lkml.org 
[lkml]   [2020]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] selftests/x86/fsgsbase: Fix GS == 1, 2, and 3 tests
Date
Setting GS to 1, 2, or 3 causes a nonsensical part of the IRET
microcode to change GS back to zero on a return from kernel mode to
user mode. The result is that these tests fail randomly depending
on when interrupts happen. Detect when this happens and let the
test pass.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
tools/testing/selftests/x86/fsgsbase.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/x86/fsgsbase.c b/tools/testing/selftests/x86/fsgsbase.c
index 7161cfc2e60b..8c780cce941d 100644
--- a/tools/testing/selftests/x86/fsgsbase.c
+++ b/tools/testing/selftests/x86/fsgsbase.c
@@ -392,8 +392,8 @@ static void set_gs_and_switch_to(unsigned long local,
local = read_base(GS);

/*
- * Signal delivery seems to mess up weird selectors. Put it
- * back.
+ * Signal delivery is quite likely to change a selector
+ * of 1, 2, or 3 back to 0 due to IRET being defective.
*/
asm volatile ("mov %0, %%gs" : : "rm" (force_sel));
} else {
@@ -411,6 +411,14 @@ static void set_gs_and_switch_to(unsigned long local,
if (base == local && sel_pre_sched == sel_post_sched) {
printf("[OK]\tGS/BASE remained 0x%hx/0x%lx\n",
sel_pre_sched, local);
+ } else if (base == local && sel_pre_sched >= 1 && sel_pre_sched <= 3 &&
+ sel_post_sched == 0) {
+ /*
+ * IRET is misdesigned and will squash selectors 1, 2, or 3
+ * to zero. Don't fail the test just because this happened.
+ */
+ printf("[OK]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx because IRET is defective\n",
+ sel_pre_sched, local, sel_post_sched, base);
} else {
nerrs++;
printf("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n",
--
2.28.0
\
 
 \ /
  Last update: 2020-11-02 20:53    [W:0.044 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site