lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/4] drm/bridge: ti-sn65dsi86: Update reply on aux failures
Hi,

On Thu, Oct 29, 2020 at 6:17 PM Stephen Boyd <swboyd@chromium.org> wrote:
>
> We should be setting the drm_dp_aux_msg::reply field if a NACK or a
> SHORT reply happens. Update the error bit handling logic in
> ti_sn_aux_transfer() to handle these cases and notify upper layers that
> such errors have happened. This helps the retry logic understand that a
> timeout has happened, or to shorten the read length if the panel isn't
> able to handle the longest read possible.
>
> Note: I don't have any hardware that exhibits these code paths so this
> is written based on reading the datasheet for this bridge and inspecting
> the code and how this is called.
>
> Changes in v2:
> - Handle WRITE_STATUS_UPDATE properly
>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skrabec@siol.net>
> Cc: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 36 ++++++++++++++++++++++++---
> 1 file changed, 32 insertions(+), 4 deletions(-)

This looks right to me, now. Hopefully if/when someone ends up with
hardware that exercises these codepaths they'll at least be in a
better state and maybe they will all just work! :-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

\
 
 \ /
  Last update: 2020-11-02 17:31    [W:0.831 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site