lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH] perf session: Fixup timestamp for ordered events
From
Date
On 18/11/20 1:43 pm, Leo Yan wrote:
> Hi Adrian,
>
> On Wed, Nov 18, 2020 at 01:15:32PM +0200, Adrian Hunter wrote:
>> On 18/11/20 12:55 pm, Leo Yan wrote:
>>> Perf tool relies on MMAP/MMAP2 events to prepare DSO maps, it allocates
>>> DSO maps for MMAP/MMAP2 events which is used for parsing symbol. Thus,
>>> during the recording, perf tool implictly expects the MMAP/MMAP2 events
>>> should arrive before AUX event,
>>
>> No it doesn't. There is an index and queues to queue PERF_RECORD_AUXTRACE
>> events in advance so that they can be processed in time order.
>>
>> in other words, MMAP/MMAP2's timestamp
>>> should less than AUX event's timestamp, and the MMAP/MMAP2 events will
>>> be added into the front of ordered event list; this can allow the DSO
>>> maps to be prepared and can be consumed when process AUX event.
>>>
>>> See the function perf_evlist__prepare_workload(), though it uses pipes
>>> to handshake before perf process (the parent process) and forked process
>>> for the profiled program, it cannot promise the timing between
>>> MMAP/MMAP2 events and AUX event.
>>>
>>> On Arm Juno board, the AUX event can be observed to arrive ahead than
>>> MMAP2 event, with the command:
>>>
>>> perf record -e cs_etm/@tmc_etr0/ -S -- dd if=/dev/zero of=/dev/null
>>>
>>> The follow diagram depicts the flow for how the AUX event is arriving
>>> ahead than MMAP2 event:
>>>
>>> T1: T3: T4:
>>> perf process Open PMU device Perf is scheduled out;
>>> invoke perf_aux_output_end()
>>> and generate AUX event
>>> ^ ^ ^
>>> | | |
>>> CPU0 ---------------------------------------------------> (T)
>>> \
>>> \ Forked process is placed on another CPU
>>> V
>>> CPU1 ---------------------------------------------------> (T)
>>> | |
>>> V V
>>> T2: T5:
>>> Invoke execvp() for profiled Record MMAP2 event
>>> program
>>
>> I don't understand. An MMAP at T5 cannot affect data recorded before T5
>> (e.g. T4).
>> Are you saying the timestamps from different CPUs are not in time order? Ot
>> are you saying the data is actually recorded after T5?
>
> Here refers to the later one.
>
> I observed the PMU device is opened and closed for multiple times, so
> the AUX events and MMAP2 events are interleave with each other. Below
> is the dumping with debugging option "--debug ordered-events=1" (and I
> added code for printing out event type value).
>
> When perf tool starts to decode the trace data for the first AUX event
> (its timestamp is 160.767623) and try to synthesize samples, it doesn't
> give chance for handling the sequential MMAP2 events (ts: 160.770223,
> 160.770451, 160.773111).
>
> [ 160.765623] queue_event nr_events 1
> [ 160.765623] new event on queue: type=12
> [ 160.765714] queue_event nr_events 2
> [ 160.765714] new event on queue: type=3
> [ 160.765822] queue_event nr_events 3
> [ 160.765822] new event on queue: type=10 ==> MMAP2 event
> [ 160.766180] queue_event nr_events 4
> [ 160.766180] new event on queue: type=14
> [ 160.767623] queue_event nr_events 5
> [ 160.767623] new event on queue: type=11 ==> AUX event
> [ 160.769710] queue_event nr_events 6
> [ 160.769710] new event on queue: type=12
> [ 160.769762] queue_event nr_events 7
> [ 160.769762] new event on queue: type=14
> [ 160.769810] queue_event nr_events 8
> [ 160.769810] new event on queue: type=14
> [ 160.769943] queue_event nr_events 9
> [ 160.769943] new event on queue: type=11 ==> AUX event
> [ 160.770028] queue_event nr_events 10
> [ 160.770028] new event on queue: type=12
> [ 160.770073] queue_event nr_events 11
> [ 160.770073] new event on queue: type=14
> [ 160.770223] queue_event nr_events 12
> [ 160.770223] new event on queue: type=10 ==> MMAP2 event
> [ 160.770451] queue_event nr_events 13
> [ 160.770451] new event on queue: type=10 ==> MMAP2 event
> [ 160.770628] queue_event nr_events 14
> [ 160.770628] new event on queue: type=14
> [ 160.771650] queue_event nr_events 15
> [ 160.771650] new event on queue: type=11 ==> AUX event
> [ 160.771752] queue_event nr_events 16
> [ 160.771752] new event on queue: type=12
> [ 160.771798] queue_event nr_events 17
> [ 160.771798] new event on queue: type=14
> [ 160.773111] queue_event nr_events 18
> [ 160.773111] new event on queue: type=10 ==> MMAP2 event
> [ 160.782613] queue_event nr_events 19
> [ 160.782613] new event on queue: type=14
>
> Thanks for the reviewing,
>
> Leo
>

When you say AUX event, do you mean PERF_RECORD_AUX or PERF_RECORD_AUXTRACE?

The kernel creates PERF_RECORD_AUX and the data range aux_offset/aux_size
should be for things prior to the sample time.

perf tool creates PERF_RECORD_AUXTRACE when copying data out of the aux
area. PERF_RECORD_AUXTRACE does not have a timestamp and can contain data
corresponding to several PERF_RECORD_AUX. Data is queued based on
PERF_RECORD_AUXTRACE because that is what the data is attached to i.e. one
buffer can contain data from several PERF_RECORD_AUX events.

If you are processing data based on PERF_RECORD_AUX timestamp then you need
to pay attention to the offset. PERF_RECORD_AUX gives you
aux_offset/aux_size and auxtrace_buffer (which may contain data from several
PERF_RECORD_AUX) gives you offset/size.


>>> In this scenario, the perf main process runs on CPU0 and the profiled
>>> program (which is forked child process) runs on CPU1. The main process
>>> opens PMU device for AUX trace (T3) and it will generate AUX event until
>>> the perf process is scheduled out (T4); the profiled program will be
>>> launched by execvp() (T2) and later will record MMAP event for memory
>>> mapping (T5).
>>>
>>> Usually, the AUX event will be later than MMAP2 event, but on the Arm
>>> Juno platform, it has chance that AUX event occurs prior to MMAP2 event
>>> with two reasons:
>>>
>>> - Arm Juno platform is big.LITTLE architecture, so CPU0 is big CPU and
>>> CPU1 is LITTLE CPU, the performance between big CPU and LITTLE CPU is
>>> significant, this gives chance for the perf main process to run much
>>> faster than the profiled program;
>>>
>>> - In the kernel, the RT thread (like kernel's CPUFreq thread) has chance
>>> to preempt perf main thread, so when the perf main thread is
>>> switched out, the AUX event will be generated and it might be early
>>> than profiled program's MMAP2 event.
>>>
>>> To fix this issue, this patch records the first AUX event's timestamp
>>> into 'aux_timestamp', if find any MMAP/MMAP2 event is late coming, it
>>> fixes up the MMAP/MMAP2 events' timestamp as 'aux_timestamp-1', so the
>>> MMAP/MMAP2 event will be inserted into ordered list ahead than AUX event
>>> and also will be handled before AUX event.
>>>
>>> Signed-off-by: Leo Yan <leo.yan@linaro.org>
>>> ---
>>> tools/perf/util/session.c | 25 +++++++++++++++++++++++++
>>> 1 file changed, 25 insertions(+)
>>>
>>> diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
>>> index 098080287c68..1aa54941bf81 100644
>>> --- a/tools/perf/util/session.c
>>> +++ b/tools/perf/util/session.c
>>> @@ -1753,11 +1753,36 @@ static s64 perf_session__process_event(struct perf_session *session,
>>>
>>> if (tool->ordered_events) {
>>> u64 timestamp = -1ULL;
>>> + static u64 aux_timestamp = -1ULL;
>>>
>>> ret = perf_evlist__parse_sample_timestamp(evlist, event, &timestamp);
>>> if (ret && ret != -1)
>>> return ret;
>>>
>>> + /*
>>> + * Cache the first AUX event's timestamp into 'aux_timestamp',
>>> + * which is used to fixup MMAP/MMAP2's timestamp.
>>> + */
>>> + if ((event->header.type == PERF_RECORD_AUX) &&
>>> + (aux_timestamp == -1ULL))
>>> + aux_timestamp = timestamp;
>>> +
>>> + /*
>>> + * If the AUX event arrives prior to MMAP/MMAP2 events, it's
>>> + * possible to have no chance to create DSOs when decode AUX
>>> + * trace data, thus the symbol cannot be parsed properly.
>>> + * To allow the DSOs are prepared before process AUX event,
>>> + * fixup the MMAP/MMAP2 events' timestamp to be prior to any
>>> + * AUX event's timestamp, so MMAP/MMAP2 events will be
>>> + * handled ahead and the DSO map will be prepared before AUX
>>> + * event handling.
>>> + */
>>> + if (event->header.type == PERF_RECORD_MMAP2 ||
>>> + event->header.type == PERF_RECORD_MMAP) {
>>> + if (timestamp > aux_timestamp)
>>> + timestamp = aux_timestamp - 1;
>>> + }
>>> +
>>> ret = perf_session__queue_event(session, event, timestamp, file_offset);
>>> if (ret != -ETIME)
>>> return ret;
>>>
>>

\
 
 \ /
  Last update: 2020-11-18 17:00    [W:0.785 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site