lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/3] iio: adc: ad7887: convert driver to full DT probing
On Tue, 17 Nov 2020 11:01:11 +0000
Jonathan Cameron <Jonathan.Cameron@Huawei.com> wrote:

> On Tue, 17 Nov 2020 09:52:53 +0200
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
>
> > This change removes the SPI device table, adds an OF device table instead.
> > This should also be usable for ACPI via PRP0001.
> >
> > This device is usually probed via device-tree, so it makes more sense to
> > use the OF device table.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> So, we've had a few cases of having to put the device_id table
> back again recently.
> https://lore.kernel.org/linux-iio/20201101152613.2c37581a@archlinux/
>
> They tend to be due to greybus doing it's probing in yet another fashion.
> So far they've been all i2c devices, but I kind of assume it does the same for spi.
> https://elixir.bootlin.com/linux/latest/source/drivers/staging/greybus/spilib.c#L437
>
> How device_get_match_data() plays with that I'm not sure. It probably
> doesn't right now given swnode doesn't have a device_get_match_data() callback.
>
> https://elixir.bootlin.com/linux/latest/source/drivers/base/swnode.c#L539
>
> So after all that I think I've argued myself around to thinking what you have
> here is fine. If someone wants to support this via a swnode then they can
> figure out how to make that work.
>
> +CC Vaishnav and Andy for their input.
>
> Otherwise looks fine to me.

Having said that.... Why are we going through this dance for driver with
only one compatible? Are there other parts on their way?
If not, perhaps we should just rip out the matching code entirely in
the interests of simplicity.

Jonathan

>
> Thanks,
>
> Jonathan
>
>
> > ---
> > drivers/iio/adc/ad7887.c | 23 +++++++++++++++--------
> > 1 file changed, 15 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
> > index 06f684c053a0..4f68a1b17ec8 100644
> > --- a/drivers/iio/adc/ad7887.c
> > +++ b/drivers/iio/adc/ad7887.c
> > @@ -40,6 +40,7 @@ enum ad7887_channels {
> >
> > /**
> > * struct ad7887_chip_info - chip specifc information
> > + * @name: the name of the part
> > * @int_vref_mv: the internal reference voltage
> > * @channels: channels specification
> > * @num_channels: number of channels
> > @@ -47,6 +48,7 @@ enum ad7887_channels {
> > * @num_dual_channels: number of channels in dual mode
> > */
> > struct ad7887_chip_info {
> > + const char *name;
> > u16 int_vref_mv;
> > const struct iio_chan_spec *channels;
> > unsigned int num_channels;
> > @@ -218,6 +220,7 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
> > * More devices added in future
> > */
> > [ID_AD7887] = {
> > + .name = "ad7887",
> > .channels = ad7887_channels,
> > .num_channels = ARRAY_SIZE(ad7887_channels),
> > .dual_channels = ad7887_dual_channels,
> > @@ -239,12 +242,17 @@ static void ad7887_reg_disable(void *data)
> >
> > static int ad7887_probe(struct spi_device *spi)
> > {
> > + const struct ad7887_chip_info *info;
> > struct ad7887_state *st;
> > struct iio_dev *indio_dev;
> > bool dual_mode;
> > uint8_t mode;
> > int ret;
> >
> > + info = device_get_match_data(&spi->dev);
> > + if (!info)
> > + return -ENODEV;
> > +
> > indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> > if (indio_dev == NULL)
> > return -ENOMEM;
> > @@ -269,13 +277,12 @@ static int ad7887_probe(struct spi_device *spi)
> > return ret;
> > }
> >
> > - st->chip_info =
> > - &ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data];
> > + st->chip_info = info;
> >
> > spi_set_drvdata(spi, indio_dev);
> > st->spi = spi;
> >
> > - indio_dev->name = spi_get_device_id(spi)->name;
> > + indio_dev->name = st->chip_info->name;
> > indio_dev->info = &ad7887_info;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > @@ -336,18 +343,18 @@ static int ad7887_probe(struct spi_device *spi)
> > return devm_iio_device_register(&spi->dev, indio_dev);
> > }
> >
> > -static const struct spi_device_id ad7887_id[] = {
> > - {"ad7887", ID_AD7887},
> > - {}
> > +static const struct of_device_id ad7887_of_match[] = {
> > + { .compatible = "adi,ad7887", .data = &ad7887_chip_info_tbl[ID_AD7887] },
> > + { }
> > };
> > -MODULE_DEVICE_TABLE(spi, ad7887_id);
> > +MODULE_DEVICE_TABLE(of, ad7887_of_match);
> >
> > static struct spi_driver ad7887_driver = {
> > .driver = {
> > .name = "ad7887",
> > + .of_match_table = ad7887_of_match,
> > },
> > .probe = ad7887_probe,
> > - .id_table = ad7887_id,
> > };
> > module_spi_driver(ad7887_driver);
> >
>

\
 
 \ /
  Last update: 2020-11-17 12:10    [W:0.104 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site