lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/4] MT7621 PCIe PHY
Date
This series adds support for the PCIe PHY found in the Mediatek
MT7621 SoC.

There is also a 'mt7621-pci' driver which is the controller part
which is still in staging and is a client of this phy.

Both drivers have been tested together in a gnubee1 board.

This series are rebased on the top of linux-next:
commit 4e78c578cb98 ("Add linux-next specific files for 20201030")

Changes in v5:
- PATCH 1/4: Recollect Rob's Reviewed-by of bindings.
- PATCH 4/4: Recollect Greg's Acked-by for removing stuff from
staging area.
- Make Vinod's review comments changes in [0]:
* Use FIELD_GET and FIELD_PREP apis and avoid multiple *_VAL and
*_SHIFT custom definitions.
* Remove phy-read and phy-write internal functions and directly
call regmap_read and regmap_write in 'mt7621_phy_rmw'.
* Change some traces from info to debug log level.
* Note that I have maintained 'mt7621_phy_rmw' instead of use
'regmap_update_bits'. This is because in order to get a reliable
boot registers must be written event the contained value in
that register is the same. I have preferred doing in this way
instead of using 'regmap_update_bits_base' passing 'false' for
async and 'true' for the force write. If this way of using
'regmap_update_bits_base' is preferred just let me know.

Changes in v4:
- Bindings moved from txt to yaml so previous Rob's Reviewed-by
is not in the new patch with the yaml file.
- 'phy-cells' property means now if phy is dual-ported.
- Avoid custom 'xlate' function and properly set registers
when the phy is dual ported.
- Add use of 'builtin_platform_driver'.
- Added a patch including myself as maintainer in the
MAINTAINERS file.
- Add a patch removing patch from staging to make easier
the complete inclusion and avoid possible problems might
appear in 'linux-next' if the series are included.

Changes in v3:
- Recollect Rob's Reviewed-by of bindings.
- Make Kishon Vijay suggested changes in v2:
(See https://lkml.org/lkml/2019/4/17/53)
- Kconfig:
* Add depends on COMPILE_TEST
* Select REGMAP_MMIO
- Make use of 'soc_device_attribute' and 'soc_device_match'
- Use regmap mmio API instead of directly 'readl' and 'writel'.
- Use 'platform_get_resource' instead of 'of_address_to_resource'.

Changes in v2:
- Reorder patches to get bindings first in the series.
- Don't use child nodes in the device tree. Use #phy-cells=1 instead.
- Update driver code with new 'xlate' function for the new device tree.
- Minor changes in driver's macros changing some spaces to tabs.

Thanks in advance for your time.

Best regards,
Sergio Paracuellos

[0]: http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2020-November/148864.html

Sergio Paracuellos (4):
dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY
phy: ralink: Add PHY driver for MT7621 PCIe PHY
MAINTAINERS: add MT7621 PHY PCI maintainer
staging: mt7621-pci-phy: remove driver from staging

.../phy}/mediatek,mt7621-pci-phy.yaml | 0
MAINTAINERS | 6 +
drivers/phy/ralink/Kconfig | 8 ++
drivers/phy/ralink/Makefile | 1 +
.../ralink/phy-mt7621-pci.c} | 103 +++++++-----------
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/mt7621-pci-phy/Kconfig | 8 --
drivers/staging/mt7621-pci-phy/Makefile | 2 -
drivers/staging/mt7621-pci-phy/TODO | 4 -
10 files changed, 53 insertions(+), 82 deletions(-)
rename {drivers/staging/mt7621-pci-phy => Documentation/devicetree/bindings/phy}/mediatek,mt7621-pci-phy.yaml (100%)
rename drivers/{staging/mt7621-pci-phy/pci-mt7621-phy.c => phy/ralink/phy-mt7621-pci.c} (76%)
delete mode 100644 drivers/staging/mt7621-pci-phy/Kconfig
delete mode 100644 drivers/staging/mt7621-pci-phy/Makefile
delete mode 100644 drivers/staging/mt7621-pci-phy/TODO

--
2.25.1

\
 
 \ /
  Last update: 2020-11-19 16:47    [W:0.086 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site