lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: fsi: Add P10 OCC device documentation
Date
From: Eddie James <eajames@linux.ibm.com>

Add the P10 compatible string.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
index 99ca9862a586..e73358075a90 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
@@ -1,13 +1,13 @@
-Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
----------------------------------------------------------------------
+Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
+-----------------------------------------------------------------------------

-This is the binding for the P9 On-Chip Controller accessed over FSI from a
-service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
+a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE fifo.
+through the SBE FIFO.

Required properties:
- - compatible = "ibm,p9-occ"
+ - compatible = "ibm,p9-occ" or "ibm,p10-occ"

Examples:

--
2.29.2
\
 
 \ /
  Last update: 2020-11-20 02:07    [W:0.071 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site