lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
Date
Convert the Analog Devices ADM1275 bindings to dt-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
.../devicetree/bindings/hwmon/adm1275.txt | 25 --------
Documentation/hwmon/adm1275.rst | 2 +-
3 files changed, 59 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt

diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
new file mode 100644
index 000000000000..2cad28c499dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+ that offer digital current, voltage, and power monitoring using an on-chip,
+ 12-bit analog-to-digital converter (ADC), communicated through a PMBus
+ compliant I2C interface.
+
+ Datasheets:
+ https://www.analog.com/en/products/adm1294.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1075
+ - adi,adm1272
+ - adi,adm1275
+ - adi,adm1276
+ - adi,adm1278
+ - adi,adm1293
+ - adi,adm1294
+
+ reg:
+ maxItems: 1
+
+ shunt-resistor-micro-ohms:
+ description:
+ Shunt resistor value in micro-Ohm.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-sensor@10 {
+ compatible = "adi,adm1272";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
deleted file mode 100644
index 1ecd03f3da4d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-adm1275 properties
-
-Required properties:
-- compatible: Must be one of the supported compatible strings:
- - "adi,adm1075" for adm1075
- - "adi,adm1272" for adm1272
- - "adi,adm1275" for adm1275
- - "adi,adm1276" for adm1276
- - "adi,adm1278" for adm1278
- - "adi,adm1293" for adm1293
- - "adi,adm1294" for adm1294
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor-micro-ohms
- Shunt resistor value in micro-Ohm
-
-Example:
-
-adm1272@10 {
- compatible = "adi,adm1272";
- reg = <0x10>;
- shunt-resistor-micro-ohms = <500>;
-};
diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
index ce6528f90e4a..804590eeabdc 100644
--- a/Documentation/hwmon/adm1275.rst
+++ b/Documentation/hwmon/adm1275.rst
@@ -83,7 +83,7 @@ or current scaling. Reported voltages, currents, and power are raw measurements,
and will typically have to be scaled.

The shunt value in micro-ohms can be set via device tree at compile-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
if the device tree is used.

Platform data support
--
2.25.1
\
 
 \ /
  Last update: 2020-11-17 23:10    [W:0.101 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site