lkml.org 
[lkml]   [2020]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] habanalabs: update firmware files
Date
Update various firmware header files with new defines.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
.../misc/habanalabs/include/common/hl_boot_if.h | 17 +++++++++++++++++
.../misc/habanalabs/include/gaudi/gaudi_fw_if.h | 3 ++-
.../misc/habanalabs/include/goya/goya_fw_if.h | 3 ++-
3 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index 68ac15c53f37..e5801ecf0cb2 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -56,6 +56,20 @@
* CPU_BOOT_ERR0_EFUSE_FAIL Reading from eFuse failed.
* The PCI device ID might be wrong.
*
+ * CPU_BOOT_ERR0_PRI_IMG_VER_FAIL Verification of primary image failed.
+ * It mean that ppboot checksum
+ * verification for the preboot primary
+ * image has failed to match expected
+ * checksum. Trying to program image again
+ * might solve this.
+ *
+ * CPU_BOOT_ERR0_SEC_IMG_VER_FAIL Verification of secondary image failed.
+ * It mean that ppboot checksum
+ * verification for the preboot secondary
+ * image has failed to match expected
+ * checksum. Trying to program image again
+ * might solve this.
+ *
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@@ -72,6 +86,8 @@
#define CPU_BOOT_ERR0_SECURITY_NOT_RDY (1 << 7)
#define CPU_BOOT_ERR0_SECURITY_FAIL (1 << 8)
#define CPU_BOOT_ERR0_EFUSE_FAIL (1 << 9)
+#define CPU_BOOT_ERR0_PRI_IMG_VER_FAIL (1 << 10)
+#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL (1 << 11)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)

/*
@@ -141,6 +157,7 @@
* bits are not garbage, but actual
* statuses.
* Initialized in: preboot
+ *
*/
#define CPU_BOOT_DEV_STS0_SECURITY_EN (1 << 0)
#define CPU_BOOT_DEV_STS0_DEBUG_EN (1 << 1)
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
index d61a4c87b765..25acd9e87e20 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
@@ -30,7 +30,8 @@ enum gaudi_pll_index {
MESH_PLL,
MME_PLL,
TPC_PLL,
- IF_PLL
+ IF_PLL,
+ PLL_MAX
};

enum gaudi_nic_axi_error {
diff --git a/drivers/misc/habanalabs/include/goya/goya_fw_if.h b/drivers/misc/habanalabs/include/goya/goya_fw_if.h
index 0fa80fe9f6cc..daf8d8cd14be 100644
--- a/drivers/misc/habanalabs/include/goya/goya_fw_if.h
+++ b/drivers/misc/habanalabs/include/goya/goya_fw_if.h
@@ -22,7 +22,8 @@ enum goya_pll_index {
MME_PLL,
PCI_PLL,
EMMC_PLL,
- TPC_PLL
+ TPC_PLL,
+ PLL_MAX
};

#define GOYA_PLL_FREQ_LOW 50000000 /* 50 MHz */
--
2.17.1
\
 
 \ /
  Last update: 2020-11-20 22:08    [W:0.020 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site