lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] dt-bindings: panel: Add bindings for MRB2801
Date
From: Mikhail Durnev <mikhail_durnev@mentor.com>

Add binding for Ronbo MRB2801 display module.

This binding is for display panels using an Ilitek ILI9341 controller in
parallel mode.

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
---
.../devicetree/bindings/display/ronbo,mrb2801.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/ronbo,mrb2801.txt

diff --git a/Documentation/devicetree/bindings/display/ronbo,mrb2801.txt b/Documentation/devicetree/bindings/display/ronbo,mrb2801.txt
new file mode 100644
index 0000000..db1a861e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ronbo,mrb2801.txt
@@ -0,0 +1,42 @@
+MRB2801 display panel
+
+This binding is for display panels using an Ilitek ILI9341 controller in
+parallel mode.
+
+Required properties:
+- compatible: "ronbo,mrb2801"
+- dc-gpios: D/C pin
+- wr-gpios: W/R pin
+- db-gpios: 8 or 16 DB pins
+- reset-gpios: Reset pin
+- wr-up-down-delays: Delays in ns for changing W/R from down to up and from up to down
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ mrb2801{
+ compatible = "ronbo,mrb2801";
+ db-gpios = <&gpio 17 0>, /* DB0 */
+ <&gpio 18 0>, /* DB1 */
+ <&gpio 27 0>, /* DB2 */
+ <&gpio 22 0>, /* DB3 */
+ <&gpio 23 0>, /* DB4 */
+ <&gpio 24 0>, /* DB5 */
+ <&gpio 25 0>, /* DB6 */
+ <&gpio 4 0>, /* DB7 */
+ <&gpio 14 0>, /* DB8 */
+ <&gpio 15 0>, /* DB9 */
+ <&gpio 5 0>, /* DB10 */
+ <&gpio 6 0>, /* DB11 */
+ <&gpio 13 0>, /* DB12 */
+ <&gpio 19 0>, /* DB13 */
+ <&gpio 26 0>, /* DB14 */
+ <&gpio 12 0>; /* DB15 */
+ dc-gpios = <&gpio 16 0>; /* D/C */
+ wr-gpios = <&gpio 20 0>; /* W/R */
+ wr-up-down-delays = <10 51>;
+ reset-gpios = <&gpio 21 0>; /* RST */
+ backlight = <&backlight>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-11-18 08:38    [W:0.048 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site