[ 1614.267385] __handle_domain_irq+0xac/0x130
[ 1614.270585] gic_handle_irq+0x70/0x108
[ 1614.273633] el1_irq+0xc0/0x180
[ 1614.276526] rcu_irq_exit_irqson+0x40/0x78
[ 1614.279704] trace_preempt_on+0x144/0x1a0
[ 1614.282834] preempt_schedule_common+0xf8/0x1a8
[ 1614.286126] preempt_schedule+0x38/0x40
[ 1614.289240] __mutex_lock+0x608/0x8e8
[ 1614.292302] mutex_lock_nested+0x3c/0x58
[ 1614.295450] static_key_enable_cpuslocked+0x7c/0xf8
[ 1614.298828] static_key_enable+0x2c/0x40
[ 1614.301961] tracepoint_probe_register_prio+0x284/0x3a0
[ 1614.305464] tracepoint_probe_register+0x40/0x58
[ 1614.308776] trace_event_reg+0xe8/0x150
[ 1614.311852] __ftrace_event_enable_disable+0x2e8/0x608
[ 1614.315351] __ftrace_set_clr_event_nolock+0x160/0x1d8
[ 1614.318809] __ftrace_set_clr_event+0x60/0x90
[ 1614.322061] event_trace_self_tests+0x64/0x12c
[ 1614.325335] event_trace_self_tests_init+0x88/0xa8
[ 1614.328758] do_one_initcall+0xa4/0x500
[ 1614.331860] kernel_init_freeable+0x344/0x3c4
[ 1614.335110] kernel_init+0x20/0x16c
[ 1614.338102] ret_from_fork+0x10/0x34
[ 1614.341057] irq event stamp: 3206302
[ 1614.344123] hardirqs last enabled at (3206301): [<ffffd9425238da04>] rcu_irq_exit_irqson+0x64/0x78
[ 1614.348697] hardirqs last disabled at (3206302): [<ffffd942522123c0>] el1_irq+0x80/0x180
[ 1614.353013] softirqs last enabled at (3204216): [<ffffd94252210b80>] __do_softirq+0x630/0x6b4
[ 1614.357509] softirqs last disabled at (3204191): [<ffffd942522c623c>] irq_exit+0x1cc/0x1e0
[ 1614.361737]
[ 1614.361737] other info that might help us debug this:
[ 1614.365566] Possible unsafe locking scenario:
[ 1614.365566]
[ 1614.369128] CPU0
[ 1614.371747] ----
[ 1614.374282] lock(rcu_node_0);
[ 1614.378818] <Interrupt>
[ 1614.381394] lock(rcu_node_0);
[ 1614.385997]
[ 1614.385997] *** DEADLOCK ***
[ 1614.385997]
[ 1614.389613] 5 locks held by swapper/0/1:
[ 1614.392655] #0: ffffd9425480e940 (event_mutex){+.+.}-{3:3}, at: __ftrace_set_clr_event+0x48/0x90
[ 1614.401701] #1: ffffd9425480a530 (tracepoints_mutex){+.+.}-{3:3}, at: tracepoint_probe_register_prio+0x48/0x3a0
[ 1614.410973] #2: ffffd9425476abf0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x24/0x40
[ 1614.419858] #3: ffffd94254816348 (jump_label_mutex){+.+.}-{3:3}, at: static_key_enable_cpuslocked+0x7c/0xf8
[ 1614.429049] #4: ffffd942547f47d8 (rcu_node_0){?.-.}-{2:2}, at: rcu_sched_clock_irq+0x7c0/0x17a0
[ 1614.438029]
[ 1614.438029] stack backtrace:
[ 1614.441436] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00004-g77838ee21ff6-dirty #21
[ 1614.446149] Hardware name: linux,dummy-virt (DT)
[ 1614.449621] Call trace:
[ 1614.452337] dump_backtrace+0x0/0x240
[ 1614.455372] show_stack+0x34/0x88
[ 1614.458306] dump_stack+0x140/0x1bc
[ 1614.461258] print_usage_bug+0x2a0/0x2f0
[ 1614.464399] mark_lock.part.0+0x438/0x4e8
[ 1614.467528] mark_held_locks+0x54/0x90
[ 1614.470576] lockdep_hardirqs_on_prepare+0xe0/0x290
[ 1614.473935] trace_hardirqs_on+0x90/0x370
[ 1614.477045] el1_irq+0xdc/0x180
[ 1614.479934] rcu_irq_exit_irqson+0x40/0x78
[ 1614.483093] trace_preempt_on+0x144/0x1a0
[ 1614.486211] preempt_schedule_common+0xf8/0x1a8
[ 1614.489479] preempt_schedule+0x38/0x40
[ 1614.492544] __mutex_lock+0x608/0x8e8


The above has:

preempt_schedule_common() {
trace_preempt_on() {
<interrupt>
el1_irq:
handle_arch_irq {
irq_enter();
[..]
irq_exit();
}
bl trace_hardirqs_on


I wonder if the lockdep logic got confused on ARM64 by the rework done to
lockdep and tracing with respect to irq entry / exit.

Or maybe there's an rcu_node leak lock that happened somewhere?

-- Steve

\
 
 \ /
  Last update: 2020-11-23 20:10    [W:0.122 / U:3.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site