lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
On Thu, Nov 12, 2020 at 12:56 PM Jim Quinlan <james.quinlan@broadcom.com> wrote:
>
> In normal use of smc/hvc transport in SCMI the message completion is
> indicated by the return of the SMC call. This commit provides for an
> optional interrupt named "message-serviced" which is used instead to
> indicate the completion of a message.
>
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> ---
> Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
> index 55deb68230eb..7cdad11f40b1 100644
> --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
> +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
> @@ -31,6 +31,14 @@ Optional properties:
>
> - mbox-names: shall be "tx" or "rx" depending on mboxes entries.
>
> +- interrupts : when using smc or hvc transports, this optional
> + property indicates that msg completion by the platform is indicated
> + by an interrupt rather than by the return of the smc call. This
> + should not be used except when the platform requires such behavior.
> +
> +- interrupt-names : if "interrupts" is present, interrupt-names must also
> + be present and have the value "message-serviced".
> +
> See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
> about the generic mailbox controller and client driver bindings.
Hi Rob,

Are you okay with this commit?

Regards,
Jim Quinlan
Broadcom STB
>
> --
> 2.17.1
>
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2020-11-20 18:21    [W:0.064 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site