lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5] dt-bindings: soc: imx: Add binding doc for spba bus
Date
Add binding doc for fsl,spba-bus.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
make dt_binding_check -j8 |grep spba
DTEX Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dts
DTC Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dt.yaml
CHECK Documentation/devicetree/bindings/bus/fsl,spba-bus.example.dt.yaml

V5: Rebase on 5.10-rc2 to be able to check yaml
Add Reg entry

V4: Remove an accidental makefile change
Move type:object under additional properties

V3: Rebase sample from aips-bus example
Split off from series adding i.MX8M Nano functions to reduce noise

V2: Attempted to update yaml from feedback

diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 000000000000..e9f77ecae3d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+ - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+ A simple bus enabling access to shared peripherals.
+
+ The "spba-bus" follows the "simple-bus" set of properties, as
+ specified in the Devicetree Specification. It is an extension of
+ "simple-bus" because the SDMA controller uses this compatible flag to
+ determine which peripherals are available to it and the range over which
+ the SDMA can access. There are no special clocks for the bus, because
+ the SDMA controller itself has its interrupt, and clock assignments.
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: fsl,spba-bus
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^bus(@[0-9a-f]+)?$"
+
+ compatible:
+ items:
+ - const: fsl,spba-bus
+ - const: simple-bus
+
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+ reg:
+ maxItems: 1
+
+ ranges: true
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - reg
+ - ranges
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ bus@30000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x100000>;
+ ranges;
+ };
--
2.25.1
\
 
 \ /
  Last update: 2020-11-19 00:08    [W:0.117 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site