lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 51/78] pinctrl: amd: fix incorrect way to disable debounce filter
Date
From: Coiby Xu <coiby.xu@gmail.com>

commit 06abe8291bc31839950f7d0362d9979edc88a666 upstream.

The correct way to disable debounce filter is to clear bit 5 and 6
of the register.

Cc: stable@vger.kerne.org
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/linux-gpio/df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com/
Link: https://lore.kernel.org/r/20201105231912.69527-2-coiby.xu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pinctrl/pinctrl-amd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -150,14 +150,14 @@ static int amd_gpio_set_debounce(struct
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg |= BIT(DB_TMR_LARGE_OFF);
} else {
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
ret = -EINVAL;
}
} else {
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
pin_reg &= ~DB_TMR_OUT_MASK;
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
}
writel(pin_reg, gpio_dev->base + offset * 4);
spin_unlock_irqrestore(&gpio_dev->lock, flags);

\
 
 \ /
  Last update: 2020-11-17 15:10    [W:0.234 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site