lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 05/15] net: phy: meson-gxl: implement generic .handle_interrupt() callback
Date
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.

Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
drivers/net/phy/meson-gxl.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index e8f2ca625837..b16b1cc89165 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -222,6 +222,24 @@ static int meson_gxl_config_intr(struct phy_device *phydev)
return phy_write(phydev, INTSRC_MASK, val);
}

+static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, INTSRC_FLAG);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (irq_status == 0)
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver meson_gxl_phy[] = {
{
PHY_ID_MATCH_EXACT(0x01814400),
@@ -233,6 +251,7 @@ static struct phy_driver meson_gxl_phy[] = {
.read_status = meson_gxl_read_status,
.ack_interrupt = meson_gxl_ack_interrupt,
.config_intr = meson_gxl_config_intr,
+ .handle_interrupt = meson_gxl_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -243,6 +262,7 @@ static struct phy_driver meson_gxl_phy[] = {
.soft_reset = genphy_soft_reset,
.ack_interrupt = meson_gxl_ack_interrupt,
.config_intr = meson_gxl_config_intr,
+ .handle_interrupt = meson_gxl_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
--
2.28.0
\
 
 \ /
  Last update: 2020-11-23 16:40    [W:0.099 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site