lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Additional debug info to aid cacheline analysis
Hi,

On Fri, 30 Oct 2020 11:10:04 +0100
Peter Zijlstra <peterz@infradead.org> wrote:

> On Fri, Oct 30, 2020 at 10:16:49AM +0100, Mark Wielaard wrote:
> > Hi Namhyung,
> >
> > On Fri, Oct 30, 2020 at 02:26:19PM +0900, Namhyung Kim wrote:
> > > On Thu, Oct 8, 2020 at 6:38 PM Mark Wielaard <mark@klomp.org> wrote:
> > > > GCC using -fvar-tracking and -fvar-tracking-assignments is pretty good
> > > > at keeping track of where variables are held (in memory or registers)
> > > > when in the program, even through various optimizations.
> > > >
> > > > -fvar-tracking-assignments is the default with -g -O2.
> > > > Except for the upstream linux kernel code. Most distros enable it
> > > > again, but you do want to enable it by hand when building from the
> > > > upstream linux git repo.
> > >
> > > Please correct me if I'm wrong. This seems to track local variables.
> > > But I'm not sure it's enough for this purpose as we want to know
> > > types of any memory references (not directly from a variable).
> > >
> > > Let's say we have a variable like below:
> > >
> > > struct xxx a;
> > >
> > > a.b->c->d++;
> > >
> > > And we have a sample where 'd' is updated, then how can we know
> > > it's from the variable 'a'? Maybe we don't need to know it, but we
> > > should know it accesses the 'd' field in the struct 'c'.
> > >
> > > Probably we can analyze the asm code and figure out it's from 'a'
> > > and accessing 'd' at the moment. I'm curious if there's a way in
> > > the DWARF to help this kind of work.
> >
> > DWARF does have that information, but it stores it in a way that is
> > kind of opposite to how you want to access it. Given a variable and an
> > address, you can easily get the location where that variable is
> > stored. But if you want to map back from a given (memory) location and
> > address to the variable, that is more work.
>
> The principal idea in this thread doesn't care about the address of the
> variables. The idea was to get the data type and member information from
> the instruction.
>
> So in the above example: a.b->c->d++; what we'll end up with is
> something like:
>
> inc 8(%rax)
>
> Where %rax contains c, and the offset of d in c is 8.

For this simple case, it is possible.

This offset information is stored in the DWARF as a data-structure type
information. (perf-probe uses it to find how to get the given local var's
fields)

So if we do this off-line, I think it is possible if it is recorded with
instruction-pointers. For each place, we can do

- decode instruction and get the access address.
- get var assignment of %rax at that IP.
- get type information of var and find the field from offset.

However, the problem is that if the DWARF has only assignment of "a",
we need to decode the function body. (and usually this happens)

func() {
struct xxx a;
...
a.b->c->d++;
}

In this case, only "a" is the local variable. So DWARF records assignment of
"a", not "b" nor "c" (since those are not a name of variables, just a name
of fields). GCC may generate something like

mov 16(%rsp),%rdx // rdx = a.b
mov 8(%rdx),%rax // rax = b->c
inc 8(%rax) // c->d++

GCC only knows "a" is 0(%rsp), there is no other "assignments". Thus we need
to backtrace the %rax from the hit ip address until known assignment register
appears.

Note that if there is a loop, we have to trace it back too, but it's more hard,

func() {
struct yyy a;
int i;
...
for (i = 0; i < 100; i++)
a.b->c[i]++;
}

In this case, GCC will optimize "i" out and make an end-address.
(This is what GCC -O2 generated)

0000000000001190 <func>:
{
1190: f3 0f 1e fa endbr64
struct yyy a = *_a;
1194: 48 8b 57 10 mov 0x10(%rdi),%rdx
for (i = 0; i < 100; i++)
1198: 48 8d 42 08 lea 0x8(%rdx),%rax
119c: 48 81 c2 98 01 00 00 add $0x198,%rdx
11a3: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
a.b->c[i]++;
11a8: 83 00 01 addl $0x1,(%rax)
for (i = 0; i < 100; i++)
11ab: 48 83 c0 04 add $0x4,%rax
11af: 48 39 d0 cmp %rdx,%rax
11b2: 75 f4 jne 11a8 <func+0x18>
}
11b4: c3 retq

If we ignore the array support, this can be simplified as

1194: 48 8b 57 10 mov 0x10(%rdi),%rdx
1198: 48 8d 42 08 lea 0x8(%rdx),%rax
11a8: 83 00 01 addl $0x1,(%rax)

and maybe able to decode it.

Thank you,

> So what we want to (easily) find for that instruction is c::d.
>
> So given any instruction with a memop (either load or store) we want to
> find: type::member.
>
>


--
Masami Hiramatsu <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2020-11-02 09:27    [W:0.067 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site