lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V2] arm64: dts: imx8mp-evk: add CAN support
Date

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2020年11月2日 16:29
> To: Joakim Zhang <qiangqing.zhang@nxp.com>
> Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; festevam@gmail.com;
> dl-linux-imx <linux-imx@nxp.com>; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> mkl@pengutronix.de
> Subject: Re: [PATCH V2] arm64: dts: imx8mp-evk: add CAN support
>
> On Mon, Nov 02, 2020 at 10:16:34AM +0800, Joakim Zhang wrote:
> > Add CAN device node and pinctrl on i.MX8MP evk board.
> >
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> > ---
> > ChangeLogs:
> > V1->V2:
> > * add missing space before '=',
> > fsl,clk-source= /bits/ 8 <0> -> fsl,clk-source = /bits/ 8 <0>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 62
> ++++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 30 ++++++++++
> > 2 files changed, 92 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index 908b92bb4dcd..b10dce8767a4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -33,6 +33,28 @@
> > <0x1 0x00000000 0 0xc0000000>;
> > };
> >
> > + reg_can1_stby: regulator-can1-stby {
> > + compatible = "regulator-fixed";
> > + regulator-name = "can1-stby";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan1_reg>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > + reg_can2_stby: regulator-can2-stby {
> > + compatible = "regulator-fixed";
> > + regulator-name = "can2-stby";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan2_reg>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > reg_usdhc2_vmmc: regulator-usdhc2 {
> > compatible = "regulator-fixed";
> > pinctrl-names = "default";
> > @@ -45,6 +67,20 @@
> > };
> > };
> >
> > +&flexcan1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan1>;
> > + xceiver-supply = <&reg_can1_stby>;
> > + status = "okay";
> > +};
> > +
> > +&flexcan2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan2>;
> > + xceiver-supply = <&reg_can2_stby>;
> > + status = "disabled";/* can2 pin conflict with pdm */ };
> > +
> > &fec {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_fec>;
> > @@ -144,6 +180,32 @@
> > >;
> > };
> >
> > + pinctrl_flexcan1: flexcan1grp {
> > + fsl,pins = <
> > + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
> > + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
> > + >;
> > + };
> > +
> > + pinctrl_flexcan2: flexcan2grp {
> > + fsl,pins = <
> > + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
> > + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
> > + >;
> > + };
> > +
> > + pinctrl_flexcan1_reg: flexcan1reggrp {
> > + fsl,pins = <
> > + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /*
> CAN1_STBY */
> > + >;
> > + };
> > +
> > + pinctrl_flexcan2_reg: flexcan2reggrp {
> > + fsl,pins = <
> > + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154
> /* CAN2_STBY */
> > + >;
> > + };
> > +
> > pinctrl_gpio_led: gpioledgrp {
> > fsl,pins = <
> > MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 479312293036..ecccfbb4f5ad 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -552,6 +552,36 @@
> > status = "disabled";
> > };
> >
> > + flexcan1: can@308c0000 {
> > + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
>
> Undocumented compatible in
> Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

Hi Krzsztof,

Yes, I will resend the patch after below patch goes into mainline. Thanks.
https://www.spinics.net/lists/linux-can/msg04896.html


Best Regards,
Joakim Zhang
> Best regards,
> Krzysztof
>
> > + reg = <0x308c0000 0x10000>;
> > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> > + <&clk IMX8MP_CLK_CAN1_ROOT>;
> > + clock-names = "ipg", "per";
> > + assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> > + assigned-clock-rates = <40000000>;
> > + fsl,clk-source = /bits/ 8 <0>;
> > + fsl,stop-mode = <&gpr 0x10 4>;
> > + status = "disabled";
> > + };
> > +
> > + flexcan2: can@308d0000 {
> > + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> > + reg = <0x308d0000 0x10000>;
> > + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> > + <&clk IMX8MP_CLK_CAN2_ROOT>;
> > + clock-names = "ipg", "per";
> > + assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> > + assigned-clock-rates = <40000000>;
> > + fsl,clk-source = /bits/ 8 <0>;
> > + fsl,stop-mode = <&gpr 0x10 5>;
> > + status = "disabled";
> > + };
> > +
> > crypto: crypto@30900000 {
> > compatible = "fsl,sec-v4.0";
> > #address-cells = <1>;
> > --
> > 2.17.1
> >
\
 
 \ /
  Last update: 2020-11-03 02:24    [W:1.232 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site