lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] rtc: pcf8523: use BIT
Date
Use the BIT macro to define register bits.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-pcf8523.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
index d5f913cb2ec9..5e1e7b2a8c9a 100644
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -12,18 +12,18 @@
#define DRIVER_NAME "rtc-pcf8523"

#define REG_CONTROL1 0x00
-#define REG_CONTROL1_CAP_SEL (1 << 7)
-#define REG_CONTROL1_STOP (1 << 5)
+#define REG_CONTROL1_CAP_SEL BIT(7)
+#define REG_CONTROL1_STOP BIT(5)

#define REG_CONTROL3 0x02
-#define REG_CONTROL3_PM_BLD (1 << 7) /* battery low detection disabled */
-#define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
-#define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
+#define REG_CONTROL3_PM_BLD BIT(7) /* battery low detection disabled */
+#define REG_CONTROL3_PM_VDD BIT(6) /* switch-over disabled */
+#define REG_CONTROL3_PM_DSM BIT(5) /* direct switching mode */
#define REG_CONTROL3_PM_MASK 0xe0
-#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */
+#define REG_CONTROL3_BLF BIT(2) /* battery low bit, read-only */

#define REG_SECONDS 0x03
-#define REG_SECONDS_OS (1 << 7)
+#define REG_SECONDS_OS BIT(7)

#define REG_MINUTES 0x04
#define REG_HOURS 0x05
--
2.28.0
\
 
 \ /
  Last update: 2020-11-18 01:29    [W:0.027 / U:3.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site