lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] J7200: Add PCIe DT nodes to Enable PCIe
Date
Add DT binding documentation and device tree nodes to enable
PCIe in J7200.

Also included a fix in J721E that fixes the maximum number of
outbound regions. (This can go in 5.11 as it doesn't impact
any of the existing use-cases).

Kishon Vijay Abraham I (8):
dt-bindings: mfd: ti,j721e-system-controller.yaml: Document
"pcie-ctrl"
dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES
arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe
arm64: dts: ti: k3-j721e-main: Fix PCIe maximum outbound regions

.../mfd/ti,j721e-system-controller.yaml | 6 +
.../bindings/pci/ti,j721e-pci-ep.yaml | 10 +-
.../bindings/pci/ti,j721e-pci-host.yaml | 16 ++-
.../dts/ti/k3-j7200-common-proc-board.dts | 38 ++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 119 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 +-
6 files changed, 188 insertions(+), 9 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-11-02 11:13    [W:0.676 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site