lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 28/39] docs: ABI: fix syntax to be parsed using ReST notation
On Fri, Oct 30, 2020 at 8:41 AM Mauro Carvalho Chehab
<mchehab+huawei@kernel.org> wrote:
>
> There are a number of new changes at the ABI files that cause
> them to produce warnings when generating ABI output.
>
> Fix them.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../ABI/stable/sysfs-driver-firmware-zynqmp | 62 ++++++++-----
> Documentation/ABI/testing/debugfs-moxtet | 28 ++++--
> .../ABI/testing/debugfs-turris-mox-rwtm | 6 +-
> .../sysfs-bus-event_source-devices-dfl_fme | 14 +--
> Documentation/ABI/testing/sysfs-bus-most | 6 +-
> Documentation/ABI/testing/sysfs-class-devfreq | 6 +-
> Documentation/ABI/testing/sysfs-class-ocxl | 14 +--
> .../ABI/testing/sysfs-class-power-wilco | 18 ++--
> .../ABI/testing/sysfs-class-rnbd-client | 93 ++++++++++---------
> .../ABI/testing/sysfs-class-rtrs-client | 23 +++--
For rnbd/rtrs, looks good to me, thanks!
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
> .../sysfs-devices-platform-stratix10-rsu | 10 ++
> .../ABI/testing/sysfs-driver-w1_therm | 75 ++++++++++-----
> .../ABI/testing/sysfs-platform-dfl-fme | 14 ++-
> Documentation/ABI/testing/sysfs-platform-dptf | 11 ++-
> .../sysfs-platform-intel-wmi-sbl-fw-update | 1 +
> .../testing/sysfs-platform-mellanox-bootctl | 50 ++++++----
> .../ABI/testing/sysfs-platform-wilco-ec | 1 +
> 17 files changed, 271 insertions(+), 161 deletions(-)
>
> diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
> index 00fa04c76ff3..f5724bb5b462 100644
> --- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
> +++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
> @@ -12,13 +12,15 @@ Description:
> resets. Three registers are used by the FSBL and
> other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
>
> - Usage:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> - # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> + Usage::
>
> - Example:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> + # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> +
> + Example::
> +
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
> + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
>
> Users: Xilinx
>
> @@ -39,13 +41,15 @@ Description:
> software products: PERS_GLOB_GEN_STORAGE{4:7}.
> Register is reset only by a POR reset.
>
> - Usage:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> - # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> + Usage::
>
> - Example:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> - # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> + # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> +
> + Example::
> +
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
> + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
>
> Users: Xilinx
>
> @@ -61,23 +65,28 @@ Description:
>
> Following are available shutdown scopes(subtypes):
>
> - subsystem: Only the APU along with all of its peripherals
> + subsystem:
> + Only the APU along with all of its peripherals
> not used by other processing units will be
> shut down. This may result in the FPD power
> domain being shut down provided that no other
> processing unit uses FPD peripherals or DRAM.
> - ps_only: The complete PS will be shut down, including the
> + ps_only:
> + The complete PS will be shut down, including the
> RPU, PMU, etc. Only the PL domain (FPGA)
> remains untouched.
> - system: The complete system/device is shut down.
> + system:
> + The complete system/device is shut down.
>
> - Usage:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> - # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> + Usage::
>
> - Example:
> - # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> - # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> + # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> +
> + Example::
> +
> + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
> + # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
>
> Users: Xilinx
>
> @@ -94,10 +103,13 @@ Description:
> system restart.
>
> Usage:
> - Set healthy bit
> - # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
>
> - Unset healthy bit
> - # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
> + Set healthy bit::
> +
> + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
> +
> + Unset healthy bit::
> +
> + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
>
> Users: Xilinx
> diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet
> index 67b1717794d8..15dfaecb2892 100644
> --- a/Documentation/ABI/testing/debugfs-moxtet
> +++ b/Documentation/ABI/testing/debugfs-moxtet
> @@ -5,10 +5,16 @@ Contact: Marek Behún <marek.behun@nic.cz>
> Description: (R) Read input from the shift registers, in hexadecimal.
> Returns N+1 bytes, where N is the number of Moxtet connected
> modules. The first byte is from the CPU board itself.
> - Example: 101214
> - 10: CPU board with SD card
> - 12: 2 = PCIe module, 1 = IRQ not active
> - 14: 4 = Peridot module, 1 = IRQ not active
> +
> + Example::
> +
> + 101214
> +
> + == =======================================
> + 10 CPU board with SD card
> + 12 2 = PCIe module, 1 = IRQ not active
> + 14 4 = Peridot module, 1 = IRQ not active
> + == =======================================
>
> What: /sys/kernel/debug/moxtet/output
> Date: March 2019
> @@ -17,7 +23,13 @@ Contact: Marek Behún <marek.behun@nic.cz>
> Description: (RW) Read last written value to the shift registers, in
> hexadecimal, or write values to the shift registers, also
> in hexadecimal.
> - Example: 0102
> - 01: 01 was last written, or is to be written, to the
> - first module's shift register
> - 02: the same for second module
> +
> + Example::
> +
> + 0102
> +
> + == ================================================
> + 01 01 was last written, or is to be written, to the
> + first module's shift register
> + 02 the same for second module
> + == ================================================
> diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
> index 2b3255ee68fd..c8f7dadd591c 100644
> --- a/Documentation/ABI/testing/debugfs-turris-mox-rwtm
> +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm
> @@ -2,8 +2,10 @@ What: /sys/kernel/debug/turris-mox-rwtm/do_sign
> Date: Jun 2020
> KernelVersion: 5.8
> Contact: Marek Behún <marek.behun@nic.cz>
> -Description: (W) Message to sign with the ECDSA private key stored in
> +Description: (W)
> + Message to sign with the ECDSA private key stored in
> device's OTP. The message must be exactly 64 bytes (since
> this is intended for SHA-512 hashes).
> - (R) The resulting signature, 136 bytes. This contains the R and
> + (R)
> + The resulting signature, 136 bytes. This contains the R and
> S values of the ECDSA signature, both in big-endian format.
> diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
> index c9278a3b3df1..63a32ddcb95e 100644
> --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
> +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme
> @@ -8,13 +8,13 @@ Description: Read-only. Attribute group to describe the magic bits
>
> Each attribute under this group defines a bit range of the
> perf_event_attr.config. All supported attributes are listed
> - below.
> + below::
>
> event = "config:0-11" - event ID
> evtype = "config:12-15" - event type
> portid = "config:16-23" - event source
>
> - For example,
> + For example::
>
> fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff"
>
> @@ -40,11 +40,11 @@ Description: Read-only. Attribute group to describe performance monitoring
>
> All supported performance monitoring events are listed below.
>
> - Basic events (evtype=0x00)
> + Basic events (evtype=0x00)::
>
> clock = "event=0x00,evtype=0x00,portid=0xff"
>
> - Cache events (evtype=0x01)
> + Cache events (evtype=0x01)::
>
> cache_read_hit = "event=0x00,evtype=0x01,portid=0xff"
> cache_read_miss = "event=0x01,evtype=0x01,portid=0xff"
> @@ -59,7 +59,7 @@ Description: Read-only. Attribute group to describe performance monitoring
> cache_rx_req_stall = "event=0x09,evtype=0x01,portid=0xff"
> cache_eviction = "event=0x0a,evtype=0x01,portid=0xff"
>
> - Fabric events (evtype=0x02)
> + Fabric events (evtype=0x02)::
>
> fab_pcie0_read = "event=0x00,evtype=0x02,portid=0xff"
> fab_pcie0_write = "event=0x01,evtype=0x02,portid=0xff"
> @@ -78,7 +78,7 @@ Description: Read-only. Attribute group to describe performance monitoring
> fab_port_mmio_read = "event=0x06,evtype=0x02,portid=?"
> fab_port_mmio_write = "event=0x07,evtype=0x02,portid=?"
>
> - VTD events (evtype=0x03)
> + VTD events (evtype=0x03)::
>
> vtd_port_read_transaction = "event=0x00,evtype=0x03,portid=?"
> vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?"
> @@ -88,7 +88,7 @@ Description: Read-only. Attribute group to describe performance monitoring
> vtd_port_devtlb_2m_fill = "event=0x05,evtype=0x03,portid=?"
> vtd_port_devtlb_1g_fill = "event=0x06,evtype=0x03,portid=?"
>
> - VTD SIP events (evtype=0x04)
> + VTD SIP events (evtype=0x04)::
>
> vtd_sip_iotlb_4k_hit = "event=0x00,evtype=0x04,portid=0xff"
> vtd_sip_iotlb_2m_hit = "event=0x01,evtype=0x04,portid=0xff"
> diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most
> index ec0a603d804b..38cc03e408e7 100644
> --- a/Documentation/ABI/testing/sysfs-bus-most
> +++ b/Documentation/ABI/testing/sysfs-bus-most
> @@ -235,7 +235,8 @@ KernelVersion: 4.15
> Contact: Christian Gromm <christian.gromm@microchip.com>
> Description:
> This is to read back the configured direction of the channel.
> - The following strings will be accepted:
> + The following strings will be accepted::
> +
> 'tx',
> 'rx'
> Users:
> @@ -246,7 +247,8 @@ KernelVersion: 4.15
> Contact: Christian Gromm <christian.gromm@microchip.com>
> Description:
> This is to read back the configured data type of the channel.
> - The following strings will be accepted:
> + The following strings will be accepted::
> +
> 'control',
> 'async',
> 'sync',
> diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
> index 67af3f31e17c..386bc230a33d 100644
> --- a/Documentation/ABI/testing/sysfs-class-devfreq
> +++ b/Documentation/ABI/testing/sysfs-class-devfreq
> @@ -48,7 +48,8 @@ Description:
> driver should provide the list of available frequencies
> with its profile. If need to reset the statistics of devfreq
> behavior on a specific device, enter 0(zero) to 'trans_stat'
> - as following:
> + as following::
> +
> echo 0 > /sys/class/devfreq/.../trans_stat
>
> What: /sys/class/devfreq/.../available_frequencies
> @@ -124,7 +125,8 @@ Description:
> This work timer is used by devfreq workqueue in order to
> monitor the device status such as utilization. The user
> can change the work timer on runtime according to their demand
> - as following:
> + as following::
> +
> echo deferrable > /sys/class/devfreq/.../timer
> echo delayed > /sys/class/devfreq/.../timer
>
> diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl
> index bf33f4fda58f..847a7edc3113 100644
> --- a/Documentation/ABI/testing/sysfs-class-ocxl
> +++ b/Documentation/ABI/testing/sysfs-class-ocxl
> @@ -13,8 +13,8 @@ Description: read only
> where:
>
> ==== ===============================================
> - n: number of currently active contexts, for debug
> - max: maximum number of contexts supported by the AFU
> + n number of currently active contexts, for debug
> + max maximum number of contexts supported by the AFU
> ==== ===============================================
>
> What: /sys/class/ocxl/<afu name>/pp_mmio_size
> @@ -43,7 +43,9 @@ Contact: linuxppc-dev@lists.ozlabs.org
> Description: read/write
> Control whether the FPGA is reloaded on a link reset. Enabled
> through a vendor-specific logic block on the FPGA.
> - 0 Do not reload FPGA image from flash
> - 1 Reload FPGA image from flash
> - unavailable
> - The device does not support this capability
> +
> + =========== ===========================================
> + 0 Do not reload FPGA image from flash
> + 1 Reload FPGA image from flash
> + unavailable The device does not support this capability
> + =========== ===========================================
> diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco
> index 84fde1d0ada0..82af180fcaab 100644
> --- a/Documentation/ABI/testing/sysfs-class-power-wilco
> +++ b/Documentation/ABI/testing/sysfs-class-power-wilco
> @@ -4,17 +4,23 @@ KernelVersion: 5.2
> Description:
> What charging algorithm to use:
>
> - Standard: Fully charges battery at a standard rate.
> - Adaptive: Battery settings adaptively optimized based on
> + Standard:
> + Fully charges battery at a standard rate.
> + Adaptive:
> + Battery settings adaptively optimized based on
> typical battery usage pattern.
> - Fast: Battery charges over a shorter period.
> - Trickle: Extends battery lifespan, intended for users who
> + Fast:
> + Battery charges over a shorter period.
> + Trickle:
> + Extends battery lifespan, intended for users who
> primarily use their Chromebook while connected to AC.
> - Custom: A low and high threshold percentage is specified.
> + Custom:
> + A low and high threshold percentage is specified.
> Charging begins when level drops below
> charge_control_start_threshold, and ceases when
> level is above charge_control_end_threshold.
> - Long Life: Customized charge rate for last longer battery life.
> + Long Life:
> + Customized charge rate for last longer battery life.
> On Wilco device this mode is pre-configured in the factory
> through EC's private PID. Swiching to a different mode will
> be denied by Wilco EC when Long Life mode is enabled.
> diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client
> index c084f203b41e..00c0286733d4 100644
> --- a/Documentation/ABI/testing/sysfs-class-rnbd-client
> +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client
> @@ -5,62 +5,70 @@ Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
> Description: Provide information about RNBD-client.
> All sysfs files that are not read-only provide the usage information on read:
>
> - Example:
> - # cat /sys/class/rnbd-client/ctl/map_device
> + Example::
>
> - > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
> - > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
> - > [access_mode=<ro|rw|migration>] > map_device
> - >
> - > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
> + # cat /sys/class/rnbd-client/ctl/map_device
> +
> + > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr>
> + > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side>
> + > [access_mode=<ro|rw|migration>] > map_device
> + >
> + > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ]
>
> What: /sys/class/rnbd-client/ctl/map_device
> Date: Feb 2020
> KernelVersion: 5.7
> Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
> -Description: Expected format is the following:
> +Description: Expected format is the following::
>
> - sessname=<name of the rtrs session>
> - path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
> - device_path=<full path on remote side>
> - [access_mode=<ro|rw|migration>]
> + sessname=<name of the rtrs session>
> + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...]
> + device_path=<full path on remote side>
> + [access_mode=<ro|rw|migration>]
>
> Where:
>
> - sessname: accepts a string not bigger than 256 chars, which identifies
> - a given session on the client and on the server.
> - I.e. "clt_hostname-srv_hostname" could be a natural choice.
> + sessname:
> + accepts a string not bigger than 256 chars, which identifies
> + a given session on the client and on the server.
> + I.e. "clt_hostname-srv_hostname" could be a natural choice.
>
> - path: describes a connection between the client and the server by
> - specifying destination and, when required, the source address.
> - The addresses are to be provided in the following format:
> + path:
> + describes a connection between the client and the server by
> + specifying destination and, when required, the source address.
> + The addresses are to be provided in the following format::
>
> - ip:<IPv6>
> - ip:<IPv4>
> - gid:<GID>
> + ip:<IPv6>
> + ip:<IPv4>
> + gid:<GID>
>
> - for example:
> + for example::
> +
> + path=ip:10.0.0.66
>
> - path=ip:10.0.0.66
> The single addr is treated as the destination.
> The connection will be established to this server from any client IP address.
>
> - path=ip:10.0.0.66,ip:10.0.1.66
> + ::
> +
> + path=ip:10.0.0.66,ip:10.0.1.66
> +
> First addr is the source address and the second is the destination.
>
> If multiple "path=" options are specified multiple connection
> will be established and data will be sent according to
> the selected multipath policy (see RTRS mp_policy sysfs entry description).
>
> - device_path: Path to the block device on the server side. Path is specified
> - relative to the directory on server side configured in the
> - 'dev_search_path' module parameter of the rnbd_server.
> - The rnbd_server prepends the <device_path> received from client
> - with <dev_search_path> and tries to open the
> - <dev_search_path>/<device_path> block device. On success,
> - a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
> - directory and an entry in /sys/class/rnbd-client/ctl/devices
> - will be created.
> + device_path:
> + Path to the block device on the server side. Path is specified
> + relative to the directory on server side configured in the
> + 'dev_search_path' module parameter of the rnbd_server.
> + The rnbd_server prepends the <device_path> received from client
> + with <dev_search_path> and tries to open the
> + <dev_search_path>/<device_path> block device. On success,
> + a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/
> + directory and an entry in /sys/class/rnbd-client/ctl/devices
> + will be created.
>
> If 'dev_search_path' contains '%SESSNAME%', then each session can
> have different devices namespace, e.g. server was configured with
> @@ -68,11 +76,12 @@ Description: Expected format is the following:
> client has this string "sessname=blya device_path=sda", then server
> will try to open: /run/rnbd-devs/blya/sda.
>
> - access_mode: the access_mode parameter specifies if the device is to be
> - mapped as "ro" read-only or "rw" read-write. The server allows
> - a device to be exported in rw mode only once. The "migration"
> - access mode has to be specified if a second mapping in read-write
> - mode is desired.
> + access_mode:
> + the access_mode parameter specifies if the device is to be
> + mapped as "ro" read-only or "rw" read-write. The server allows
> + a device to be exported in rw mode only once. The "migration"
> + access mode has to be specified if a second mapping in read-write
> + mode is desired.
>
> By default "rw" is used.
>
> @@ -91,7 +100,7 @@ Description: Expected format is the following:
> is the same as the device name. By extracting the last part of the
> path the path to the device /dev/<dev-name> can be build.
>
> - o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
> + * /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev)
>
> How to find the <device_id> of the device is described on the next
> section.
> @@ -106,6 +115,6 @@ Description: For each device mapped on the client a new symbolic link is created
> The <device_id> of each device is created as follows:
>
> - If the 'device_path' provided during mapping contains slashes ("/"),
> - they are replaced by exclamation mark ("!") and used as as the
> - <device_id>. Otherwise, the <device_id> will be the same as the
> - "device_path" provided.
> + they are replaced by exclamation mark ("!") and used as as the
> + <device_id>. Otherwise, the <device_id> will be the same as the
> + "device_path" provided.
> diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client
> index e7e718db8941..0f7165aab251 100644
> --- a/Documentation/ABI/testing/sysfs-class-rtrs-client
> +++ b/Documentation/ABI/testing/sysfs-class-rtrs-client
> @@ -10,10 +10,10 @@ Date: Feb 2020
> KernelVersion: 5.7
> Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
> Description: RW, adds a new path (connection) to an existing session. Expected format is the
> - following:
> + following::
>
> - <[source addr,]destination addr>
> - *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
> + <[source addr,]destination addr>
> + *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ]
>
> What: /sys/class/rtrs-client/<session-name>/max_reconnect_attempts
> Date: Feb 2020
> @@ -29,10 +29,10 @@ Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud
> Description: Multipath policy specifies which path should be selected on each IO:
>
> round-robin (0):
> - select path in per CPU round-robin manner.
> + select path in per CPU round-robin manner.
>
> min-inflight (1):
> - select path with minimum inflights.
> + select path with minimum inflights.
>
> What: /sys/class/rtrs-client/<session-name>/paths/
> Date: Feb 2020
> @@ -109,8 +109,11 @@ Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's
> not the case, the processing of an I/O response could be processed on a
> different CPU than where it was originally submitted. This file shows
> how many interrupts where generated on a non expected CPU.
> - "from:" is the CPU on which the IRQ was expected, but not generated.
> - "to:" is the CPU on which the IRQ was generated, but not expected.
> +
> + "from:"
> + is the CPU on which the IRQ was expected, but not generated.
> + "to:"
> + is the CPU on which the IRQ was generated, but not expected.
>
> What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects
> Date: Feb 2020
> @@ -125,7 +128,7 @@ Date: Feb 2020
> KernelVersion: 5.7
> Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
> Description: Contains statistics regarding rdma operations and inflight operations.
> - The output consists of 6 values:
> + The output consists of 6 values::
>
> - <read-count> <read-total-size> <write-count> <write-total-size> \
> - <inflights> <failovered>
> + <read-count> <read-total-size> <write-count> \
> + <write-total-size> <inflights> <failovered>
> diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> index a8daceb4a956..ee253b033280 100644
> --- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
> @@ -102,6 +102,8 @@ Description:
> b[15:0]
> inform firmware the current software execution
> stage.
> +
> + == ===========================================
> 0 the first stage bootloader didn't run or
> didn't reach the point of launching second
> stage bootloader.
> @@ -111,21 +113,29 @@ Description:
> 2 both first and second stage bootloader ran
> and the operating system launch was
> attempted.
> + == ===========================================
>
> b[16]
> + == ===========================================
> 1 firmware to reset current image retry
> counter.
> 0 no action.
> + == ===========================================
>
> b[17]
> + == ===========================================
> 1 firmware to clear RSU log
> 0 no action.
> + == ===========================================
>
> b[18]
> this is negative logic
> +
> + == ===========================================
> 1 no action
> 0 firmware record the notify code defined
> in b[15:0].
> + == ===========================================
>
> What: /sys/devices/platform/stratix10-rsu.0/dcmf0
> Date: June 2020
> diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
> index 8873bbb075cb..6a37dc33ffdb 100644
> --- a/Documentation/ABI/testing/sysfs-driver-w1_therm
> +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
> @@ -22,8 +22,10 @@ Description:
> device data to its embedded EEPROM, either restore data
> embedded in device EEPROM. Be aware that devices support
> limited EEPROM writing cycles (typical 50k)
> +
> * 'save': save device RAM to EEPROM
> * 'restore': restore EEPROM data in device RAM
> +
> Users: any user space application which wants to communicate with
> w1_term device
>
> @@ -33,9 +35,11 @@ Date: May 2020
> Contact: Akira Shimahara <akira215corp@gmail.com>
> Description:
> (RO) return the power status by asking the device
> +
> * '0': device parasite powered
> * '1': device externally powered
> * '-xx': xx is kernel error when reading power status
> +
> Users: any user space application which wants to communicate with
> w1_term device
>
> @@ -49,10 +53,12 @@ Description:
> will be changed only in device RAM, so it will be cleared when
> power is lost. Trigger a 'save' to EEPROM command to keep
> values after power-on. Read or write are :
> +
> * '9..14': device resolution in bit
> - or resolution to set in bit
> + or resolution to set in bit
> * '-xx': xx is kernel error when reading the resolution
> * Anything else: do nothing
> +
> Some DS18B20 clones are fixed in 12-bit resolution, so the
> actual resolution is read back from the chip and verified. Error
> is reported if the results differ.
> @@ -65,16 +71,18 @@ Date: May 2020
> Contact: Akira Shimahara <akira215corp@gmail.com>
> Description:
> (RO) return the temperature in 1/1000 degC.
> +
> * If a bulk read has been triggered, it will directly
> - return the temperature computed when the bulk read
> - occurred, if available. If not yet available, nothing
> - is returned (a debug kernel message is sent), you
> - should retry later on.
> + return the temperature computed when the bulk read
> + occurred, if available. If not yet available, nothing
> + is returned (a debug kernel message is sent), you
> + should retry later on.
> * If no bulk read has been triggered, it will trigger
> - a conversion and send the result. Note that the
> - conversion duration depend on the resolution (if
> - device support this feature). It takes 94ms in 9bits
> - resolution, 750ms for 12bits.
> + a conversion and send the result. Note that the
> + conversion duration depend on the resolution (if
> + device support this feature). It takes 94ms in 9bits
> + resolution, 750ms for 12bits.
> +
> Users: any user space application which wants to communicate with
> w1_term device
>
> @@ -86,12 +94,14 @@ Description:
> (RW) return the temperature in 1/1000 degC.
> *read*: return 2 lines with the hexa output data sent on the
> bus, return the CRC check and temperature in 1/1000 degC
> - *write* :
> + *write*:
> +
> * '0' : save the 2 or 3 bytes to the device EEPROM
> - (i.e. TH, TL and config register)
> + (i.e. TH, TL and config register)
> * '9..14' : set the device resolution in RAM
> - (if supported)
> + (if supported)
> * Anything else: do nothing
> +
> refer to Documentation/w1/slaves/w1_therm.rst for detailed
> information.
> Users: any user space application which wants to communicate with
> @@ -103,14 +113,21 @@ Date: May 2020
> Contact: Akira Shimahara <akira215corp@gmail.com>
> Description:
> (RW) trigger a bulk read conversion. read the status
> +
> *read*:
> - * '-1': conversion in progress on at least 1 sensor
> - * '1' : conversion complete but at least one sensor
> + * '-1':
> + conversion in progress on at least 1 sensor
> + * '1' :
> + conversion complete but at least one sensor
> value has not been read yet
> - * '0' : no bulk operation. Reading temperature will
> + * '0' :
> + no bulk operation. Reading temperature will
> trigger a conversion on each device
> - *write*: 'trigger': trigger a bulk read on all supporting
> +
> + *write*:
> + 'trigger': trigger a bulk read on all supporting
> devices on the bus
> +
> Note that if a bulk read is sent but one sensor is not read
> immediately, the next access to temperature on this device
> will return the temperature measured at the time of issue
> @@ -128,14 +145,19 @@ Description:
> reset to default (datasheet) conversion time for a new
> resolution.
>
> - *read*: Actual conversion time in milliseconds. *write*:
> - '0': Set the default conversion time from the datasheet.
> - '1': Measure and set the conversion time. Make a single
> + *read*:
> + Actual conversion time in milliseconds.
> +
> + *write*:
> + * '0':
> + Set the default conversion time from the datasheet.
> + * '1':
> + Measure and set the conversion time. Make a single
> temperature conversion, measure an actual value.
> Increase it by 20% for temperature range. A new
> conversion time can be obtained by reading this
> same attribute.
> - other positive value:
> + * other positive value:
> Set the conversion time in milliseconds.
>
> Users: An application using the w1_term device
> @@ -148,16 +170,21 @@ Description:
> (RW) Control optional driver settings.
> Bit masks to read/write (bitwise OR):
>
> - 1: Enable check for conversion success. If byte 6 of
> + == ============================================================
> + 1 Enable check for conversion success. If byte 6 of
> scratchpad memory is 0xC after conversion, and
> temperature reads 85.00 (powerup value) or 127.94
> (insufficient power) - return a conversion error.
>
> - 2: Enable poll for conversion completion. Generate read cycles
> + 2 Enable poll for conversion completion. Generate read cycles
> after the conversion start and wait for 1's. In parasite
> power mode this feature is not available.
> + == ============================================================
>
> - *read*: Currently selected features.
> - *write*: Select features.
> + *read*:
> + Currently selected features.
> +
> + *write*:
> + Select features.
>
> Users: An application using the w1_term device
> diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> index 3683cb1cdc3d..d6ab34e81b9b 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> @@ -113,8 +113,11 @@ KernelVersion: 5.5
> Contact: Wu Hao <hao.wu@intel.com>
> Description: Read-Only. Read this file to get the name of hwmon device, it
> supports values:
> - 'dfl_fme_thermal' - thermal hwmon device name
> - 'dfl_fme_power' - power hwmon device name
> +
> + ================= =========================
> + 'dfl_fme_thermal' thermal hwmon device name
> + 'dfl_fme_power' power hwmon device name
> + ================= =========================
>
> What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
> Date: October 2019
> @@ -169,8 +172,11 @@ KernelVersion: 5.5
> Contact: Wu Hao <hao.wu@intel.com>
> Description: Read-Only. Read this file to get the policy of hardware threshold1
> (see 'temp1_max'). It only supports two values (policies):
> - 0 - AP2 state (90% throttling)
> - 1 - AP1 state (50% throttling)
> +
> + == ==========================
> + 0 AP2 state (90% throttling)
> + 1 AP1 state (50% throttling)
> + == ==========================
>
> What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
> Date: October 2019
> diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
> index 2cbc660d163b..141834342a4d 100644
> --- a/Documentation/ABI/testing/sysfs-platform-dptf
> +++ b/Documentation/ABI/testing/sysfs-platform-dptf
> @@ -27,12 +27,15 @@ KernelVersion: v4.10
> Contact: linux-acpi@vger.kernel.org
> Description:
> (RO) Display the platform power source
> +
> + ========= ============================
> bits[3:0] Current power source
> - 0x00 = DC
> - 0x01 = AC
> - 0x02 = USB
> - 0x03 = Wireless Charger
> + - 0x00 = DC
> + - 0x01 = AC
> + - 0x02 = USB
> + - 0x03 = Wireless Charger
> bits[7:4] Power source sequence number
> + ========= ============================
>
> What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power
> Date: Jul, 2016
> diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
> index 5aa618987cad..02ae1e9bbfc8 100644
> --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
> +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update
> @@ -8,5 +8,6 @@ Description:
> of 0 and userspace can signal SBL to update firmware,
> on next reboot, by writing a value of 1.
> There are two available states:
> +
> * 0 -> Skip firmware update while rebooting
> * 1 -> Attempt firmware update on next reboot
> diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> index 401d202f478b..e79ca22e2f45 100644
> --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
> @@ -5,10 +5,13 @@ Contact: "Liming Sun <lsun@mellanox.com>"
> Description:
> The Life-cycle state of the SoC, which could be one of the
> following values.
> - Production - Production state and can be updated to secure
> - GA Secured - Secure chip and not able to change state
> - GA Non-Secured - Non-Secure chip and not able to change state
> - RMA - Return Merchandise Authorization
> +
> + ============== =============================================
> + Production Production state and can be updated to secure
> + GA Secured Secure chip and not able to change state
> + GA Non-Secured Non-Secure chip and not able to change state
> + RMA Return Merchandise Authorization
> + ============== =============================================
>
> What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
> Date: Oct 2019
> @@ -25,10 +28,13 @@ KernelVersion: 5.5
> Contact: "Liming Sun <lsun@mellanox.com>"
> Description:
> The source of the boot stream for the next reset. It could be
> - one of the following values.
> - external - boot from external source (USB or PCIe)
> - emmc - boot from the onchip eMMC
> - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
> + one of the following values:
> +
> + =========== ===============================================
> + external boot from external source (USB or PCIe)
> + emmc boot from the onchip eMMC
> + emmc_legacy boot from the onchip eMMC in legacy (slow) mode
> + =========== ===============================================
>
> What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action
> Date: Oct 2019
> @@ -38,11 +44,14 @@ Description:
> Update the source of the boot stream after next reset. It could
> be one of the following values and will be applied after next
> reset.
> - external - boot from external source (USB or PCIe)
> - emmc - boot from the onchip eMMC
> - emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
> - swap_emmc - swap the primary / secondary boot partition
> - none - cancel the action
> +
> + =========== ===============================================
> + external boot from external source (USB or PCIe)
> + emmc boot from the onchip eMMC
> + emmc_legacy boot from the onchip eMMC in legacy (slow) mode
> + swap_emmc swap the primary / secondary boot partition
> + none cancel the action
> + =========== ===============================================
>
> What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
> Date: Oct 2019
> @@ -50,9 +59,12 @@ KernelVersion: 5.5
> Contact: "Liming Sun <lsun@mellanox.com>"
> Description:
> The state of eFuse versions with the following values.
> - InUse - burnt, valid and currently in use
> - Used - burnt and valid
> - Free - not burnt and free to use
> - Skipped - not burnt but not free (skipped)
> - Wasted - burnt and invalid
> - Invalid - not burnt but marked as valid (error state).
> +
> + ======= ===============================================
> + InUse burnt, valid and currently in use
> + Used burnt and valid
> + Free not burnt and free to use
> + Skipped not burnt but not free (skipped)
> + Wasted burnt and invalid
> + Invalid not burnt but marked as valid (error state).
> + ======= ===============================================
> diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
> index 5f60b184a5a5..4439d0644091 100644
> --- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
> +++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
> @@ -39,6 +39,7 @@ Description:
> which affects charging via the special USB PowerShare port
> (marked with a small lightning bolt or battery icon) when in
> low power states:
> +
> - In S0, the port will always provide power.
> - In S0ix, if usb_charge is enabled, then power will be
> supplied to the port when on AC or if battery is > 50%.
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-11-02 06:51    [W:0.389 / U:1.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site