lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: media: i2c: Add OV8865 bindings documentation
Hi Paul,

On Fri, Oct 23, 2020 at 07:54:04PM +0200, Paul Kocialkowski wrote:
> This introduces YAML bindings documentation for the OV8865
> image sensor.
>
> Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
> .../bindings/media/i2c/ovti,ov8865.yaml | 124 ++++++++++++++++++
> 1 file changed, 124 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> new file mode 100644
> index 000000000000..807f1a94afae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV8865 Image Sensor Device Tree Bindings
> +
> +maintainers:
> + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> +
> +properties:
> + compatible:
> + const: ovti,ov8865
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: EXTCLK Clock
> +
> + clock-names:
> + items:
> + - const: extclk

Is this needed with a single clock?

And... shouldn't this also come with assigned-clock-rates etc., to set the
clock frequency?

> +
> + dvdd-supply:
> + description: Digital Domain Power Supply
> +
> + avdd-supply:
> + description: Analog Domain Power Supply (internal AVDD is used if missing)
> +
> + dovdd-supply:
> + description: I/O Domain Power Supply
> +
> + powerdown-gpios:
> + maxItems: 1
> + description: Power Down Pin GPIO Control (active low)
> +
> + reset-gpios:
> + maxItems: 1
> + description: Reset Pin GPIO Control (active low)
> +
> + port:
> + type: object
> + description: Input port, connect to a MIPI CSI-2 receiver
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint: true
> +
> + bus-type:
> + const: 4
> +
> + clock-lanes:
> + maxItems: 1

I believe you can drop clock-lanes and bus-type; these are both constants.

I presume the device does not support lane remapping?

Could you also add link-frequencies, to list which frequencies are known to
be good?

Same comments on the other OV sensor bindings.

> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - bus-type
> + - data-lanes
> + - remote-endpoint
> +
> + additionalProperties: false
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - dvdd-supply
> + - dovdd-supply
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/sun8i-a83t-ccu.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ov8865: camera@36 {
> + compatible = "ovti,ov8865";
> + reg = <0x36>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&csi_mclk_pin>;
> +
> + clocks = <&ccu CLK_CSI_MCLK>;
> + clock-names = "extclk";
> +
> + avdd-supply = <&reg_ov8865_avdd>;
> + dovdd-supply = <&reg_ov8865_dovdd>;
> + dvdd-supply = <&reg_ov8865_dvdd>;
> +
> + powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */
> + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
> +
> + port {
> + ov8865_out_mipi_csi2: endpoint {
> + bus-type = <4>; /* MIPI CSI-2 D-PHY */
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> +
> + remote-endpoint = <&mipi_csi2_in_ov8865>;
> + };
> + };
> + };
> + };
> +
> +...

--
Regards,

Sakari Ailus

\
 
 \ /
  Last update: 2020-11-03 00:25    [W:0.069 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site