lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/bridge: tpd12s015: Fix irq registering in tpd12s015_probe
From
Date
On 2020/11/2 14:57, Tomi Valkeinen wrote:
> On 31/10/2020 09:19, Sam Ravnborg wrote:
>> Hi YueHaibing
>>
>> Thanks for the fix. Appreciated but please update as per comments below.
>>
>> On Sat, Oct 31, 2020 at 11:16:48AM +0800, YueHaibing wrote:
>>> gpiod_to_irq() return negative value in case of error,
>>> the existing code handle negative error codes wrongly.
>>>
>>> Fixes: cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter")
>>> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
>>> ---
>>> drivers/gpu/drm/bridge/ti-tpd12s015.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/ti-tpd12s015.c b/drivers/gpu/drm/bridge/ti-tpd12s015.c
>>> index 514cbf0eac75..a18d5197c16c 100644
>>> --- a/drivers/gpu/drm/bridge/ti-tpd12s015.c
>>> +++ b/drivers/gpu/drm/bridge/ti-tpd12s015.c
>>> @@ -160,7 +160,7 @@ static int tpd12s015_probe(struct platform_device *pdev)
>>>
>>> /* Register the IRQ if the HPD GPIO is IRQ-capable. */
>>> tpd->hpd_irq = gpiod_to_irq(tpd->hpd_gpio);
>>> - if (tpd->hpd_irq) {
>>> + if (tpd->hpd_irq > 0) {
>>> ret = devm_request_threaded_irq(&pdev->dev, tpd->hpd_irq, NULL,
>>> tpd12s015_hpd_isr,
>>> IRQF_TRIGGER_RISING |
>>
>> The current implmentation will skip devm_request_threaded_irq() in case
>> or error - but continue with the rest of the function. So the
>> driver fails to return an error code.
>
> That is intended. If the HPD gpio supports IRQs (gpiod_to_irq returns a valid number), we use the
> IRQ. If it doesn't (gpiod_to_irq returns an error), it gets polled via detect(). Both are ok.
>
> I don't know if the gpiod_to_irq never returning 0 is something we should rely on. The docs say
> gpiod_to_irq returns the irq number or an error, so I think checking for >= 0 matches the docs better.
>

gpiod_to_irq() now never returns 0, see:
https://elixir.bootlin.com/linux/v5.10-rc2/source/drivers/gpio/gpiolib.c#L3183

Also commit 4c37ce8608a8 ("gpio: make gpiod_to_irq() return negative for NO_IRQ") says:

commit 4c37ce8608a8c6521726d4cd1d4f54424e8d095f
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Mon May 2 13:13:10 2016 +0200

gpio: make gpiod_to_irq() return negative for NO_IRQ

If a translation returns zero, that means NO_IRQ, so we
should return an error since the function is documented to
return a negative code on error.

So checking for >0 is enough, my patch is correct.

> Tomi
>

\
 
 \ /
  Last update: 2020-11-02 10:37    [W:0.055 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site