Messages in this thread Patch in this message | | | From | rentao.bupt@gmail ... | Subject | [PATCH v3 2/2] docs: hwmon: Document max127 driver | Date | Thu, 19 Nov 2020 09:53:24 -0800 |
| |
From: Tao Ren <rentao.bupt@gmail.com>
Add documentation for the max127 hardware monitoring driver.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com> --- Changes in v3: - no code change. xdp maintainers were removed from to/cc list. Changes in v2: - add more description for min/max sysfs nodes. - convert values from volt to millivolt in the document.
Documentation/hwmon/index.rst | 1 + Documentation/hwmon/max127.rst | 45 ++++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100644 Documentation/hwmon/max127.rst
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 408760d13813..0a07b6000c20 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -111,6 +111,7 @@ Hardware Monitoring Kernel Drivers ltc4245 ltc4260 ltc4261 + max127 max16064 max16065 max1619 diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst new file mode 100644 index 000000000000..dc192dd9c37c --- /dev/null +++ b/Documentation/hwmon/max127.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver max127 +==================== + +Author: + + * Tao Ren <rentao.bupt@gmail.com> + +Supported chips: + + * Maxim MAX127 + + Prefix: 'max127' + + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf + +Description +----------- + +The MAX127 is a multirange, 12-bit data acquisition system (DAS) providing +8 analog input channels that are independently software programmable for +a variety of ranges. The available ranges are {0,5V}, {0,10V}, {-5,5V} +and {-10,10V}. + +The MAX127 features a 2-wire, I2C-compatible serial interface that allows +communication among multiple devices using SDA and SCL lines. + +Sysfs interface +--------------- + + ============== ============================================================== + in[0-7]_input The input voltage (in mV) of the corresponding channel. + RO + + in[0-7]_min The lower input limit (in mV) for the corresponding channel. + ADC range and LSB will be updated when the limit is changed. + For the MAX127, it will be adjusted to -10000, -5000, or 0. + RW + + in[0-7]_max The higher input limit (in mV) for the corresponding channel. + ADC range and LSB will be updated when the limit is changed. + For the MAX127, it will be adjusted to 0, 5000, or 10000. + RW + ============== ============================================================== -- 2.17.1
| |