lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v9 2/2] i2c: imx: select I2C_SLAVE by default
Date
From: Biwen Li <biwen.li@nxp.com>

Select I2C_SLAVE by default

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v9:
- none

drivers/i2c/busses/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a4f473ef4e5c..d3d9a61db76e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -675,6 +675,7 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
+ select I2C_SLAVE
help
Say Y here if you want to use the IIC bus controller on
the Freescale i.MX/MXC, Layerscape or ColdFire processors.
--
2.17.1
\
 
 \ /
  Last update: 2020-11-02 09:31    [W:0.092 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site