lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/2] mmc: Support kmsg dumper based on pstore/blk
On Thu, 12 Nov 2020 at 07:24, Bhaskara Budiredla <bbudiredla@marvell.com> wrote:
>
> This patch introduces to mmcpstore. The functioning of mmcpstore is
> is similar to mtdpstore. mmcpstore works on FTL based flash devices
> whereas mtdpstore works on raw flash devices. When the system crashes,
> mmcpstore stores the kmsg panic and oops logs to a user specified
> MMC device.
>
> It collects the details about the host MMC device through pstore/blk
> "blkdev" parameter. The user can specify the MMC device in many ways
> by checking in Documentation/admin-guide/pstore-blk.rst.
>
> The individual mmc host drivers have to define suitable polling
> subroutines to write kmsg panic/oops logs through mmcpstore.

I don't like that changes to host drivers are needed to support this,
but perhaps there is no other good way!?

>
> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com>
> ---
> drivers/mmc/core/Kconfig | 7 +
> drivers/mmc/core/Makefile | 1 +
> drivers/mmc/core/block.c | 20 +++
> drivers/mmc/core/block.h | 3 +
> drivers/mmc/core/core.c | 24 +++
> drivers/mmc/core/mmcpstore.c | 318 +++++++++++++++++++++++++++++++++++
> include/linux/mmc/card.h | 4 +
> include/linux/mmc/core.h | 4 +
> include/linux/mmc/host.h | 6 +
> 9 files changed, 387 insertions(+)
> create mode 100644 drivers/mmc/core/mmcpstore.c
>
> diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
> index c12fe13e4b14..cafb367c482d 100644
> --- a/drivers/mmc/core/Kconfig
> +++ b/drivers/mmc/core/Kconfig
> @@ -81,3 +81,10 @@ config MMC_TEST
> This driver is only of interest to those developing or
> testing a host driver. Most people should say N here.
>
> +config MMC_PSTORE
> + bool "Log panic/oops to a MMC buffer"
> + depends on PSTORE
> + depends on PSTORE_BLK
> + help
> + Backend driver to store the kmsg crash dumps to a user specified MMC
> + device. The driver is based on pstore/blk.
> diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
> index 95ffe008ebdf..5f4230b79ac6 100644
> --- a/drivers/mmc/core/Makefile
> +++ b/drivers/mmc/core/Makefile
> @@ -17,4 +17,5 @@ mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
> obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
> mmc_block-objs := block.o queue.o
> obj-$(CONFIG_MMC_TEST) += mmc_test.o
> +obj-$(CONFIG_MMC_PSTORE) += mmcpstore.o
> obj-$(CONFIG_SDIO_UART) += sdio_uart.o
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> index 8d3df0be0355..f11c21d60b67 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -2870,6 +2870,21 @@ static void mmc_blk_remove_debugfs(struct mmc_card *card,
>
> #endif /* CONFIG_DEBUG_FS */
>
> +#ifdef CONFIG_MMC_PSTORE
> +sector_t mmc_blk_get_part(struct mmc_card *card, int part_num, sector_t *size)
> +{
> + struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
> + struct gendisk *disk = md->disk;
> + struct disk_part_tbl *part_tbl = disk->part_tbl;
> +
> + if (part_num < 0 || part_num >= part_tbl->len)
> + return 0;
> +
> + *size = part_tbl->part[part_num]->nr_sects << SECTOR_SHIFT;
> + return part_tbl->part[part_num]->start_sect;
> +}
> +#endif
> +
> static int mmc_blk_probe(struct mmc_card *card)
> {
> struct mmc_blk_data *md, *part_md;
> @@ -2913,6 +2928,11 @@ static int mmc_blk_probe(struct mmc_card *card)
> goto out;
> }
>
> +#ifdef CONFIG_MMC_PSTORE

Avoid using ifdefs in common functions like these, please. I think
it's more clean to add a stub function and then just call it
unconditionally here.

> + if (mmc_card_mmc(card) || mmc_card_sd(card))
> + mmcpstore_card_set(card, md->disk->disk_name);
> +#endif
> +
> /* Add two debugfs entries */
> mmc_blk_add_debugfs(card, md);
>
> diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h
> index 31153f656f41..2a2b81635508 100644
> --- a/drivers/mmc/core/block.h
> +++ b/drivers/mmc/core/block.h
> @@ -16,5 +16,8 @@ void mmc_blk_mq_recovery(struct mmc_queue *mq);
> struct work_struct;
>
> void mmc_blk_mq_complete_work(struct work_struct *work);
> +#ifdef CONFIG_MMC_PSTORE
> +sector_t mmc_blk_get_part(struct mmc_card *card, int part_num, sector_t *size);
> +#endif
>
> #endif
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index d42037f0f10d..7cc3d81f6a9a 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -569,6 +569,30 @@ int mmc_cqe_recovery(struct mmc_host *host)
> }
> EXPORT_SYMBOL(mmc_cqe_recovery);
>
> +
> +#ifdef CONFIG_MMC_PSTORE
> +/**
> + * mmc_wait_for_pstore_req - initiate a blocking mmc request
> + * @host: MMC host to start command
> + * @mrq: MMC request to start
> + *
> + * Start a new MMC custom command request for a host, and
> + * wait for the command to complete based on request data timeout.
> + */
> +void mmc_wait_for_pstore_req(struct mmc_host *host, struct mmc_request *mrq)
> +{
> + unsigned int timeout;
> +
> + host->ops->req_cleanup_pending(host);
> + mmc_start_request(host, mrq);
> +
> + if (mrq->data) {
> + timeout = mrq->data->timeout_ns / NSEC_PER_MSEC;
> + host->ops->req_completion_poll(host, timeout);
> + }
> +}

As I said above, I would like to avoid host specific deployments from
being needed. Is there a way we can avoid this?

> +#endif
> +
> /**
> * mmc_is_req_done - Determine if a 'cap_cmd_during_tfr' request is done
> * @host: MMC host
> diff --git a/drivers/mmc/core/mmcpstore.c b/drivers/mmc/core/mmcpstore.c
> new file mode 100644
> index 000000000000..ffa44c859e10
> --- /dev/null
> +++ b/drivers/mmc/core/mmcpstore.c
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pstore_blk.h>
> +#include <linux/blkdev.h>
> +#include <linux/mount.h>
> +#include <linux/slab.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
> +#include <linux/scatterlist.h>
> +#include "block.h"
> +#include "card.h"
> +#include "core.h"
> +
> +static struct mmcpstore_context {
> + char dev_name[BDEVNAME_SIZE];
> + int partno;
> + sector_t start_sect;
> + sector_t size;
> + struct pstore_device_info dev;
> + struct pstore_blk_config conf;
> + struct pstore_blk_info info;
> +
> + char *sub;
> + struct mmc_card *card;
> + struct mmc_request *mrq;
> +} oops_cxt;
> +
> +static void mmc_prep_req(struct mmc_request *mrq,
> + unsigned int sect_offset, unsigned int nsects,
> + struct scatterlist *sg, u32 opcode, unsigned int flags)
> +{
> + mrq->cmd->opcode = opcode;
> + mrq->cmd->arg = sect_offset;
> + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
> +
> + if (nsects == 1) {
> + mrq->stop = NULL;
> + } else {
> + mrq->stop->opcode = MMC_STOP_TRANSMISSION;
> + mrq->stop->arg = 0;
> + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
> + }
> +
> + mrq->data->blksz = SECTOR_SIZE;
> + mrq->data->blocks = nsects;
> + mrq->data->flags = flags;
> + mrq->data->sg = sg;
> + mrq->data->sg_len = 1;
> +}
> +
> +static int mmcpstore_rdwr_req(const char *buf, unsigned int nsects,
> + unsigned int sect_offset, unsigned int flags)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + struct mmc_request *mrq = cxt->mrq;
> + struct mmc_card *card = cxt->card;
> + struct mmc_host *host = card->host;
> + struct scatterlist sg;
> + u32 opcode;
> +
> + if (flags == MMC_DATA_READ)
> + opcode = (nsects > 1) ?
> + MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
> + else
> + opcode = (nsects > 1) ?
> + MMC_WRITE_MULTIPLE_BLOCK : MMC_WRITE_BLOCK;
> +
> + mmc_prep_req(mrq, sect_offset, nsects, &sg, opcode, flags);
> + sg_init_one(&sg, buf, (nsects << SECTOR_SHIFT));
> + mmc_set_data_timeout(mrq->data, cxt->card);
> +
> + mmc_claim_host(host);
> + mmc_wait_for_req(host, mrq);
> + mdelay(mrq->data->timeout_ns / NSEC_PER_MSEC);
> + mmc_release_host(host);
> +
> + if (mrq->cmd->error) {
> + pr_err("Cmd error: %d\n", mrq->cmd->error);
> + return mrq->cmd->error;
> + }
> + if (mrq->data->error) {
> + pr_err("Data error: %d\n", mrq->data->error);
> + return mrq->data->error;
> + }
> +
> + return 0;
> +}
> +
> +static ssize_t mmcpstore_write(const char *buf, size_t size, loff_t off)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + int ret;
> +
> + ret = mmcpstore_rdwr_req(buf, (size >> SECTOR_SHIFT),
> + cxt->start_sect + (off >> SECTOR_SHIFT), MMC_DATA_WRITE);
> + if (ret)
> + return ret;
> +
> + return size;
> +}
> +
> +static ssize_t mmcpstore_read(char *buf, size_t size, loff_t off)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + unsigned int sect_off = cxt->start_sect + (off >> SECTOR_SHIFT);
> + unsigned long sects = (cxt->conf.kmsg_size >> SECTOR_SHIFT);
> + int ret;
> +
> + if (unlikely(!buf || !size))
> + return -EINVAL;
> +
> + ret = mmcpstore_rdwr_req(cxt->sub, sects, sect_off, MMC_DATA_READ);
> + if (ret)
> + return ret;
> + memcpy(buf, cxt->sub, size);
> +
> + return size;
> +}
> +
> +static void mmcpstore_panic_write_req(const char *buf,
> + unsigned int nsects, unsigned int sect_offset)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + struct mmc_request *mrq = cxt->mrq;
> + struct mmc_card *card = cxt->card;
> + struct mmc_host *host = card->host;
> + struct scatterlist sg;
> + u32 opcode;
> +
> + opcode = (nsects > 1) ? MMC_WRITE_MULTIPLE_BLOCK : MMC_WRITE_BLOCK;
> + mmc_prep_req(mrq, sect_offset, nsects, &sg, opcode, MMC_DATA_WRITE);
> + sg_init_one(&sg, buf, (nsects << SECTOR_SHIFT));
> + mmc_set_data_timeout(mrq->data, cxt->card);
> +
> + mmc_claim_host(host);
> + mmc_wait_for_pstore_req(host, mrq);
> + mmc_release_host(card->host);
> +}
> +
> +static ssize_t mmcpstore_panic_write(const char *buf, size_t size, loff_t off)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> +
> + mmcpstore_panic_write_req(buf, (size >> SECTOR_SHIFT),
> + cxt->start_sect + (off >> SECTOR_SHIFT));
> + return size;
> +}
> +
> +static struct block_device *mmcpstore_open_backend(const char *device)
> +{
> + struct block_device *bdev;
> + dev_t devt;
> +
> + bdev = blkdev_get_by_path(device, FMODE_READ, NULL);
> + if (IS_ERR(bdev)) {
> + devt = name_to_dev_t(device);
> + if (devt == 0)
> + return ERR_PTR(-ENODEV);
> +
> + bdev = blkdev_get_by_dev(devt, FMODE_READ, NULL);
> + if (IS_ERR(bdev))
> + return bdev;
> + }
> +
> + return bdev;
> +}
> +
> +static void mmcpstore_close_backend(struct block_device *bdev)
> +{
> + if (!bdev)
> + return;
> + blkdev_put(bdev, FMODE_READ);
> +}
> +
> +void mmcpstore_card_set(struct mmc_card *card, const char *disk_name)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + struct pstore_blk_config *conf = &cxt->conf;
> + struct pstore_device_info *dev = &cxt->dev;
> + struct block_device *bdev;
> + struct mmc_command *stop;
> + struct mmc_command *cmd;
> + struct mmc_request *mrq;
> + struct mmc_data *data;
> + int ret;
> +
> + if (!conf->device[0])
> + return;
> +
> + /* Multiple backend devices not allowed */
> + if (cxt->dev_name[0])
> + return;
> +
> + bdev = mmcpstore_open_backend(conf->device);
> + if (IS_ERR(bdev)) {
> + pr_err("%s failed to open with %ld\n",
> + conf->device, PTR_ERR(bdev));
> + return;
> + }
> +
> + bdevname(bdev, cxt->dev_name);
> + cxt->partno = bdev->bd_part->partno;
> + mmcpstore_close_backend(bdev);
> +
> + if (strncmp(cxt->dev_name, disk_name, strlen(disk_name)))
> + return;
> +
> + cxt->start_sect = mmc_blk_get_part(card, cxt->partno, &cxt->size);
> + if (!cxt->start_sect) {
> + pr_err("Non-existent partition %d selected\n", cxt->partno);
> + return;
> + }
> +
> + /* Check for host mmc panic write polling function definitions */
> + if (!card->host->ops->req_cleanup_pending ||
> + !card->host->ops->req_completion_poll)
> + return;
> +
> + cxt->card = card;
> +
> + cxt->sub = kmalloc(conf->kmsg_size, GFP_KERNEL);
> + if (!cxt->sub)
> + goto out;
> +
> + mrq = kzalloc(sizeof(struct mmc_request), GFP_KERNEL);
> + if (!mrq)
> + goto free_sub;
> +
> + cmd = kzalloc(sizeof(struct mmc_command), GFP_KERNEL);
> + if (!cmd)
> + goto free_mrq;
> +
> + stop = kzalloc(sizeof(struct mmc_command), GFP_KERNEL);
> + if (!stop)
> + goto free_cmd;
> +
> + data = kzalloc(sizeof(struct mmc_data), GFP_KERNEL);
> + if (!data)
> + goto free_stop;
> +
> + mrq->cmd = cmd;
> + mrq->data = data;
> + mrq->stop = stop;
> + cxt->mrq = mrq;
> +
> + dev->total_size = cxt->size;
> + dev->flags = PSTORE_FLAGS_DMESG;
> + dev->read = mmcpstore_read;
> + dev->write = mmcpstore_write;
> + dev->erase = NULL;
> + dev->panic_write = mmcpstore_panic_write;
> +
> + ret = register_pstore_device(&cxt->dev);

By looking at all of the code above, lots are duplicated from the mmc
block device implementation. Isn't there a way to make the pstore
block device to push a request through the regular blk-mq path
instead?

That said, I wonder why you don't call register_pstore_blk(), as I
thought that was the interface to be used for regular block devices,
no?


> + if (ret) {
> + pr_err("%s registering with psblk failed (%d)\n",
> + cxt->dev_name, ret);
> + goto free_data;
> + }
> +
> + pr_info("%s registered as psblk backend\n", cxt->dev_name);
> + return;
> +
> +free_data:
> + kfree(data);
> +free_stop:
> + kfree(stop);
> +free_cmd:
> + kfree(cmd);
> +free_mrq:
> + kfree(mrq);
> +free_sub:
> + kfree(cxt->sub);
> +out:
> + return;
> +}
> +EXPORT_SYMBOL(mmcpstore_card_set);
> +
> +static int __init mmcpstore_init(void)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> + struct pstore_blk_config *conf = &cxt->conf;
> + int err;
> +
> + err = pstore_blk_get_config(conf);
> + if (unlikely(err))
> + return err;

Looks like that this can be moved to mmc_blk_probe() function instead.

> +
> + if (!conf->device[0]) {
> + pr_err("psblk backend is empty\n");
> + return -EINVAL;
> + }
> +
> + return err;
> +}
> +
> +static void __exit mmcpstore_exit(void)
> +{
> + struct mmcpstore_context *cxt = &oops_cxt;
> +
> + unregister_pstore_device(&cxt->dev);
> + kfree(cxt->mrq->data);
> + kfree(cxt->mrq->stop);
> + kfree(cxt->mrq->cmd);
> + kfree(cxt->mrq);
> + kfree(cxt->sub);
> + cxt->card = NULL;

Can we do this via mmc_blk_remove() instead?

> +}
> +
> +module_init(mmcpstore_init);
> +module_exit(mmcpstore_exit);
> +
> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@marvell.com>");
> +MODULE_DESCRIPTION("MMC backend for pstore/blk");
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 42df06c6b19c..76ae8ae61d31 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -322,6 +322,10 @@ static inline bool mmc_large_sector(struct mmc_card *card)
>
> bool mmc_card_is_blockaddr(struct mmc_card *card);
>
> +#ifdef CONFIG_MMC_PSTORE
> +void mmcpstore_card_set(struct mmc_card *card, const char *disk_name);
> +#endif /* CONFIG_MMC_PSTORE */
> +
> #define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
> #define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD)
> #define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO)
> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
> index 29aa50711626..21dcd79f8f0e 100644
> --- a/include/linux/mmc/core.h
> +++ b/include/linux/mmc/core.h
> @@ -166,6 +166,10 @@ struct mmc_request {
>
> struct mmc_card;
>
> +#ifdef CONFIG_MMC_PSTORE
> +extern void mmc_wait_for_pstore_req(struct mmc_host *, struct mmc_request *);
> +#endif /* CONFIG_MMC_PSTORE */
> +
> void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq);
> int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
> int retries);
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index c079b932330f..ef57313ee3ea 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -173,6 +173,12 @@ struct mmc_host_ops {
> */
> int (*multi_io_quirk)(struct mmc_card *card,
> unsigned int direction, int blk_size);
> +
> +#ifdef CONFIG_MMC_PSTORE
> + void (*req_cleanup_pending)(struct mmc_host *host);
> + int (*req_completion_poll)(struct mmc_host *host,
> + unsigned long timeout);

If these really will be needed, please add some comments about what
they are intended to help with.

> +#endif
> };
>
> struct mmc_cqe_ops {

Kind regards
Uffe

\
 
 \ /
  Last update: 2020-11-20 14:23    [W:0.085 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site