Messages in this thread | | | Date | Fri, 20 Nov 2020 17:29:30 -0800 (PST) | Subject | Re: [PATCH v4 3/4] clk: sifive: Add a driver for the SiFive FU740 PRCI IP block | From | Palmer Dabbelt <> |
| |
On Wed, 11 Nov 2020 02:06:07 PST (-0800), zong.li@sifive.com wrote: > Add driver code for the SiFive FU740 PRCI IP block. This IP block > handles reset and clock control for the SiFive FU740 device and > implements SoC-level clock tree controls and dividers. > > This driver contains bug fixes and contributions from > Henry Styles <hes@sifive.com> > Erik Danie <erik.danie@sifive.com> > Pragnesh Patel <pragnesh.patel@sifive.com> > > Signed-off-by: Zong Li <zong.li@sifive.com> > Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> > Cc: Henry Styles <hes@sifive.com> > Cc: Erik Danie <erik.danie@sifive.com> > Cc: Pragnesh Patel <pragnesh.patel@sifive.com> > --- > drivers/clk/sifive/Kconfig | 4 +- > drivers/clk/sifive/Makefile | 1 + > drivers/clk/sifive/fu740-prci.c | 122 ++++++++++++++++++ > drivers/clk/sifive/fu740-prci.h | 21 +++ > drivers/clk/sifive/sifive-prci.c | 120 +++++++++++++++++ > drivers/clk/sifive/sifive-prci.h | 88 +++++++++++++ > include/dt-bindings/clock/sifive-fu740-prci.h | 23 ++++
I don't see the bindings in Documentation, but assuming they're in flight
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Thanks!
> 7 files changed, 377 insertions(+), 2 deletions(-) > create mode 100644 drivers/clk/sifive/fu740-prci.c > create mode 100644 drivers/clk/sifive/fu740-prci.h > create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h > > diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig > index ab48cf7e0105..1c14eb20c066 100644 > --- a/drivers/clk/sifive/Kconfig > +++ b/drivers/clk/sifive/Kconfig > @@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI > select CLK_ANALOGBITS_WRPLL_CLN28HPC > help > Supports the Power Reset Clock interface (PRCI) IP block found in > - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, > - enable this driver. > + FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/ > + FU740 SoCs, enable this driver. > > endif > diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile > index fe3e2cb4c4d8..2c05798e4ba4 100644 > --- a/drivers/clk/sifive/Makefile > +++ b/drivers/clk/sifive/Makefile > @@ -2,3 +2,4 @@ > obj-y += sifive-prci.o > > obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o > +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu740-prci.o > diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c > new file mode 100644 > index 000000000000..3b87e273c3eb > --- /dev/null > +++ b/drivers/clk/sifive/fu740-prci.c > @@ -0,0 +1,122 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018-2019 SiFive, Inc. > + * Wesley Terpstra > + * Paul Walmsley > + * Zong Li > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <dt-bindings/clock/sifive-fu740-prci.h> > +#include <linux/module.h> > +#include "sifive-prci.h" > + > +/* PRCI integration data for each WRPLL instance */ > + > +static struct __prci_wrpll_data __prci_corepll_data = { > + .cfg0_offs = PRCI_COREPLLCFG0_OFFSET, > + .enable_bypass = sifive_prci_coreclksel_use_hfclk, > + .disable_bypass = sifive_prci_coreclksel_use_final_corepll, > +}; > + > +static struct __prci_wrpll_data __prci_ddrpll_data = { > + .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET, > +}; > + > +static struct __prci_wrpll_data __prci_gemgxlpll_data = { > + .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, > +}; > + > +static struct __prci_wrpll_data __prci_dvfscorepll_data = { > + .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET, > + .enable_bypass = sifive_prci_corepllsel_use_corepll, > + .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll, > +}; > + > +static struct __prci_wrpll_data __prci_hfpclkpll_data = { > + .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET, > + .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk, > + .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll, > +}; > + > +static struct __prci_wrpll_data __prci_cltxpll_data = { > + .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET, > +}; > + > +/* Linux clock framework integration */ > + > +static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = { > + .set_rate = sifive_prci_wrpll_set_rate, > + .round_rate = sifive_prci_wrpll_round_rate, > + .recalc_rate = sifive_prci_wrpll_recalc_rate, > +}; > + > +static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = { > + .recalc_rate = sifive_prci_wrpll_recalc_rate, > +}; > + > +static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = { > + .recalc_rate = sifive_prci_tlclksel_recalc_rate, > +}; > + > +static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = { > + .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate, > +}; > + > +/* List of clock controls provided by the PRCI */ > +struct __prci_clock __prci_init_clocks_fu740[] = { > + [PRCI_CLK_COREPLL] = { > + .name = "corepll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_corepll_data, > + }, > + [PRCI_CLK_DDRPLL] = { > + .name = "ddrpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_ro_clk_ops, > + .pwd = &__prci_ddrpll_data, > + }, > + [PRCI_CLK_GEMGXLPLL] = { > + .name = "gemgxlpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_gemgxlpll_data, > + }, > + [PRCI_CLK_DVFSCOREPLL] = { > + .name = "dvfscorepll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_dvfscorepll_data, > + }, > + [PRCI_CLK_HFPCLKPLL] = { > + .name = "hfpclkpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_hfpclkpll_data, > + }, > + [PRCI_CLK_CLTXPLL] = { > + .name = "cltxpll", > + .parent_name = "hfclk", > + .ops = &sifive_fu740_prci_wrpll_clk_ops, > + .pwd = &__prci_cltxpll_data, > + }, > + [PRCI_CLK_TLCLK] = { > + .name = "tlclk", > + .parent_name = "corepll", > + .ops = &sifive_fu740_prci_tlclksel_clk_ops, > + }, > + [PRCI_CLK_PCLK] = { > + .name = "pclk", > + .parent_name = "hfpclkpll", > + .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops, > + }, > +}; > diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h > new file mode 100644 > index 000000000000..13ef971f7764 > --- /dev/null > +++ b/drivers/clk/sifive/fu740-prci.h > @@ -0,0 +1,21 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2020 SiFive, Inc. > + * Zong Li > + */ > + > +#ifndef __SIFIVE_CLK_FU740_PRCI_H > +#define __SIFIVE_CLK_FU740_PRCI_H > + > +#include "sifive-prci.h" > + > +#define NUM_CLOCK_FU740 8 > + > +extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740]; > + > +static const struct prci_clk_desc prci_clk_fu740 = { > + .clks = __prci_init_clocks_fu740, > + .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740), > +}; > + > +#endif /* __SIFIVE_CLK_FU740_PRCI_H */ > diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c > index 0ac729eeb71b..4098dbc5881a 100644 > --- a/drivers/clk/sifive/sifive-prci.c > +++ b/drivers/clk/sifive/sifive-prci.c > @@ -27,6 +27,7 @@ > #include <linux/of_device.h> > #include "sifive-prci.h" > #include "fu540-prci.h" > +#include "fu740-prci.h" > > /* > * Private functions > @@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw, > return div_u64(parent_rate, div); > } > > +/* HFPCLK clock integration */ > + > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct __prci_clock *pc = clk_hw_to_prci_clock(hw); > + struct __prci_data *pd = pc->pd; > + u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET); > + > + return div_u64(parent_rate, div + 2); > +} > + > /* > * Core clock mux control > */ > @@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd) > r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > } > > +/** > + * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output > + * FINAL_COREPLL > + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg > + * > + * Switch the CORECLK mux to the final COREPLL output clock; return once > + * complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_CORECLKSEL_OFFSET register. > + */ > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); > + r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; > + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to > + * output DVFS_COREPLL > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg > + * > + * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_COREPLLSEL_OFFSET register. > + */ > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); > + r |= PRCI_COREPLLSEL_COREPLLSEL_MASK; > + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to > + * output COREPLL > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg > + * > + * Switch the COREPLL mux to the COREPLL output clock; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_COREPLLSEL_OFFSET register. > + */ > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); > + r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK; > + __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to > + * output HFCLK > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg > + * > + * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_HFPCLKPLLSEL_OFFSET register. > + */ > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); > + r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; > + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ > +} > + > +/** > + * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to > + * output HFPCLKPLL > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg > + * > + * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete. > + * > + * Context: Any context. Caller must prevent concurrent changes to the > + * PRCI_HFPCLKPLLSEL_OFFSET register. > + */ > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) > +{ > + u32 r; > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); > + r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; > + __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); > + > + r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ > +} > + > /** > * __prci_register_clocks() - register clock controls in the PRCI > * @dev: Linux struct device * > @@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device *pdev) > > static const struct of_device_id sifive_prci_of_match[] = { > {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540}, > + {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740}, > {} > }; > > diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h > index 025f717bc053..802fc8fb9c09 100644 > --- a/drivers/clk/sifive/sifive-prci.h > +++ b/drivers/clk/sifive/sifive-prci.h > @@ -117,6 +117,87 @@ > #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \ > (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT) > > +/* CLTXPLLCFG0 */ > +#define PRCI_CLTXPLLCFG0_OFFSET 0x30 > +#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0 > +#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT) > +#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6 > +#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT) > +#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15 > +#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT) > +#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18 > +#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT) > +#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24 > +#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT) > +#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25 > +#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT) > +#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31 > +#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT) > + > +/* CLTXPLLCFG1 */ > +#define PRCI_CLTXPLLCFG1_OFFSET 0x34 > +#define PRCI_CLTXPLLCFG1_CKE_SHIFT 31 > +#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT) > + > +/* DVFSCOREPLLCFG0 */ > +#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38 > + > +/* DVFSCOREPLLCFG1 */ > +#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c > +#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 31 > +#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT) > + > +/* COREPLLSEL */ > +#define PRCI_COREPLLSEL_OFFSET 0x40 > +#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0 > +#define PRCI_COREPLLSEL_COREPLLSEL_MASK \ > + (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT) > + > +/* HFPCLKPLLCFG0 */ > +#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50 > +#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0 > +#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \ > + (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6 > +#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \ > + (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15 > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \ > + (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18 > +#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \ > + (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24 > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25 > +#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT) > +#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31 > +#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT) > + > +/* HFPCLKPLLCFG1 */ > +#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54 > +#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 31 > +#define PRCI_HFPCLKPLLCFG1_CKE_MASK \ > + (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT) > + > +/* HFPCLKPLLSEL */ > +#define PRCI_HFPCLKPLLSEL_OFFSET 0x58 > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0 > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \ > + (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT) > + > +/* HFPCLKPLLDIV */ > +#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c > + > +/* PRCIPLL */ > +#define PRCI_PRCIPLL_OFFSET 0xe0 > + > +/* PROCMONCFG */ > +#define PRCI_PROCMONCFG_OFFSET 0xf0 > + > /* > * Private structures > */ > @@ -187,6 +268,11 @@ struct prci_clk_desc { > /* Core clock mux control */ > void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd); > void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd); > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd); > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd); > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd); > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd); > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd); > > /* Linux clock framework integration */ > long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate, > @@ -197,5 +283,7 @@ unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate); > unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate); > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate); > > #endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */ > diff --git a/include/dt-bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h > new file mode 100644 > index 000000000000..cd7706ea5677 > --- /dev/null > +++ b/include/dt-bindings/clock/sifive-fu740-prci.h > @@ -0,0 +1,23 @@ > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ > +/* > + * Copyright (C) 2019 SiFive, Inc. > + * Wesley Terpstra > + * Paul Walmsley > + * Zong Li > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H > +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H > + > +/* Clock indexes for use by Device Tree data and the PRCI driver */ > + > +#define PRCI_CLK_COREPLL 0 > +#define PRCI_CLK_DDRPLL 1 > +#define PRCI_CLK_GEMGXLPLL 2 > +#define PRCI_CLK_DVFSCOREPLL 3 > +#define PRCI_CLK_HFPCLKPLL 4 > +#define PRCI_CLK_CLTXPLL 5 > +#define PRCI_CLK_TLCLK 6 > +#define PRCI_CLK_PCLK 7 > + > +#endif /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */
| |