lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v8 17/18] scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug
From
Date
On Wed, 2020-08-19 at 23:20 +0800, John Garry wrote:
> From: Kashyap Desai <kashyap.desai@broadcom.com>
>
> Fusion adapters can steer completions to individual queues, and
> we now have support for shared host-wide tags.
> So we can enable multiqueue support for fusion adapters.
>
> Once driver enable shared host-wide tags, cpu hotplug feature is also
> supported as it was enabled using below patchsets -
> commit bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are
> offline")
>
> Currently driver has provision to disable host-wide tags using
> "host_tagset_enable" module parameter.
>
> Once we do not have any major performance regression using host-wide
> tags, we will drop the hand-crafted interrupt affinity settings.
>
> Performance is also meeting the expecatation - (used both none and
> mq-deadline scheduler)
> 24 Drive SSD on Aero with/without this patch can get 3.1M IOPs
> 3 VDs consist of 8 SAS SSD on Aero with/without this patch can get 3.1M
> IOPs.
>
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Signed-off-by: Hannes Reinecke <hare@suse.com>
> Signed-off-by: John Garry <john.garry@huawei.com>

Reverting this commit fixed an issue that Dell Power Edge R6415 server with
megaraid_sas is unable to boot.

c1:00.0 RAID bus controller: Broadcom / LSI MegaRAID SAS-3 3108 [Invader] (rev 02)
DeviceName: Integrated RAID
Subsystem: Dell PERC H730P Mini
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
NUMA node: 3
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at a5500000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a5400000 (64-bit, non-prefetchable) [size=1M]
Expansion ROM at <ignored> [disabled]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 512 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s <2us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s (ok), Width x8 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, NROPrPrP-, LTR-
10BitTagComp-, 10BitTagReq-, OBFF Not Supported, ExtFmt-, EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-, TPHComp-, ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [c0] MSI-X: Enable+ Count=97 Masked-
Vector table: BAR=1 offset=0000e000
PBA: BAR=1 offset=0000f000
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 04000001 c000000f c1080000 4ba9007a
Capabilities: [1e0 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn-, PerformEqu-
LaneErrStat: 0
Capabilities: [1c0 v1] Power Budgeting <?>
Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas

[ 26.330282][ T567] megasas: 07.714.04.00-rc1
[ 26.355663][ T611] ahci 0000:87:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 26.364585][ T611] ahci 0000:87:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 26.376125][ T289] megaraid_sas 0000:c1:00.0: FW now in Ready state
[ 26.382534][ T289] megaraid_sas 0000:c1:00.0: 63 bit DMA mask and 32 bit consistent mask
[ 26.391537][ T289] megaraid_sas 0000:c1:00.0: firmware supports msix : (96)
[ 26.431767][ T611] scsi host1: ahci
[ 26.492580][ T611] ata1: SATA max UDMA/133 abar m4096@0xc0a02000 port 0xc0a02100 irq 60
[ 26.701197][ T283] bnxt_en 0000:84:00.0 eth0: Broadcom BCM57416 NetXtreme-E 10GBase-T Ethernet found at mem ad210000, node addr 4c:d9:8f:4a:20:e6
[ 26.714352][ T283] bnxt_en 0000:84:00.0: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[ 26.743738][ T24] tg3 0000:81:00.0 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 4c:d9:8f:65:3f:32
[ 26.754974][ T24] tg3 0000:81:00.0 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 26.765523][ T24] tg3 0000:81:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 26.774074][ T24] tg3 0000:81:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ 26.842518][ T620] ata1: SATA link down (SStatus 0 SControl 300)
[ 26.945741][ T289] megaraid_sas 0000:c1:00.0: requested/available msix 49/49
[ 26.952912][ T289] megaraid_sas 0000:c1:00.0: current msix/online cpus : (49/48)
[ 26.960401][ T289] megaraid_sas 0000:c1:00.0: RDPQ mode : (disabled)
[ 26.966876][ T289] megaraid_sas 0000:c1:00.0: Current firmware supports maximum commands: 928 LDIO threshold: 0
[ 27.079361][ T289] megaraid_sas 0000:c1:00.0: Performance mode :Latency (latency index = 1)
[ 27.085381][ T283] bnxt_en 0000:84:00.1 eth2: Broadcom BCM57416 NetXtreme-E 10GBase-T Ethernet found at mem ad200000, node addr 4c:d9:8f:4a:20:e7
[ 27.087824][ T289] megaraid_sas 0000:c1:00.0: FW supports sync cache : No
[ 27.100959][ T283] bnxt_en 0000:84:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[ 27.107835][ T289] megaraid_sas 0000:c1:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 27.130978][ T24] tg3 0000:81:00.1 eth3: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 4c:d9:8f:65:3f:33
[ 27.142919][ T24] tg3 0000:81:00.1 eth3: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 27.146042][ T571] bnxt_en 0000:84:00.1 enp132s0f1np1: renamed from eth2
[ 27.153456][ T24] tg3 0000:81:00.1 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 27.153467][ T24] tg3 0000:81:00.1 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
[ 27.200900][ T289] megaraid_sas 0000:c1:00.0: FW provided supportMaxExtLDs: 1 max_lds: 64
[ 27.209174][ T289] megaraid_sas 0000:c1:00.0: controller type : MR(2048MB)
[ 27.216260][ T289] megaraid_sas 0000:c1:00.0: Online Controller Reset(OCR) : Enabled
[ 27.224105][ T289] megaraid_sas 0000:c1:00.0: Secure JBOD support : No
[ 27.230720][ T289] megaraid_sas 0000:c1:00.0: NVMe passthru support : No
[ 27.237527][ T289] megaraid_sas 0000:c1:00.0: FW provided TM TaskAbort/Reset timeout : 0 secs/0 secs
[ 27.246754][ T289] megaraid_sas 0000:c1:00.0: JBOD sequence map support : No
[ 27.253906][ T289] megaraid_sas 0000:c1:00.0: PCI Lane Margining support : No
[ 27.341447][ T289] megaraid_sas 0000:c1:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000
[ 27.351729][ T289] megaraid_sas 0000:c1:00.0: INIT adapter done
[ 27.357742][ T289] megaraid_sas 0000:c1:00.0: JBOD sequence map is disabled megasas_setup_jbod_map 5709
[ 27.367832][ T289] megaraid_sas 0000:c1:00.0: pci id : (0x1000)/(0x005d)/(0x1028)/(0x1f47)
[ 27.376287][ T289] megaraid_sas 0000:c1:00.0: unevenspan support : yes
[ 27.382925][ T289] megaraid_sas 0000:c1:00.0: firmware crash dump : no
[ 27.389547][ T289] megaraid_sas 0000:c1:00.0: JBOD sequence map : disabled
[ 27.397816][ T289] megaraid_sas 0000:c1:00.0: Max firmware commands: 927 shared with nr_hw_queues = 48
[ 27.407232][ T289] scsi host0: Avago SAS based MegaRAID driver
[ 27.430212][ T586] bnxt_en 0000:84:00.0 enp132s0f0np0: renamed from eth0
[ 27.781038][ T603] tg3 0000:81:00.0 eno1: renamed from eth1
[ 28.194046][ T552] tg3 0000:81:00.1 eno2: renamed from eth3

[ 251.961152][ T330] INFO: task systemd-udevd:567 blocked for more than 122 seconds.
[ 251.968876][ T330] Not tainted 5.10.0-rc1-next-20201102 #1
[ 251.975003][ T330] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 251.983546][ T330] task:systemd-udevd state:D stack:27224 pid: 567 ppid: 506 flags:0x00004324
[ 251.992620][ T330] Call Trace:
[ 251.995784][ T330] __schedule+0x71d/0x1b60
[ 252.000067][ T330] ? __sched_text_start+0x8/0x8
[ 252.004798][ T330] schedule+0xbf/0x270
[ 252.008735][ T330] schedule_timeout+0x3fc/0x590
[ 252.013464][ T330] ? usleep_range+0x120/0x120
[ 252.018008][ T330] ? wait_for_completion+0x156/0x250
[ 252.023176][ T330] ? lock_downgrade+0x700/0x700
[ 252.027886][ T330] ? rcu_read_unlock+0x40/0x40
[ 252.032530][ T330] ? do_raw_spin_lock+0x121/0x290
[ 252.037412][ T330] ? lockdep_hardirqs_on_prepare+0x27c/0x3d0
[ 252.043268][ T330] ? _raw_spin_unlock_irq+0x1f/0x30
[ 252.048331][ T330] wait_for_completion+0x15e/0x250
[ 252.053323][ T330] ? wait_for_completion_interruptible+0x320/0x320
[ 252.059687][ T330] ? lockdep_hardirqs_on_prepare+0x27c/0x3d0
[ 252.065543][ T330] ? _raw_spin_unlock_irq+0x1f/0x30
[ 252.070606][ T330] __flush_work+0x42a/0x900
[ 252.074989][ T330] ? queue_delayed_work_on+0x90/0x90
[ 252.080139][ T330] ? __queue_work+0x463/0xf40
[ 252.084700][ T330] ? init_pwq+0x320/0x320
[ 252.088891][ T330] ? queue_work_on+0x5e/0x80
[ 252.093364][ T330] ? trace_hardirqs_on+0x1c/0x150
[ 252.098255][ T330] work_on_cpu+0xe7/0x130
[ 252.102461][ T330] ? flush_delayed_work+0xc0/0xc0
[ 252.107342][ T330] ? __mutex_unlock_slowpath+0xd4/0x670
[ 252.112764][ T330] ? work_debug_hint+0x30/0x30
[ 252.117391][ T330] ? pci_device_shutdown+0x80/0x80
[ 252.122378][ T330] ? cpumask_next_and+0x57/0x80
[ 252.127094][ T330] pci_device_probe+0x500/0x5c0
[ 252.131824][ T330] ? pci_device_remove+0x1f0/0x1f0
[ 252.136805][ T330] really_probe+0x207/0xad0
[ 252.141191][ T330] ? device_driver_attach+0x120/0x120
[ 252.146428][ T330] driver_probe_device+0x1f1/0x370
[ 252.151424][ T330] device_driver_attach+0xe5/0x120
[ 252.156399][ T330] __driver_attach+0xf0/0x260
[ 252.160953][ T330] bus_for_each_dev+0x117/0x1a0
[ 252.165669][ T330] ? subsys_dev_iter_exit+0x10/0x10
[ 252.170731][ T330] bus_add_driver+0x399/0x560
[ 252.175289][ T330] driver_register+0x189/0x310
[ 252.179919][ T330] ? 0xffffffffc05c1000
[ 252.183960][ T330] megasas_init+0x117/0x1000 [megaraid_sas]
[ 252.189713][ T330] do_one_initcall+0xf6/0x510
[ 252.194267][ T330] ? perf_trace_initcall_level+0x490/0x490
[ 252.199940][ T330] ? kasan_unpoison_shadow+0x30/0x40
[ 252.205104][ T330] ? __kasan_kmalloc.constprop.11+0xc1/0xd0
[ 252.210859][ T330] ? do_init_module+0x49/0x6c0
[ 252.215500][ T330] ? kmem_cache_alloc_trace+0x11f/0x1e0
[ 252.220925][ T330] ? kasan_unpoison_shadow+0x30/0x40
[ 252.226068][ T330] do_init_module+0x1ed/0x6c0
[ 252.230608][ T330] load_module+0x4a59/0x5d20
[ 252.235081][ T330] ? layout_and_allocate+0x2770/0x2770
[ 252.240404][ T330] ? __vmalloc_node+0x8d/0x100
[ 252.245046][ T330] ? kernel_read_file+0x485/0x5a0
[ 252.249934][ T330] ? kernel_read_file+0x305/0x5a0
[ 252.254839][ T330] ? __x64_sys_fsconfig+0x970/0x970
[ 252.259903][ T330] ? __do_sys_finit_module+0xff/0x180
[ 252.265153][ T330] __do_sys_finit_module+0xff/0x180
[ 252.270216][ T330] ? __do_sys_init_module+0x1d0/0x1d0
[ 252.275465][ T330] ? __fget_files+0x1c3/0x2e0
[ 252.280010][ T330] do_syscall_64+0x33/0x40
[ 252.284304][ T330] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 252.290054][ T330] RIP: 0033:0x7fbb3e2fa78d
[ 252.294348][ T330] Code: Unable to access opcode bytes at RIP 0x7fbb3e2fa763.
[ 252.301584][ T330] RSP: 002b:00007ffe572e8d18 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 252.309855][ T330] RAX: ffffffffffffffda RBX: 000055c7795d90f0 RCX: 00007fbb3e2fa78d
[ 252.317703][ T330] RDX: 0000000000000000 RSI: 00007fbb3ee6c82d RDI: 0000000000000006
[ 252.325553][ T330] RBP: 00007fbb3ee6c82d R08: 0000000000000000 R09: 00007ffe572e8e40
[ 252.333402][ T330] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000
[ 252.341257][ T330] R13: 000055c7795930e0 R14: 0000000000020000 R15: 0000000000000000
[ 252.349117][ T330]
[ 252.349117][ T330] Showing all locks held in the system:
[ 252.356770][ T330] 3 locks held by kworker/3:1/289:
[ 252.361759][ T330] #0: ffff8881001eb938 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7ec/0x1610
[ 252.371976][ T330] #1: ffffc90004ee7e00 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x820/0x1610
[ 252.382803][ T330] #2: ffff8881430380e0 (&shost->scan_mutex){+.+.}-{3:3}, at: scsi_scan_host_selected+0xde/0x260
[ 252.393199][ T330] 1 lock held by khungtaskd/330:
[ 252.397993][ T330] #0: ffffffff9d4d3760 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire.constprop.52+0x0/0x30
[ 252.408296][ T330] 1 lock held by systemd-journal/420:
[ 252.413562][ T330] 1 lock held by systemd-udevd/567:
[ 252.418619][ T330] #0: ffff8881207ac218 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x37/0x120
[ 252.428159][ T330]
[ 252.430355][ T330] =============================================
[ 252.430355][ T330]

> ---
> drivers/scsi/megaraid/megaraid_sas_base.c | 39 +++++++++++++++++++++
> drivers/scsi/megaraid/megaraid_sas_fusion.c | 29 ++++++++-------
> 2 files changed, 55 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c
> b/drivers/scsi/megaraid/megaraid_sas_base.c
> index 861f7140f52e..6960922d0d7f 100644
> --- a/drivers/scsi/megaraid/megaraid_sas_base.c
> +++ b/drivers/scsi/megaraid/megaraid_sas_base.c
> @@ -37,6 +37,7 @@
> #include <linux/poll.h>
> #include <linux/vmalloc.h>
> #include <linux/irq_poll.h>
> +#include <linux/blk-mq-pci.h>
>
> #include <scsi/scsi.h>
> #include <scsi/scsi_cmnd.h>
> @@ -113,6 +114,10 @@ unsigned int enable_sdev_max_qd;
> module_param(enable_sdev_max_qd, int, 0444);
> MODULE_PARM_DESC(enable_sdev_max_qd, "Enable sdev max qd as can_queue.
> Default: 0");
>
> +int host_tagset_enable = 1;
> +module_param(host_tagset_enable, int, 0444);
> +MODULE_PARM_DESC(host_tagset_enable, "Shared host tagset enable/disable
> Default: enable(1)");
> +
> MODULE_LICENSE("GPL");
> MODULE_VERSION(MEGASAS_VERSION);
> MODULE_AUTHOR("megaraidlinux.pdl@broadcom.com");
> @@ -3119,6 +3124,19 @@ megasas_bios_param(struct scsi_device *sdev, struct
> block_device *bdev,
> return 0;
> }
>
> +static int megasas_map_queues(struct Scsi_Host *shost)
> +{
> + struct megasas_instance *instance;
> +
> + instance = (struct megasas_instance *)shost->hostdata;
> +
> + if (shost->nr_hw_queues == 1)
> + return 0;
> +
> + return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
> + instance->pdev, instance->low_latency_index_start);
> +}
> +
> static void megasas_aen_polling(struct work_struct *work);
>
> /**
> @@ -3427,6 +3445,7 @@ static struct scsi_host_template megasas_template = {
> .eh_timed_out = megasas_reset_timer,
> .shost_attrs = megaraid_host_attrs,
> .bios_param = megasas_bios_param,
> + .map_queues = megasas_map_queues,
> .change_queue_depth = scsi_change_queue_depth,
> .max_segment_size = 0xffffffff,
> };
> @@ -6808,6 +6827,26 @@ static int megasas_io_attach(struct megasas_instance
> *instance)
> host->max_lun = MEGASAS_MAX_LUN;
> host->max_cmd_len = 16;
>
> + /* Use shared host tagset only for fusion adaptors
> + * if there are managed interrupts (smp affinity enabled case).
> + * Single msix_vectors in kdump, so shared host tag is also disabled.
> + */
> +
> + host->host_tagset = 0;
> + host->nr_hw_queues = 1;
> +
> + if ((instance->adapter_type != MFI_SERIES) &&
> + (instance->msix_vectors > instance->low_latency_index_start) &&
> + host_tagset_enable &&
> + instance->smp_affinity_enable) {
> + host->host_tagset = 1;
> + host->nr_hw_queues = instance->msix_vectors -
> + instance->low_latency_index_start;
> + }
> +
> + dev_info(&instance->pdev->dev,
> + "Max firmware commands: %d shared with nr_hw_queues = %d\n",
> + instance->max_fw_cmds, host->nr_hw_queues);
> /*
> * Notify the mid-layer about the new controller
> */
> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c
> b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> index 0824410f78f8..a4251121f173 100644
> --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
> +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> @@ -359,24 +359,29 @@ megasas_get_msix_index(struct megasas_instance
> *instance,
> {
> int sdev_busy;
>
> - /* nr_hw_queue = 1 for MegaRAID */
> - struct blk_mq_hw_ctx *hctx =
> - scmd->device->request_queue->queue_hw_ctx[0];
> -
> - sdev_busy = atomic_read(&hctx->nr_active);
> + /* TBD - if sml remove device_busy in future, driver
> + * should track counter in internal structure.
> + */
> + sdev_busy = atomic_read(&scmd->device->device_busy);
>
> if (instance->perf_mode == MR_BALANCED_PERF_MODE &&
> - sdev_busy > (data_arms * MR_DEVICE_HIGH_IOPS_DEPTH))
> + sdev_busy > (data_arms * MR_DEVICE_HIGH_IOPS_DEPTH)) {
> cmd->request_desc->SCSIIO.MSIxIndex =
> mega_mod64((atomic64_add_return(1, &instance-
> >high_iops_outstanding) /
> MR_HIGH_IOPS_BATCH_COUNT), instance-
> >low_latency_index_start);
> - else if (instance->msix_load_balance)
> + } else if (instance->msix_load_balance) {
> cmd->request_desc->SCSIIO.MSIxIndex =
> (mega_mod64(atomic64_add_return(1, &instance-
> >total_io_count),
> instance->msix_vectors));
> - else
> + } else if (instance->host->nr_hw_queues > 1) {
> + u32 tag = blk_mq_unique_tag(scmd->request);
> +
> + cmd->request_desc->SCSIIO.MSIxIndex =
> blk_mq_unique_tag_to_hwq(tag) +
> + instance->low_latency_index_start;
> + } else {
> cmd->request_desc->SCSIIO.MSIxIndex =
> instance->reply_map[raw_smp_processor_id()];
> + }
> }
>
> /**
> @@ -956,9 +961,6 @@ megasas_alloc_cmds_fusion(struct megasas_instance
> *instance)
> if (megasas_alloc_cmdlist_fusion(instance))
> goto fail_exit;
>
> - dev_info(&instance->pdev->dev, "Configured max firmware commands: %d\n",
> - instance->max_fw_cmds);
> -
> /* The first 256 bytes (SMID 0) is not used. Don't add to the cmd list
> */
> io_req_base = fusion->io_request_frames +
> MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
> io_req_base_phys = fusion->io_request_frames_phys +
> MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
> @@ -1102,8 +1104,9 @@ megasas_ioc_init_fusion(struct megasas_instance
> *instance)
> MR_HIGH_IOPS_QUEUE_COUNT) && cur_intr_coalescing)
> instance->perf_mode = MR_BALANCED_PERF_MODE;
>
> - dev_info(&instance->pdev->dev, "Performance mode :%s\n",
> - MEGASAS_PERF_MODE_2STR(instance->perf_mode));
> + dev_info(&instance->pdev->dev, "Performance mode :%s (latency index =
> %d)\n",
> + MEGASAS_PERF_MODE_2STR(instance->perf_mode),
> + instance->low_latency_index_start);
>
> instance->fw_sync_cache_support = (scratch_pad_1 &
> MR_CAN_HANDLE_SYNC_CACHE_OFFSET) ? 1 : 0;

\
 
 \ /
  Last update: 2020-11-02 15:18    [W:0.236 / U:2.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site