lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] docs: ACPI: enumeration: add PCI hierarchy representation
On Thu, Nov 19, 2020 at 11:12:33AM +0100, Flavio Suligoi wrote:

Thank you very much for nice piece of documentation!
My comments below.

> For "fixed" PCI devices, such as chips directly soldered
> on the main board (ethernet, wi-fi, serial ports, etc.),

Wi-Fi

> it is possible to find an ACPI enumeration.
>
> This allows to add useful properties to these devices.
> Just for an example: the property "gpio-line-names" can be
> added to the pins of a GPIO expander on the PCI bus.
>
> In order to find the ACPI name of a PCI device , it's necessary

No space before comma.

> to disassemble the BIOS ACPI tables (in particular the DSDT)
> and also to analyze the PCI bus topology of the board.
>
> This patch, with a practical example, show how to do this.
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> .../firmware-guide/acpi/enumeration.rst | 180 ++++++++++++++++++
> 1 file changed, 180 insertions(+)
>
> diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst
> index c13fee8b02ba..b08431a93cf5 100644
> --- a/Documentation/firmware-guide/acpi/enumeration.rst
> +++ b/Documentation/firmware-guide/acpi/enumeration.rst
> @@ -461,3 +461,183 @@ Otherwise, the _DSD itself is regarded as invalid and therefore the "compatible"
> property returned by it is meaningless.
>
> Refer to :doc:`DSD-properties-rules` for more information.
> +
> +PCI hierarchy representation
> +============================
> +
> +Sometimes could be useful to enumerate a PCI device, knowing its position on the
> +PCI bus.
> +
> +For example, some systems use PCI devices soldered directly on the mother board,
> +in a fixed position (ethernet, wi-fi, serial ports, etc.). In this conditions it

Wi-Fi

> +is possible to refer to these PCI devices knowing their position on the PCI bus
> +topology.
> +
> +To identify a PCI device, a complete hierarchical description is required, from
> +the chipset root port to the final device, through all the intermediate
> +bridges/switches of the board.
> +
> +For example, let us assume to have a system with a PCIe serial port, an
> +Exar XR17V3521, soldered on the main board. This UART chip also includes
> +16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
> +In this case, the ``lspci`` output for this component is::
> +
> + 07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03)
> +
> +The complete ``lspci`` output (manually reduced in length) is::
> +
> + root@debian:~# lspci
> + 00:00.0 Host bridge: Intel Corp... Host Bridge (rev 0d)
> + 00:02.0 VGA compatible controller: Intel Corporation Device 5a85 (rev 0d)
> + 00:0e.0 Audio device: Intel Corp... Audio Cluster (rev 0d)
> + 00:0f.0 Communication controller: Intel Corp... Trusted Execution Engine (rev 0d)
> + 00:12.0 SATA controller: Intel Corp... SATA AHCI Controller (rev 0d)
> + 00:13.0 PCI bridge: Intel Corp... PCI Express Port A #1 (rev fd)
> + 00:13.1 PCI bridge: Intel Corp... PCI Express Port A #2 (rev fd)
> + 00:13.2 PCI bridge: Intel Corp... PCI Express Port A #3 (rev fd)
> + 00:14.0 PCI bridge: Intel Corp... PCI Express Port B #1 (rev fd)
> + 00:14.1 PCI bridge: Intel Corp... PCI Express Port B #2 (rev fd)
> + 00:15.0 USB controller: Intel Corp... USB xHCI (rev 0d)
> + 00:16.0 Signal processing controller: Intel Corp... I2C Controller #1 (rev 0d)
> + 00:16.1 Signal processing controller: Intel Corp... I2C Controller #2 (rev 0d)
> + 00:19.0 Signal processing controller: Intel Corp... SPI Controller #1 (rev 0d)
> + 00:19.1 Signal processing controller: Intel Corp... SPI Controller #2 (rev 0d)
> + 00:19.2 Signal processing controller: Intel Corp... SPI Controller #3 (rev 0d)
> + 00:1f.0 ISA bridge: Intel Corp... Low Pin Count Interface (rev 0d)
> + 00:1f.1 SMBus: Intel Corp... SMBus Controller (rev 0d)
> + 01:00.0 Ethernet controller: Intel Corp... I210 Gigabit Network Connection (rev 03)
> + 02:00.0 Ethernet controller: Intel Corp... I210 Gigabit Network Connection (rev 03)
> + 04:00.0 Ethernet controller: Intel Corp... I210 Gigabit Network Connection (rev 03)
> + 05:00.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
> + 06:01.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
> + 06:02.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
> + 06:03.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
> + 07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03) <-- Exar
> + 08:00.0 Ethernet controller: Intel Corp... I210 Gigabit Network Connection (rev 03)
> + root@debian:~#

At least here, I would rather drop unrelated lines (except bridges, serial controller).

Like:

00:00.0 Host bridge: Intel Corp... Host Bridge (rev 0d)
...
00:14.0 PCI bridge: Intel Corp... PCI Express Port B #1 (rev fd)
00:14.1 PCI bridge: Intel Corp... PCI Express Port B #2 (rev fd)
...
05:00.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
06:01.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
06:02.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
06:03.0 PCI bridge: Pericom Semiconductor Device 2404 (rev 05)
07:00.0 Serial controller: Exar Corp. XR17V3521 Dual PCIe UART (rev 03) <-- Exar
...

> +The bus topology is::
> +
> + root@debian:~# lspci -t
> + -[0000:00]-+-00.0
> + +-02.0
> + +-0e.0
> + +-0f.0
> + +-12.0
> + +-13.0-[01]----00.0
> + +-13.1-[02]----00.0
> + +-13.2-[03]--
> + +-14.0-[04]----00.0
> + +-14.1-[05-09]----00.0-[06-09]--+-01.0-[07]----00.0 <-- Exar
> + | +-02.0-[08]----00.0
> + | \-03.0-[09]--
> + +-15.0
> + +-16.0
> + +-16.1
> + +-19.0
> + +-19.1
> + +-19.2
> + +-1f.0
> + \-1f.1

And possible here cut unneeded branches.

> + root@debian:~#

This is not needed.

> +To describe this Exar device on the PCI bus, we must start from the ACPI name
> +of the chipset bridge (also called "root port") with address::
> +
> + Bus: 0 - Device: 14 - Function: 1
> +
> +To find this information is necessary disassemble the BIOS ACPI tables, in
> +particular the DSDT (see also [2])::

> + cd /sys/firmware/acpi
> + cp -a tables/ ~
> + cd ~/tables/

acpidump followed by acpixtract from ACPI tools is better to advertise.

> + find . -type f -exec mv {} {}.aml \;

Unnecessary step. But I think you wanted to have it to distinguish sources and
binaries in the text below.

> + iasl -e SSDT?.* -d DSDT.aml
> +
> +Now, in the DSDT.dsl, we have to search the device whose address is related to
> +0x14 (device) and 0x01 (function). In this case we can find the following
> +device::
> +
> + Scope (_SB.PCI0)
> + {
> + ... other definitions follow ...
> + Device (RP02)
> + {
> + Method (_ADR, 0, NotSerialized) // _ADR: Address
> + {
> + If ((RPA2 != Zero))
> + {
> + Return (RPA2) /* \RPA2 */
> + }
> + Else
> + {
> + Return (0x00140001)
> + }
> + }
> + ... other definitions follow ...
> +
> +and the _ADR method [3] returns exactly the device/function couple that
> +we are looking for. With this information and analyzing the above ``lspci``
> +output (both the devices list and the devices tree), we can write the following
> +ACPI description for the Exar PCIe UART, also adding the list of its GPIO line
> +names::
> +
> + Scope (_SB.PCI0.RP02)
> + {
> + Device (BRG1) //Bridge
> + {
> + Name (_ADR, 0x0000)
> +
> + Device (BRG2) //Bridge
> + {
> + Name (_ADR, 0x00010000)
> +
> + Device (EXAR)
> + {
> + Name (_ADR, 0x0000)
> +
> + Name (_DSD, Package ()
> + {
> + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> + Package ()
> + {
> + Package ()
> + {
> + "gpio-line-names",
> + Package ()
> + {
> + "mode_232",
> + "mode_422",
> + "mode_485",
> + "misc_1",
> + "misc_2",
> + "misc_3",
> + "",
> + "",
> + "aux_1",
> + "aux_2",
> + "aux_3",
> + }
> + }
> + }
> + })
> + }
> + }
> + }
> + }
> +
> +The location "_SB.PCI0.RP02" is obtained by the above investigation in the
> +DSDT.dsl table, whereas the device names "BRG1", "BRG2" and "EXAR" are
> +created analyzing the position of the Exar UART in the PCI bus topology.
> +
> +References
> +==========
> +
> +[1] Documentation/firmware-guide/acpi/gpio-properties.rst
> +
> +[2] Documentation/firmware-guide/acpi/method-customizing.rst
> +
> +[3] ACPI Specifications, Version 6.3 - Paragraph 6.1.1 _ADR Address)
> + https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf,
> + referenced 2020-11-18

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-11-19 12:11    [W:0.281 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site