lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v13 2/8] mtd: rawnand: rockchip: NFC drivers for RK3308, RK2928 and others
Hi Johan, Yifeng

Johan Jonker <jbx6244@gmail.com> wrote on Mon, 2 Nov 2020 13:57:56
+0100:

> Hi Yifeng,
>
> Don't poke with "ecc->bytes" ones it is set in rk_nfc_ecc_init(). It
> will not be noted by the MTD frame work or userspace. I think there's
> currently no way to let the user know that a different ECC must be used.
> Neither can the user set ECC on the fly.
>
> Example R/W flow:
>
> nand_select_target()
> chip->ecc.write_page_raw()
> chip->ecc.write_page()
>
> [..]
>
> chip->ecc.read_page_raw()
> chip->ecc.read_page()
> nand_deselect_target()
>
> A write/read with:
>
> rk_nfc_read_page_hwecc()
> rk_nfc_write_page_hwecc()
>
> or
>
> rk_nfc_read_page_raw()
> rk_nfc_write_page_raw()
>
> must end up with the same result. If we can't archive that, then we
> shouldn't offer RAW mode to the user for now. If Miquel agrees you
> should just get the driver ready now without these 2 functions and round
> things up.

What about just not supporting the BootROM area if it was marked
"reserved" by the BRom in the DT?

Raw accessors is really a nice and basic feature that I would like to
have in every new driver.

Thanks,
Miquèl

\
 
 \ /
  Last update: 2020-11-02 14:08    [W:0.182 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site