lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers
From
Date
On 16/11/2020 21:07, Marc Zyngier wrote:
> Removing the meson-dw-hdmi module and re-inserting it results in a hang
> as the driver writes to HDMITX_TOP_SW_RESET. Similar effects can be seen
> when booting with mainline u-boot and using the u-boot provided DT (which
> is highly desirable).
>
> The reason for the hang seem to be that the clocks are not always
> enabled by the time we enter meson_dw_hdmi_init(). Moving this call
> *after* dw_hdmi_probe() ensures that the clocks are enabled.
>
> Signed-off-by: Marc Zyngier <maz@kernel.org>

Fixes: 1374b8375c2e ("drm/meson: dw_hdmi: add resume/suspend hooks")

> ---
> drivers/gpu/drm/meson/meson_dw_hdmi.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index 68826cf9993f..7f8eea494147 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -1073,8 +1073,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
>
> DRM_DEBUG_DRIVER("encoder initialized\n");
>
> - meson_dw_hdmi_init(meson_dw_hdmi);
> -
> /* Bridge / Connector */
>
> dw_plat_data->priv_data = meson_dw_hdmi;
> @@ -1097,6 +1095,8 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
> if (IS_ERR(meson_dw_hdmi->hdmi))
> return PTR_ERR(meson_dw_hdmi->hdmi);
>
> + meson_dw_hdmi_init(meson_dw_hdmi);
> +
> next_bridge = of_drm_find_bridge(pdev->dev.of_node);
> if (next_bridge)
> drm_bridge_attach(encoder, next_bridge,
>

Acked-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2020-11-17 09:58    [W:0.109 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site