lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
Date
Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
to PCIe and QSGMII (multi-link SERDES).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../dts/ti/k3-j7200-common-proc-board.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index ef03e7636b66..65a2e5aeb050 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -8,6 +8,7 @@
#include "k3-j7200-som-p0.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>

/ {
chosen {
@@ -213,3 +214,25 @@
dr_mode = "otg";
maximum-speed = "high-speed";
};
+
+&serdes_refclk {
+ clock-frequency = <100000000>;
+};
+
+&serdes0 {
+ serdes0_pcie_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+ };
+
+ serdes0_qsgmii_link: phy@1 {
+ reg = <2>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_QSGMII>;
+ resets = <&serdes_wiz0 3>;
+ };
+};
--
2.17.1
\
 
 \ /
  Last update: 2020-11-02 11:13    [W:0.198 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site