lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v3 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
On 16-11-20, 11:16, Neil Armstrong wrote:
> The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
> thus we need to have inclusive support for both interfaces at runtime.
>
> This fixes the regmap get from parent node, removes cell param
> to select a mode and implement runtime configuration & power on/off
> for both functions since they are not exclusive.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Reviewed-by: Remi Pommarel <repk@triplefau.lt>
> ---
> drivers/phy/amlogic/Kconfig | 1 +
> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------
> 2 files changed, 136 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index 99e8a4c7f1f3..db5d0cd757e3 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
> depends on OF && (ARCH_MESON || COMPILE_TEST)
> select GENERIC_PHY
> select REGMAP_MMIO
> + select GENERIC_PHY_MIPI_DPHY
> help
> Enable this to support the Meson MIPI + PCIE analog PHY
> found in Meson AXG SoCs.
> diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> index 1431cbf885e1..6eb21551bdd9 100644
> --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> @@ -4,9 +4,13 @@
> *
> * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
> */
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> #include <linux/module.h>
> #include <linux/phy/phy.h>
> #include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/platform_device.h>
> #include <dt-bindings/phy/phy.h>
>
> @@ -14,10 +18,10 @@
> #define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
> #define HHI_MIPI_CNTL0_ENABLE BIT(29)
> #define HHI_MIPI_CNTL0_BANDGAP BIT(26)
> -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
> -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16)
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
>
> -#define HHI_MIPI_CNTL1 0x01
> +#define HHI_MIPI_CNTL1 0x04
> #define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
> #define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
> #define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
> @@ -25,100 +29,170 @@
> #define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
> #define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
>
> -#define HHI_MIPI_CNTL2 0x02
> +#define HHI_MIPI_CNTL2 0x08
> #define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
> #define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
> #define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
> #define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
> #define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
> -#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
> +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
> #define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
>
> +#define DSI_LANE_0 (1 << 4)
> +#define DSI_LANE_1 (1 << 3)
> +#define DSI_LANE_CLK (1 << 2)
> +#define DSI_LANE_2 (1 << 1)
> +#define DSI_LANE_3 (1 << 0)
> +#define DSI_LANE_MASK (0x1F)

This should use BIT(), also there are interesting helpers in bitfield.h
to help with register fields, do send follow up patches..

--
~Vinod

\
 
 \ /
  Last update: 2020-11-20 11:00    [W:2.469 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site