lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] Add missing nodes and refresh defconfig for Ingenic SoCs based boards.
On Tue, Nov 17, 2020 at 01:55:06AM +0800, 周琰杰 (Zhou Yanjie) wrote:
> v1->v2:
> 1.Add the otg_power node for otg_phy's vcc_supply.
> 2.Move assigned-clocks in the otg node into the cgu node.
> 3.Move the position of the SSI node.
> 4.Select CONFIG_JZ4780_EFUSE as default.
>
> 周琰杰 (Zhou Yanjie) (2):
> MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards.
> MIPS: Ingenic: Refresh defconfig for Ingenic SoCs based boards.
>
> arch/mips/boot/dts/ingenic/ci20.dts | 45 +++++++++++++++++++--
> arch/mips/boot/dts/ingenic/cu1000-neo.dts | 62 ++++++++++++++++++++++++++---
> arch/mips/boot/dts/ingenic/cu1830-neo.dts | 66 ++++++++++++++++++++++++++++---
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 45 ++++++++++++++++++++-
> arch/mips/boot/dts/ingenic/x1000.dtsi | 56 +++++++++++++++++++++++++-
> arch/mips/boot/dts/ingenic/x1830.dtsi | 58 ++++++++++++++++++++++++++-
> arch/mips/configs/ci20_defconfig | 15 ++++++-
> arch/mips/configs/cu1000-neo_defconfig | 28 ++++++++++---
> arch/mips/configs/cu1830-neo_defconfig | 32 +++++++++++----
> 9 files changed, 374 insertions(+), 33 deletions(-)

series applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2020-11-18 11:27    [W:0.045 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site