lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next: stall warnings and deadlock on Arm64 (was: [PATCH] kfence: Avoid stalling...)
On Fri, Nov 20, 2020 at 10:30AM +0000, Mark Rutland wrote:
> On Thu, Nov 19, 2020 at 10:53:53PM +0000, Will Deacon wrote:
> > On Thu, Nov 19, 2020 at 01:35:12PM -0800, Paul E. McKenney wrote:
> > > On Thu, Nov 19, 2020 at 08:38:19PM +0100, Marco Elver wrote:
> > > > On Thu, Nov 19, 2020 at 10:48AM -0800, Paul E. McKenney wrote:
> > > > > On Thu, Nov 19, 2020 at 06:02:59PM +0100, Marco Elver wrote:
> > >
> > > [ . . . ]
> > >
> > > > > > I can try bisection again, or reverting some commits that might be
> > > > > > suspicious? But we'd need some selection of suspicious commits.
> > > > >
> > > > > The report claims that one of the rcu_node ->lock fields is held
> > > > > with interrupts enabled, which would indeed be bad. Except that all
> > > > > of the stack traces that it shows have these locks held within the
> > > > > scheduling-clock interrupt handler. Now with the "rcu: Don't invoke
> > > > > try_invoke_on_locked_down_task() with irqs disabled" but without the
> > > > > "sched/core: Allow try_invoke_on_locked_down_task() with irqs disabled"
> > > > > commit, I understand why. With both, I don't see how this happens.
> > > >
> > > > I'm at a loss, but happy to keep bisecting and trying patches. I'm also
> > > > considering:
> > > >
> > > > Is it the compiler? Probably not, I tried 2 versions of GCC.
> > > >
> > > > Can we trust lockdep to precisely know IRQ state? I know there's
> > > > been some recent work around this, but hopefully we're not
> > > > affected here?
> > > >
> > > > Is QEMU buggy?
> > > >
> > > > > At this point, I am reduced to adding lockdep_assert_irqs_disabled()
> > > > > calls at various points in that code, as shown in the patch below.
> > > > >
> > > > > At this point, I would guess that your first priority would be the
> > > > > initial bug rather than this following issue, but you never know, this
> > > > > might well help diagnose the initial bug.
> > > >
> > > > I don't mind either way. I'm worried deadlocking the whole system might
> > > > be worse.
> > >
> > > Here is another set of lockdep_assert_irqs_disabled() calls on the
> > > off-chance that they actually find something.
> >
> > FWIW, arm64 is known broken wrt lockdep and irq tracing atm. Mark has been
> > looking at that and I think he is close to having something workable.
> >
> > Mark -- is there anything Marco and Paul can try out?
>
> I initially traced some issues back to commit:
>
> 044d0d6de9f50192 ("lockdep: Only trace IRQ edges")
>
> ... and that change of semantic could cause us to miss edges in some
> cases, but IIUC mostly where we haven't done the right thing in
> exception entry/return.
>
> I don't think my patches address this case yet, but my WIP (currently
> just fixing user<->kernel transitions) is at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git/log/?h=arm64/irq-fixes
>
> I'm looking into the kernel<->kernel transitions now, and I know that we
> mess up RCU management for a small window around arch_cpu_idle, but it's
> not immediately clear to me if either of those cases could cause this
> report.

Thank you -- I tried your irq-fixes, however that didn't seem to fix the
problem (still get warnings and then a panic). :-/

| [ 118.375217] Testing all events: OK
| [ 174.878839] Running tests again, along with the function tracer
| [ 174.894781] Running tests on all trace events:
| [ 174.906734] Testing all events:
| [ 176.204533] hrtimer: interrupt took 9035008 ns
| [ 286.788330] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 10s!
| [ 286.883216] Showing busy workqueues and worker pools:
| [ 286.899647] workqueue events: flags=0x0
| [ 286.920606] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
| [ 286.933010] pending: vmstat_shepherd
| [ 644.323445] INFO: task kworker/u2:1:107 blocked for more than 12 seconds.
| [ 649.448126] Not tainted 5.10.0-rc4-next-20201119-00004-g77838ee21ff6-dirty #17
| [ 656.619598] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
| [ 660.623500] task:kworker/u2:1 state:R stack: 0 pid: 107 ppid: 2 flags:0x00000428
| [ 671.587980] Call trace:
| [ 674.885884] __switch_to+0x148/0x1f0
| [ 675.267490] __schedule+0x2dc/0x9a8
| [ 677.748050] schedule+0x4c/0x100
| [ 679.223880] worker_thread+0xe8/0x510
| [ 680.663844] kthread+0x13c/0x188
| [ 681.663992] ret_from_fork+0x10/0x34
| [ 684.493389]
| [ 684.493389] Showing all locks held in the system:
| [ 688.554449] 4 locks held by swapper/0/1:
| [ 691.747079] 1 lock held by khungtaskd/23:
| [ 692.525727] #0: ffffa1ebd7ff1420 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x34/0x198
| [ 704.403177]
| [ 704.630928] =============================================
| [ 704.630928]
| [ 706.168072] Kernel panic - not syncing: hung_task: blocked tasks
| [ 706.172894] CPU: 0 PID: 23 Comm: khungtaskd Not tainted 5.10.0-rc4-next-20201119-00004-g77838ee21ff6-dirty #17
| [ 706.178507] Hardware name: linux,dummy-virt (DT)
| [ 706.182658] Call trace:
| [ 706.186231] dump_backtrace+0x0/0x240
| [ 706.190124] show_stack+0x34/0x88
| [ 706.193917] dump_stack+0x140/0x1bc
| [ 706.197728] panic+0x1e4/0x494
| [ 706.201440] watchdog+0x668/0xbe8
| [ 706.205238] kthread+0x13c/0x188
| [ 706.208991] ret_from_fork+0x10/0x34
| [ 706.214532] Kernel Offset: 0x21ebc5a00000 from 0xffff800010000000
| [ 706.219014] PHYS_OFFSET: 0xffffad8a80000000
| [ 706.223148] CPU features: 0x0240022,61806082
| [ 706.227149] Memory Limit: none
| [ 706.233359] ---[ end Kernel panic - not syncing: hung_task: blocked tasks ]---

Thanks,
-- Marco

\
 
 \ /
  Last update: 2020-11-20 15:05    [W:0.112 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site