lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH v8 17/18] scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug
> On Wed, 2020-08-19 at 23:20 +0800, John Garry wrote:
> > From: Kashyap Desai <kashyap.desai@broadcom.com>
> >
> > Fusion adapters can steer completions to individual queues, and we now
> > have support for shared host-wide tags.
> > So we can enable multiqueue support for fusion adapters.
> >
> > Once driver enable shared host-wide tags, cpu hotplug feature is also
> > supported as it was enabled using below patchsets - commit
> > bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are
> > offline")
> >
> > Currently driver has provision to disable host-wide tags using
> > "host_tagset_enable" module parameter.
> >
> > Once we do not have any major performance regression using host-wide
> > tags, we will drop the hand-crafted interrupt affinity settings.
> >
> > Performance is also meeting the expecatation - (used both none and
> > mq-deadline scheduler)
> > 24 Drive SSD on Aero with/without this patch can get 3.1M IOPs
> > 3 VDs consist of 8 SAS SSD on Aero with/without this patch can get
> > 3.1M IOPs.
> >
> > Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> > Signed-off-by: Hannes Reinecke <hare@suse.com>
> > Signed-off-by: John Garry <john.garry@huawei.com>
>
> Reverting this commit fixed an issue that Dell Power Edge R6415 server
> with
> megaraid_sas is unable to boot.

I will take a look at this. BTW, can you try keeping same PATCH but use
module parameter "host_tagset_enable =0"

Kashyap
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2020-11-02 15:33    [W:0.165 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site