lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH 2/2] PCI: Disable Precision Time Measurement during suspend
    On Thu, Nov 19, 2020 at 1:17 AM David E. Box
    <david.e.box@linux.intel.com> wrote:
    >
    > On Intel client platforms that support suspend-to-idle, like Ice Lake,
    > root ports that have Precision Time Management (PTM) enabled can prevent
    > the port from being fully power gated, causing higher power consumption
    > while suspended. To prevent this, after saving the PTM control register,
    > disable the feature. The feature will be returned to its previous state
    > during restore.
    >
    > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361
    > Reported-by: Len Brown <len.brown@intel.com>
    > Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    > Signed-off-by: David E. Box <david.e.box@linux.intel.com>
    > ---
    > drivers/pci/pci.c | 14 +++++++++++++-
    > 1 file changed, 13 insertions(+), 1 deletion(-)
    >
    > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
    > index 6fd4ae910a88..a2b40497d443 100644
    > --- a/drivers/pci/pci.c
    > +++ b/drivers/pci/pci.c
    > @@ -21,6 +21,7 @@
    > #include <linux/module.h>
    > #include <linux/spinlock.h>
    > #include <linux/string.h>
    > +#include <linux/suspend.h>
    > #include <linux/log2.h>
    > #include <linux/logic_pio.h>
    > #include <linux/pm_wakeup.h>
    > @@ -1543,7 +1544,7 @@ static void pci_save_ptm_state(struct pci_dev *dev)
    > {
    > int ptm;
    > struct pci_cap_saved_state *save_state;
    > - u16 *cap;
    > + u16 *cap, ctrl;
    >
    > if (!pci_is_pcie(dev))
    > return;
    > @@ -1560,6 +1561,17 @@ static void pci_save_ptm_state(struct pci_dev *dev)
    >
    > cap = (u16 *)&save_state->cap.data[0];
    > pci_read_config_word(dev, ptm + PCI_PTM_CTRL, cap);
    > +
    > + /*
    > + * On Intel systems that support suspend-to-idle, additional
    > + * power savings can be gained by disabling PTM on root ports,
    > + * as this allows the port to enter a deeper pm state.

    I would say "There are systems (for example, ...) where the power
    drawn while suspended can be significantly reduced by disabling PTM on
    PCIe root ports, as this allows the port to enter a lower-power PM
    state and the SoC to reach a lower-power idle state as a whole".

    > + */
    > + if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&

    AFAICS the target sleep state doesn't matter here, so I'd skip the
    check above, but otherwise it LGTM.

    > + pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
    > + ctrl = *cap & ~(PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT);
    > + pci_write_config_word(dev, ptm + PCI_PTM_CTRL, ctrl);
    > + }
    > }
    >
    > static void pci_restore_ptm_state(struct pci_dev *dev)
    > --

    \
     
     \ /
      Last update: 2020-11-19 13:03    [W:2.998 / U:0.164 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site